A Groundwork company - serving San Francisco, CA

How to Measure a Window for Replacement? (San Francisco, CA)

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How to Measure a Window for Replacement in San Francisco (And Why One Measurement Won’t Do)

Measure the width at the top, middle, and bottom of the opening, and the height at the left, center, and right, then order to the smallest of those three readings. In San Francisco, those three numbers rarely match, and the smallest one is the only safe spec. A single tape pull in a 1908 row house is how homeowners end up with a custom unit that arrives three weeks later and doesn’t fit.

If the variance is larger than you expected, or the opening is out of square, call us at (866) 320-2646. We measure and verify before anyone orders a thing.

Why the opening at the top and the opening at the bottom don’t agree

In a 1908 row house in the Mission or Noe Valley, your window opening is usually not the same width at the top as it is at the bottom. That’s not a defect. It’s a century of the building doing what wood-frame buildings do: settling on brick foundations, absorbing seismic movement, and letting original plaster creep into the frame depth.

We see the same pattern across the west-side hills too, where marine fog and salt air have had a hundred years to work on timber and fasteners. That climate is also why we spec stainless hardware and galvanized flashing even on small jobs: standard fasteners on the fog belt corrode in a fraction of the time they’d last east of the hills.

Typical variance in San Francisco’s older stock lands between 1/4 inch and 3/4 inch. On badly settled openings, it goes wider. Whichever number you record at the bottom is the one the window has to clear.

The three-point measurement method, done properly

Here’s the sequence we use on any window we’re replacing, whether the unit is a stock Andersen or a custom Marvin sash:

  • Width: measure at the top, middle, and bottom of the opening. Record all three. The smallest is your width.
  • Height: measure at the left, center, and right. Again, smallest wins.
  • Depth: measure the frame depth at the top and both jambs. Plaster reveals often narrow the usable depth, so measure the actual opening, not the trim face.
  • Squareness: pull diagonals corner to corner. If they differ by more than about 1/4 inch, the opening is out of square and needs a pro measure-and-verify.

Write the numbers down with a sketch. Don’t trust your memory, and don’t round up “to be safe.” Rounding up on a custom order is how you get a unit that won’t fit.

Rough opening, daylight opening, or existing frame: which number do you actually order to?

Three different numbers get asked for, and mixing them up is the most common ordering mistake we see in San Francisco.

Daylight opening is the clear glass area you can see through. Useful for comparing styles and light, useless for ordering.

Existing frame is the visible sash and casing in the wall right now. That number tells you what’s there, not what fits once the old unit comes out.

Rough opening is the framed hole in the wall behind the casing. This is the number a manufacturer’s spec sheet wants, and it’s the one you’ll confirm against an Andersen or Marvin order sheet before the unit ships.

For a same-size retrofit, you can often measure the existing frame and match it. For a custom sash or any change in unit style, the rough opening is the number that matters, and it usually isn’t visible until the old window comes out.

The plaster-reveal complication in Victorian homes

This is the detail that causes more misfires on San Francisco jobs than any other. Original plaster window casings frequently extend into the frame depth, reducing the usable rough opening by 3/8 inch or more on each side. The exposed trim is painted over and easy to miss. On paper, the opening measures one thing. In practice, the plaster cheeks eat enough of it to shift the order spec.

We’ve seen this on enough 1880s-1920s Victorian and Edwardian homes that we don’t trust a homeowner measurement for a custom unit anymore. Not because homeowners measure badly; because the wall hides part of the answer.

When a homeowner measurement is enough, and when it isn’t

A tape measurement is genuinely useful information. It tells you whether a project is in the $5,310-$17,700 window replacement range or pushes toward the $9,440-$29,500 impact window range. That’s real budgeting help, and we’re glad to work from your numbers for a preliminary quote.

Once you’re ready to order, that changes. Custom orders require a professional measure-and-verify because the liability sits on the measurement: an incorrect order means weeks of delay and often a non-refundable unit.

At Groundwork Construction Co. of San Francisco, every window job includes a professional pre-order verification measure. That’s the point where Windows & Doors pricing gets locked. It doesn’t get revised after the unit arrives, which is how surprise costs happen on other jobs. The 730-Day Done Right Promise then backs the installation, in writing, for two full years.

What the professional measure adds

  • Confirmation of the rough opening behind the plaster and casing
  • Diagonal check to catch out-of-square openings from settling
  • Frame depth verification against the exact unit spec being ordered
  • A printed, upfront price that stays put after ordering

San Francisco window measurement at a glance

Window type Typical cost range
Window replacement (standard) $5,310-$17,700
Impact window installation $9,440-$29,500

Steep hillside lots and tight urban lots in San Francisco add measurement complexity: scaffolding may be required, and some openings need access from a shared lightwell. We plan that into the number, not after the fact. Background-checked technicians in uniform do the measure, and calls are answered by a live person, 24/7.

For neighborhood-level context on how we handle the full project scope, see our San Francisco service area page.

FAQs

Need Construction help in San Francisco? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch