Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWindow Repair vs Replacement in San Francisco: What to Do With Your Original Wood Windows
Choose repair if your window frame is original wood with sound structure under the surface rot, and choose replacement only when the sash is beyond saving or the frame has lost its structural integrity. In San Francisco’s pre-1930s Victorians and Edwardians, repair is the smarter call more often than most guides admit, because those frames are frequently built from old-growth Douglas fir that no modern lumber can match. Groundwork Construction Co. of San Francisco inspects both directions before quoting either, and you can reach us at (866) 320-2646 for a straight answer.
That 100-year-old double-hung in your Painted Lady isn’t just charming. It may be cut from old-growth Douglas fir with tighter growth rings and higher natural resin content than anything a lumberyard sells today. Before you tear it out, here’s what we actually check first.
Why San Francisco’s Old Windows Are Different From Anywhere Else
The city’s fog belt does a number on wood, but not the number most homeowners fear. Marine damp and salt air from the Pacific and Bay chew through paint film and work their way into sash joints, which is why so many original windows on the west-side hills look rough. What those surface failures hide is a frame that can still be structurally sound.
Old-growth Douglas fir holds up because its tight grain resists moisture penetration far better than the fast-grown modern lumber used in replacement sashes. When we open up a window in Noe Valley or the Haight and find solid wood under peeling paint and darkened joints, that’s the tell. The rot is cosmetic, sitting in the paint layer and the outer millimeter of wood, not eating through the rail. A well-executed repair on that kind of frame can extend its life by decades rather than years.
Here’s the operator detail most guides skip: we separate cosmetic degradation from true structural rot before we quote. That means probing the sill and the lower rail, checking whether the joint has separated or the wood has gone soft all the way through. A window that’s soft for a quarter inch tells a very different story than one that gives when you press a screwdriver into the rail.
What San Francisco’s Design Rules Mean for Your Decision
This is the variable that flips the whole calculation. The San Francisco Planning Department and many neighborhood design-review boards actively discourage or restrict full replacement of original wood windows on contributing structures. In Noe Valley, the Castro, and the Haight, pulling out original windows on a historic home can trigger a review that adds months and real cost, and sometimes the answer is simply no.
So the repair-vs-replace call isn’t only about money or longevity. On a contributing structure, repair may be the only code-compliant path forward. We check what your building falls under before we recommend anything, because a replacement quote that can’t get permitted is worse than useless.
That concern is real across the city. Building on and beside steep hills in one of the densest, most historic urban cores in the country means nearly every project runs through tight lots and a discretionary planning gauntlet. Windows are no exception.
How We Decide: Repair or Replace?
We walk through four checks, in order, before recommending a direction.
- Wood species and grain: Is the frame original old-growth Douglas fir, or has it already been swapped for pine or a modern fir sash? Original dense stock leans repair.
- Rot depth: Surface paint failure and joint separation are repairable. Soft wood through the full thickness of the sill or rail leans replace.
- Historic status: Contributing structure with design review? Repair protects your permit path. Non-contributing or already-altered? Replacement opens up.
- Hardware and operation: Sash weights, pulleys, and cords are replaceable. A racked frame that won’t seat in the jamb is a stronger case for new units.
If you want the full picture of what we handle on this trade, our Windows & Doors page lays out the work, and our home page covers everything else.
When Replacement Is the Right Call
Sometimes it is. If the frame is racked, the wood is soft all the way through, or the building isn’t subject to historic review, replacement wins on performance and comfort. The question is what you put back in.
We spec Andersen and Marvin units, both of which offer wood-interior, fiberglass-exterior options built for high-moisture coastal climates. That’s deliberate. Vinyl-only “availability specials” are what many contractors default to because they’re easy to source, but they don’t hold up the same way and they don’t match the interior look of a period home. We also bring stainless hardware and galvanized flashing to the job, not because it’s fancy but because standard fasteners corrode fast in the fog belt and ocean salt.
What Does Window Repair vs Replacement Cost in San Francisco?
Repair is almost always cheaper than replacement on a per-window basis, and in a historic home it can also save you months of permitting. Here’s how the ranges shake out in this market.
| Option | Typical Cost Range | Best For |
|---|---|---|
| Window repair (sash, joint, sill, paint-film) | Often a fraction of replacement; quoted per window after inspection | Original old-growth frames with surface rot |
| Window replacement | $5,310-$17,700 | Racked frames, full-thickness rot, non-historic structures |
| Impact window installation | $9,440-$29,500 | Upgrading to impact-rated units |
Replacement is priced as a project, and the range depends on unit count, size, and material line. Repair is priced after inspection because the answer depends on what we find under the paint. The one thing that doesn’t vary: you get upfront pricing, the number you see is the number you pay, and every job is backed by our 730-Day Done Right Promise. That guarantee covers both repair and replacement work, so we’re never nudging you toward the higher ticket just to pad a bill. We’re fine either way, and so is your wallet.
The Comparison, Side by Side
| Factor | Repair | Replacement |
|---|---|---|
| Cost | Lower | Higher |
| Historic-home permitting | Usually smoother | Can trigger design review |
| Preserves old-growth fir | Yes | No |
| Energy performance | Improves with weatherstripping and glazing | Stronger with modern insulated units |
| Lifespan of result | Decades on a sound frame | Decades on a well-spec’d unit |
| Best when | Frame is sound, rot is cosmetic | Frame is racked, rot is structural |
FAQs
Repair is cheaper than replacement in nearly every case, and on a historic home it can also avoid a design-review process that adds months. The only time replacement makes better financial sense is when repair would be a patch on a frame that’s already failing structurally. Call (866) 320-2646 for an exact quote, and estimates are free.
Look at the grain and the frame construction: old-growth fir shows tight growth rings and a denser, heavier feel than modern pine or fir. A contractor can confirm on inspection by checking the wood under the paint and the joinery style. If you’re unsure, our team can tell you when we’re out for a free estimate.
Sometimes, but contributing structures often face Planning Department or neighborhood design-review limits on full replacement, so repair may be the only compliant path. The answer depends on your specific building and neighborhood. Call (866) 320-2646 and we’ll walk through what applies to your home.
Yes. We offer 0% financing for 18 months, plus $1,000 off projects over $10,000, so a larger replacement doesn’t have to be an all-cash decision. That said, if repair is the honest call, we’ll tell you. Reach us at (866) 320-2646 and we’ll get you a clear number.
If you’d rather have it looked at, Groundwork Construction Co. of San Francisco offers a no-pressure assessment in San Francisco - call (866) 320-2646. Our technicians have up to 12 years of experience, arrive in uniform, and answer the phone with a live person 24/7. From San Francisco service area to every corner of the city, we help you decide before we ever quote.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.