Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWrought Iron Fence Cost in San Francisco, CA: What You’ll Actually Pay
Wrought iron fence cost in San Francisco runs $4,130 to $10,620 for a typical residential run, and the number that surprises homeowners isn’t the install price, it’s the maintenance budget behind it. Salt air and fog belt damp make corrosion the real lifecycle cost driver on any iron fence in this city. Call (866) 320-2646 and we’ll walk your property, check the soil and exposure, and give you a written estimate that includes what the finish will need over the next decade, not just what goes in the ground next month.
A wrought iron fence on a painted Victorian near Alamo Square looks exactly right, and it costs more to keep looking right than anywhere else in the Bay Area. The marine layer off the Pacific starts working on a topcoat before it’s fully cured. That’s the reality we price for, and it’s why we build the maintenance cycle into the bid rather than letting it surprise you four winters in.
What’s the Real Cost Breakdown on a Wrought Iron Fence in San Francisco?
Four line items drive the price, and most quotes you’ll get only show you two of them.
| Cost Component | Typical San Francisco Range |
|---|---|
| Fabrication or unit cost (steel panels, posts, pickets) | $2,100-$5,300 |
| Finish: powder coat vs. field-applied paint | $580-$1,650 |
| Installation (footings, rocky clay, hillside access) | $1,200-$2,900 |
| 10-year maintenance allowance (repaint cycle) | $250-$770 per repaint, 1-3 cycles |
| All-in first-year range | $4,130-$10,620 |
Two things move you up or down that table fast. First, true wrought iron is rare and expensive: most residential “wrought iron” fences sold today are mild steel, and that’s not a downgrade as long as the finish system is right. Second, hillside lots and tight parcels complicate footings. A lot off a steep west-side street where the fog sits heavy can push install cost up because post bases need stainless hardware and galvanized anchors, not because the panels cost more.
We keep the parts list on the ground honest, which is why our Fence Installation crews spec stainless fasteners on coastal jobs even when the standard hardware is perfectly fine inland. It’s a small line item that saves you a corrosion repair later.
Why Does the Fog Belt Change Your Maintenance Math?
Repaint cycles in San Francisco run roughly every 3 to 5 years on west-side properties and 7 to 10 years on inland lots. That gap is the single biggest cost difference between one iron fence and another nearby, and it has nothing to do with the fence itself.
Salt-laden air and persistent damp attack the finish from the outside in, and the failure starts at the welds and joints. Those are the tight spots where moisture collects and where a paint or powder coat is thinnest. A fence can look perfectly solid at eye level while the post bases and picket welds are already compromised inside the first decade if the seal isn’t maintained.
- Powder coating costs more upfront but significantly stretches the repaint interval in salt air because it goes on thicker and cures harder than field paint.
- Field-applied paint is easier to touch up but needs recoating sooner, and the cycle is unforgiving once the fog season starts.
- Undersealing at the footings and sealing welds during fabrication keeps moisture from getting a foothold at the joints.
- A scheduled inspection catches rust telegraphing through the finish before it reaches the steel underneath.
Part of the flow of the site can also work against drainage. Where the hillside runs into the tree belt, we see corrosion hot spots first, which is why we look at drainage as well as the fence itself. We handle finish and footing work as part of our home services, and we inspect under the same standard we build to.
Is Wrought Iron the Right Choice for San Francisco’s Housing Stock?
For most of the 1880s-to-1920s Victorian and Edwardian wood-frame row houses across the city, yes. Iron is architecturally correct for that era, and in historic and conservation districts it’s often the only fence material that clears design review. That’s not aesthetic preference talking; it’s the difference between a permit and a rejection.
San Francisco’s build environment adds hurdles most fence projects never see. Tight lots, steep access, and pre-1906 gold-rush-era parcels mean a fence that would be a two-day job elsewhere can stretch to a week. Our technicians have up to 12 years of experience and know how to sequence a small fence install so it doesn’t collide with other work on the property. Every project lands under our 730-Day Done Right Promise: if rust telegraphs through the finish at a weld or a footing fails within that window, we make it right, not excuse it.
We use premium exterior brands like PGT and CGI for adjoining window and door work when a fence project touches the house envelope, so the weatherproofing story stays consistent from one trade to the next. From foundation to finish line, one contractor, one accountable schedule.
FAQs
Expect $4,130 to $10,620 for a typical residential run, with the maintenance allowance built in. That range covers fabrication, finish, installation and the first repaint cycle. Call (866) 320-2646 for an exact quote, estimates are free and we’ll price the finish system to your exposure.
Every 3 to 5 years on the foggy west side, and 7 to 10 years on inland parcels. Choosing powder coat over field paint at install stretches the interval and offsets the higher upfront cost over the fence’s life. We’ll show you both finish options side by side.
Repair usually wins if the rust is limited to the finish and a few welds, while replacement makes more economic sense once the post bases are compromised. A corrosion inspection answers that in an hour on site. Call (866) 320-2646 and we’ll tell you which side of that line your fence is on.
Yes, with the right footings and stainless hardware spec’d for the exposure. Slope and soil type drive the footing cost, and we walk the grade before quoting so there are no surprises mid-install. Upfront pricing, no surprises, live person on the phone 24/7.
Get Your Wrought Iron Fence Priced for San Francisco’s Reality
We’re Groundwork Construction Co. of San Francisco, and we price fences here the way this city actually demands: finish systems that survive the fog, footings that hold on rocky clay, and a warranty that covers the workmanship behind both. Call (866) 320-2646 for a free estimate and a project design consult, and we’ll hand you a number that includes the repaint math up front.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan