Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Driveway Sealing Cost in San Francisco, CA?
Driveway sealing in San Francisco typically runs $295 to $825 for a standard residential driveway, which works out to roughly $0.75 to $2.50 per square foot depending on material, prep work, and the sealer type. That range is for a properly prepped job: washed, crack-routed, and matched to the right product for your slab. If you want a firm number instead of a range, call Groundwork Construction Co. of San Francisco at (866) 320-2646 and we’ll price it from the driveway itself. Homeowners in the fog belt who seal every two to three years keep their slabs from turning into a sponge.
Read that opening warning carefully before you book anybody. In Phoenix, sealing is UV maintenance you get to every four or five years. On San Francisco’s west-side hills, it’s moisture defense, and it’s on a much tighter clock. Marine fog rolls over Vincente and the Inner Sunset most of the year, and that wet-dry cycling is what destroys an unprotected driveway long before sun ever does. Choose the wrong sealer and you’ll watch it peel off a surface that was never dry enough to bond. The product matters as much as the price, and most cost guides talk about neither.
Why San Francisco Drives the Price Differently Than Other Cities
Sealing costs more here not because contractors are gouging but because the environment asks more of the job. Salt particulate from the Pacific settles on west-side driveways constantly. On concrete, that means chloride ions work their way into the slab. A film-forming sealer laid over that doesn’t keep chloride out; it traps moisture underneath and pushes the freeze-thaw stress into the surface, which is where spalling starts. A silane/siloxane penetrating sealer bonds chemically into the concrete and blocks chloride ingress while letting the slab breathe. That’s the product we specify on the fog-belt side of San Francisco, and it costs a bit more per square foot than the big-box acrylic another bidder might quote you.
Asphalt is its own story. Standard oil-based sealers soften and never fully cure in cool-damp conditions, so they track black streaks into the garage for weeks. On an asphaltic driveway in San Francisco, a coal-tar emulsion or an acrylic product rated for high-moisture environments is the right call. It’s a straightforward thing to get right once you’ve stopped treating every driveway the same way across the country.
And tiles aren’t immune. Contractors here learn to spec stainless and galvanized fasteners even on small jobs, because the marine air corrodes standard hardware and paint fast. A paver-sealing walkthrough is where we usually catch failing joints before they become a bigger rebuild. If you’re weighing the whole surface, Driveway & Pavers covers the construction side this sealing work protects.
What Should You Look for Before You Book a Sealer?
Ask what’s actually included in the prep. This is the single most reliable way to tell a lasting job from a cheap coat. Here’s the comparison we’d want a homeowner to run, whether they hire us or somebody else:
- Crack prep. Real prep means routing the cracks wide and filling them with a flexible sealant, not smearing goo over a hairline that reopens in a week. Cut-rate sealers skip this because it’s the slowest part of the day.
- Cleaning. A power wash and dry time on concrete; on asphalt, a clean and oil-spot primer. Seal over dirt or grease and you’re paying for nothing.
- Sealer type matched to the slab. Penetrating silane/siloxane on concrete, coal-tar or acrylic on asphalt. A quoted price that doesn’t name the product is a quote you can’t compare.
- Weather window. Sealing on the wrong side of a fog week is how bubbling happens. Ask when they plan to apply and why.
- A written care plan. You should walk away knowing your resealing interval and what to watch for between coats.
Our technicians have up to 12 years of experience on Bay Area driveways and know which side of a San Francisco street dries down first. Every job carries our 730-Day Done Right Promise: if it isn’t right, we make it right. And because our line is answered by a live person 24/7, a homeowner who spots the sealer bubbling after a heavy fog week can call the same day instead of leaving a voicemail that might sit until Monday.
Driveway Sealing Cost in San Francisco: What Each Line Item Runs
Below are the ranges we hold to, so you can sanity-check any bid you get. Prep and material drive the spread more than total square footage does.
| Item | Typical San Francisco Range |
|---|---|
| Driveway sealing (standard residential) | $295 - $825 |
| Asphalt driveway paving (full surface) | $4,130 - $10,620 |
| Concrete driveway installation | $5,310 - $14,160 |
| Paver driveway installation | $8,260 - $21,240 |
| Driveway replacement | $5,900 - $16,520 |
That $295 on the low end assumes a small, clean, prepped surface. The $825 figure reflects a larger drive with crack routing and a premium penetrating sealer. For any full-surface project, our Driveway & Pavers in San Francisco page lays out the construction numbers. When you’re ready for the whole driveway, whether sealing or replacing, we use materials from brands like Quikrete and Cambridge Pavers so the surface and its protection are specified for this climate from the start. Imagine pairing a fresh Quikrete concrete pour with a penetrating sealer on the ocean side of the city – that’s a driveway that stays put through a decade of fog.
How Do You Know When It’s Sealing Year?
You’ll start seeing lighter, dry-looking patches after a rain, or the surface takes on a chalky tone. Run water on it: if it soaks in fast instead of beading, the sealer is spent. On a coastal slab in San Francisco, that usually lands in the two-to-three-year window, and pushing to year five is where moisture intrusion gets expensive.
The steeper the hillside, the more this matters, because water doesn’t just sit – it moves. San Francisco’s tight lots and steep lots mean a failed seal sends water toward a foundation far faster than it would on flat suburban ground. Asphalt driveways on the slopes want the most consistent schedule. We hand every homeowner a written care plan as part of the job, so the resealing interval is on paper rather than guesswork.
FAQs
Driveway sealing in San Francisco costs $295 to $825 for most residential driveways, or about $0.75 to $2.50 per square foot. The range shifts with surface size, crack prep, and whether the job calls for a penetrating silane/siloxane on concrete or an acrylic/coal-tar on asphalt. Call (866) 320-2646 for an exact quote – estimates are free.
Sealing is almost always cheaper – a few hundred dollars versus thousands – as long as the slab is structurally sound. Concrete installation runs $5,310 to $14,160, while asphalt paving is $4,130 to $10,620. If the cracking is widespread and concrete is failing to the base, sealing just hides a problem, so we’re upfront when replacement makes more sense. Call (866) 320-2646 to find out which side you’re on.
Often, yes. Our line is answered by a live person 24/7, so peeling or bubbling after a fog week gets a real conversation the same day. We’ll tell you whether it’s a quick recoat or a strip-and-reseal that fits the 730-Day Done Right Promise. Call (866) 320-2646 whenever you spot it.
Every two to three years in the fog and salt belt, versus four to five years in a dry, high-UV climate. Ocean-side and west-side hills get the shorter end. Each Groundwork project includes a written care plan with your resealing interval built in.
If your driveway is due and you want a straight number from someone who’s actually looked at the slab, get a free estimate and design consult. We answer live at (866) 320-2646 around the clock, price it upfront, and back the work in writing. Reach out today and we’ll tell you what your San Francisco driveway needs.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan