Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow to Fix a Sinking Driveway in San Francisco: Fix the Sub-Grade or Fix It Again
If your driveway is sinking in San Francisco, the short answer is this: the problem is almost always under the slab, not the slab itself. Uniform settlement from compaction failure is fixable with slabjacking or polyurethane foam injection. Differential sinking on a sloped lot – where one side drops faster and cracks open – usually means hillside soil creep or eroded fill is moving under the pavement, and that has to be addressed structurally before anything gets poured. Fix the wrong one and you’ll be back here in two years. For a no-pressure structural assessment, call Groundwork Construction Co. of San Francisco at (866) 320-2646.
Key Takeaways
- Uniform sinking (the whole slab drops evenly) usually means compaction failure and can often be lifted.
- Differential sinking (one corner or edge drops, with shearing cracks) on an SF hillside lot points to soil creep or washed-out fill.
- Any repair that touches a retaining wall or changes drainage on a sloped lot likely needs a DBI permit review.
- A contractor who quotes before probing the soil and surveying elevations across the slab is guessing with your money.
If you want the broader picture of how we approach hardscape surfaces, the full Driveway & Pavers service page walks through materials and base construction in detail.
Why San Francisco Driveways Sink Differently Than Anywhere Else
We’ve assessed driveways across the city and the pattern is remarkably consistent: the fill under the slab is moving, not settling. That distinction matters because the fixes are completely different.
The root of it is the housing stock. Much of San Francisco’s dense mix of 1880s-1920s Victorian and Edwardian row houses sits on lots that were rough-graded and backfilled with organic material during the city’s rapid rebuild after 1906. That fill was never engineered. It’s been compressing and migrating downhill for more than a century, and every wet season nudges it a little further. Add marine fog, persistent damp, and salt air from the Pacific, and you get constant moisture cycling that softens the sub-grade under pavement.
On the west side hills, contractors learn to spec galvanized flashing and stainless hardware on even small jobs because the fog belt and ocean salt corrode standard fasteners faster than anywhere else in the Bay Area. Driveway base material isn’t exempt from that math. When water gets under a slab and the fill beneath is eroding, the pavement has nothing to sit on.
Uniform Settlement vs. Differential Sinking: How to Tell the Difference
This is the diagnostic that keeps homeowners from paying twice. The fix depends entirely on which failure mode you have.
- Uniform settlement (compaction failure): The slab drops evenly, hairline cracks are consistent across the surface, and there’s no obvious tilt. The fill under the slab compressed but stayed in place. Slabjacking (pumping grout under pressure) or polyurethane foam injection can lift the slab back to grade, usually in a single day.
- Differential sinking (soil creep or eroding fill): One corner or edge is significantly lower than the rest, cracks open wider at one end, and the slab may be pulling away from the garage apron or a retaining wall. The fill is actively migrating downhill. Lifting this slab without first stabilizing the sub-grade is money thrown away.
On a sloped SF lot, the second scenario is the dominant one. The uphill retaining structure, the drainage path, and the soil below the slab all have to work together – and if any one of them has failed, patching the surface guarantees a repeat failure within two years.
The Diagnostic Steps a Contractor Should Do Before Quoting
Before anyone gives you a number, they should be on their hands and knees doing three things. If a contractor skips these and quotes off a photo, walk away.
- Soil probe under the slab: Confirms whether the fill is soft, saturated, or eroded, and where the voids are.
- Elevation survey across the slab: Measures how much each section has dropped. This is what separates a uniform settlement from a differential failure.
- Inspection of the uphill retaining structure: Checks for lean, movement, or failed drainage behind the wall. If the wall is compromised, no amount of slab lifting holds.
At Groundwork Construction Co. of San Francisco, background-checked, uniformed technicians perform that on-site structural assessment before any quote. No upselling, no guesswork – we tell you what cause we’re looking at before we tell you what it costs. Our technicians have up to 12 years of experience on this kind of work.
How Much Does It Cost to Fix a Sinking Driveway in San Francisco?
Cost depends on whether you’re lifting a uniformly settled slab or stabilizing a differential failure, but here’s the range we quote in the city. Pricing is upfront – the number you see is the number you pay.
| Repair Scope | Typical Cost Range |
|---|---|
| Driveway sealing (maintenance only) | $295-$825 |
| Concrete driveway installation (full replacement) | $5,310-$14,160 |
| Driveway replacement | $5,900-$16,520 |
| Paver driveway installation | $8,260-$21,240 |
| Asphalt driveway paving | $4,130-$10,620 |
Slabjacking or foam injection on a settled section typically lands well below a full replacement, which is why accurate diagnosis matters – it can save you four figures. If the sub-grade needs structural remediation first, that work is quoted separately and honestly before we touch a surface.
The Permit Reality on Hillside SF Lots
Here’s something generic DIY guides never mention: any driveway repair that touches a retaining wall or alters drainage on a hillside lot in San Francisco likely triggers a Department of Building Inspection (DBI) permit review. That adds timeline and cost to the job – and skipping the permit because your contractor says “we don’t need one for this” can leave you exposed at the next sale.
The combination of hillside foundations, neighborhood design review, and SF’s discretionary planning process can stretch a structural repair well beyond what homeowners expect. We factor that into the schedule before we start, not after. When we install pavers on a sloped lot, we also spec properly bedded base and drainage first, whether the job calls for Techo-Bloc or Cambridge Pavers, because permeability is not optional on a hill.
FAQs
Slabjacking or foam injection typically costs less than a full replacement, while a complete concrete driveway installation in the city runs $5,310-$14,160 depending on slope, access, and drainage work. A paver driveway installation runs $8,260-$21,240. Small surface issues sometimes fall into sealing territory at $295-$825. The exact number depends on whether the sub-grade needs stabilizing first. Call (866) 320-2646 for a free on-site structural assessment and an upfront quote.
Repair is usually cheaper when the slab is intact and the fill under it only needs lifting, so slabjacking or foam injection often saves four figures against replacement. Replacement becomes the better call when the slab is cracked through, the sub-grade is actively eroding, or the grading over a hillside lot is beyond saving. The right answer starts with the diagnostic, not the price. Call (866) 320-2646 and we’ll tell you which one you’re facing.
Same-day availability depends on scheduling, but our phone line is answered by a live person 24/7 – no voicemail, no waiting until Monday. Describe what you’re seeing (tilt, cracks, water pooling), and we’ll get a technician out to probe the soil and survey the slab before anyone quotes a number. Call (866) 320-2646 and we’ll find the soonest slot.
Because the surface was patched without addressing the cause – usually hillside soil creep or eroded fill on a sloped San Francisco lot. When the sub-grade keeps migrating, a new pour or overlay just rides along with it. That’s the exact mistake we built our process around, and our 730-Day Done Right Promise covers both the repaired surface and the sub-grade work behind it: if it’s not done right, we make it right.
If you’d rather have it looked at, Groundwork Construction Co. of San Francisco offers a no-pressure assessment in San Francisco – call (866) 320-2646. We’ll probe the soil, survey the slab, and give you a straight answer on whether you’re looking at a lift or a rebuild. Upfront pricing, no surprises. From foundation to finish line.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.