Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterPrefab ADU vs Custom Built ADU in San Francisco: Choose Custom Unless You’ve Already Cleared Design Review and Have a Flat Lot
For most San Francisco parcels, choose a custom-built ADU over prefab. Prefab wins only when your lot is flat, your block has no design review or historic overlay, and your manufacturer will warrant delivery on your grade. That’s a narrow slice of the city. On the Edwardian and Victorian blocks that make up so much of San Francisco’s housing stock, and on the hillside lots in Noe Valley, Bernal Heights and the Sunset, the city’s planning gauntlet usually decides the question before you pick a floor plan. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free, no-pressure assessment before you sign with a modular factory.
Why San Francisco’s Permit Clock Rewrites the Prefab Timeline
Prefab ADU companies advertise 90-day builds, and they mean it – for the factory portion. San Francisco’s Planning Department averages 6 to 18 months of discretionary review before a single panel gets craned onto your lot, and that clock restarts if your modular unit fails design compatibility screening for your block. A factory timeline that assumes a clean approval is a sales number, not a delivery date.
San Francisco’s neighborhood design review, and Historic Preservation review in many districts, requires an ADU to match the character of the primary structure. A flat-panel modular box routinely fails compatibility screening on 1890s-1920s Edwardian blocks. Custom design absorbs those review comments from the start, because the drawings can be revised. A prefab catalog can’t be.
This is where San Francisco earns its reputation. Nearly every project involves tight lots, hillside foundations, and a planning process that can take a year or more before a shovel hits dirt. The city’s pre-1906 gold-rush-era and post-1906 rebuild stock, its soft-story seismic retrofit mandates, and neighborhood design review make permitting and structural work here unlike anywhere else in the Bay Area. You are not building an ADU in a suburb with a flat lot and a 30-day over-the-counter approval. You are threading a new dwelling onto a slope, beside a neighbor’s 1912 foundation, inside a review process that reads your elevations line by line.
The Grade Problem: Hillside Lots Break Prefab Warranties
Noe Valley, Bernal Heights and the Sunset are full of grade differentials that require custom foundation engineering. Prefab manufacturers void warranties and refuse delivery on slopes above 5 to 8 percent, and that covers the majority of San Francisco’s residential parcels. Read the warranty language before you fall in love with a showroom unit. A slope that looks gentle from the street can be well past the manufacturer’s delivery threshold once you survey it.
Custom construction engineers the foundation to the actual grade, with the retaining, drainage and underpinning the site needs. On the west side of the city, that also means specifying stainless hardware and galvanized flashing even on small jobs. The fog belt and ocean salt corrode standard fasteners and exterior paint within a fraction of the normal lifespan, and marine damp drives rot into exposed timber. A prefab panel delivered from a dry inland factory has no idea what it’s landing in.
Soft-Story Seismic Retrofit: The Coordination Problem Prefab Creates
Much of San Francisco’s older multifamily and wood-frame stock needs soft-story seismic retrofit, and an ADU conversion on the same building often intersects with that scope. A custom builder can engineer both under one contract and one set of drawings. A prefab company hands you a second contractor, a second permit, and a coordination problem you now have to manage yourself. If the retrofit and the ADU share a foundation and share shear walls, they should share a designer and a builder. Splitting them is how you get two crews blaming each other for the same crack.
Prefab vs Custom Built ADU: Side-by-Side for San Francisco
| Factor | Prefab / Modular ADU | Custom-Built ADU |
|---|---|---|
| Design review fit | Fixed catalog; fails compatibility on many Edwardian blocks | Drawings revised to match the block’s character |
| Hillside lots (slope over 5-8%) | Manufacturer may void warranty or refuse delivery | Foundation engineered to the actual grade |
| Soft-story retrofit overlap | Separate contractor and permit | Engineered and built under one contract |
| Permit revisions | Factory change orders add cost and time | Plan revisions handled during design |
| Liability on defects | Split between manufacturer and installer | One accountable contract |
| Quoted cost basis | Often excludes site prep, crane, and permit revisions | Upfront pricing that includes the full scope |
What an ADU Actually Costs in San Francisco
ADU construction in San Francisco runs $106,200 to $259,600, and garage conversions run $35,400 to $94,400. Those ranges reflect the full build – foundation, framing, systems, finishes, and the site work that prefab quotes typically leave out. When comparing a prefab bid to a custom bid, add the site prep, delivery crane, and permit-revision cost the prefab quote excluded. The gap narrows fast.
| Project | San Francisco Range |
|---|---|
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
| Home Addition | $53,100 – $153,400 |
Groundwork makes the custom route financially workable with no-hassle upfront pricing – the number you see is the number you pay – plus 0% financing for 18 months and $1,000 off projects over $10,000. Our technicians have up to 12 years of experience, and every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. With a prefab, that promise has no single owner. With a custom build, it does. Our Home Additions & ADU team handles the design, the permit, and the build under one roof, and we bring in Kohler and Moen fixtures when the finishes matter.
When Prefab Actually Makes Sense in San Francisco
- Your lot is flat and you’ve confirmed the slope is well under the manufacturer’s delivery threshold.
- Your block has no design review or historic overlay, or you’ve already cleared compatibility screening with your modular unit’s elevations.
- You have no soft-story retrofit scope on the primary building.
- You’ve read the warranty language and understand who’s accountable when a defect shows up after move-in.
If you can check all four, a prefab unit can save time on the factory floor. If you can’t, custom is not a luxury choice in San Francisco – it’s often the only viable path to a completed, permitted, warrantied ADU. If you’re still deciding between an ADU and other additions, our home page lays out the full scope of work we handle across San Francisco.
FAQs
Sometimes on paper, rarely in practice. A prefab quote often leaves out site prep, the delivery crane, and permit revisions, and those add up fast on a San Francisco hillside lot. Once you add them, custom ADU construction at $106,200 to $259,600 is frequently comparable. Call (866) 320-2646 for an exact, upfront quote – the number you see is the number you pay.
Yes, but it’s harder than the sales pitch suggests. Design review and historic preservation review require an ADU to match the character of the primary structure, and a flat-panel modular box routinely fails compatibility screening on Edwardian and Victorian blocks. Custom design can revise the drawings to fit. Call (866) 320-2646 to talk through your block before you commit to a factory unit.
Often not. Most manufacturers void warranties and refuse delivery on slopes above 5 to 8 percent, and that covers the majority of San Francisco’s residential parcels. Custom construction engineers the foundation to the actual grade. Call (866) 320-2646 for a free site assessment before you sign with a factory.
Yes. On older wood-frame buildings, the retrofit and the ADU often share a foundation and shear walls, so they should share one designer and one builder. A custom build keeps both under one contract and one accountable party. Call (866) 320-2646 – our team answers live, 24/7.
If you’d rather have it looked at, Groundwork Construction Co. of San Francisco offers a no-pressure assessment in San Francisco – call (866) 320-2646. We’ll review your lot, your block’s review requirements, and whether prefab or custom actually fits, then give you a straight answer either way.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.