Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Francisco Homeowners Choose GAF Construction
We provide independent GAF construction service in San Francisco: roof repair, full replacement, and gutters on Timberline shingle roofs, Liberty modified bitumen, and EverGuard TPO low-slope systems, installed and detailed correctly for this city’s fog belt and hillside housing stock. We’re an independent GAF service provider, not affiliated with or authorized by GAF, so we recommend the right GAF system for your roofline and tell you honestly when another product fits better. Our technicians have up to 12 years of experience, every job carries our 730-Day Done Right Promise, and pricing is upfront before work starts. Call (866) 320-2646 to schedule a free estimate.
Key Takeaways
- We install and repair GAF shingle, modified bitumen, and TPO roof systems across San Francisco without a manufacturer sales program tying our hands.
- Granule loss, nail placement defects, aged-out underlayment, and moisture-trapping venting are the GAF failures we see most in this city’s marine climate.
- Every tear-off includes a written line-item quote and coverage under the 730-Day Done Right Promise.
Why Trust Groundwork Construction Co. of San Francisco for Your GAF Construction?
Our technicians work on GAF systems every week, so they recognize the difference between a Timberline HDZ roof that’s merely weathered and one whose nailing strip has already been compromised by overdriven fasteners. That’s a distinction you can’t see from the ground, and it decides whether a repair holds through the next winter or fails at the first wind event. We match shingles to the existing GAF line and color wherever the original system is still manufacturable, because a mismatched course of Timberline reads as a repair patch for the rest of the roof’s life and complicates any future warranty conversation. Genuine GAF accessory components – starter strips, ridge caps, underlayment – go on wherever the existing system supports them.
Every technician is background-checked and arrives in uniform. Pricing is written before we start: the number you see is the number you pay. From foundation to finish line, we handle production, dry-in, and detailing without handing your roof to a separate sub who never read the original spec.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common GAF Construction Problems We Fix in San Francisco
These are the GAF failures that show up repeatedly on San Francisco roofs, and what’s actually behind each one.
- Timberline granule loss and blistering on fog-belt and west-facing roofs. Marine moisture and morning condensation break down the asphalt mat faster than the shingle’s rated life suggests, so a roof on an outer Sunset or Richmond slope can shed granules years ahead of schedule. Once the mat is exposed, the shingle is done – top-coating won’t bring it back.
- Nail placement errors on Timberline HDZ. High nails and overdriven fasteners that don’t fully engage the nailing strip are the single most common cause of shingle blow-off in our winter wind events. The shingles look fine until the first real gust peels a field back and you can see the fasteners sitting proud of the strip.
- Aged-out underlayment and inadequate attic ventilation. Older GAF systems often trap moisture under shingles that still look intact, and that moisture rots decking and produces repeat leaks at the ceiling stain long after a surface patch was applied. Venting corrected at install is what stops the cycle.
- Patched penetration and wall/roof transitions on low-slope areas. Flat-roofed rear extensions and additions across San Francisco are commonly topped with Liberty or EverGuard systems where leaks at drains, scuppers, and wall transitions got smeared over with mastic instead of properly detailed with correct flashing and termination.
- Deck rot found underneath a sound-looking surface. Salt air and persistent damp corrode standard fasteners and soften sheathing on exposed timber, so a re-roof that starts as a shingle job sometimes reveals compromised decking. We inspect before quoting, so this lands in the estimate instead of a mid-job surprise.
GAF Parts & Our Repair-vs-Replace Approach
Genuine GAF shingles, accessory underlayment, starter and ridge products go on wherever the existing system allows, with correct color and profile matching so the repair blends and stays warranty-defensible. Quality aftermarket equivalents get considered only when you have no warranty stake to protect and the budget genuinely decides the call. We don’t claim to stock GAF parts locally; components are sourced per job once scope is set, which also keeps you from paying for material you don’t need.
On a 20-year-old Timberline roof with widespread granule loss, honest advice is usually full replacement over patching – a repair buys a season, not a decade. Isolated damage on an otherwise sound roof is repairable, and we say so. Call (866) 320-2646 and we’ll scope it before recommending either.
Our GAF Service Process – Step by Step
- 1
Diagnosis. We walk the roof, check the nailing pattern on Timberline HDZ courses, probe decking at valleys and penetrations, and look at venting in the attic – not just the shingles.
- 2
Written scope and pricing. You get a line-item quote covering tear-off, underlayment, GAF system components, ventilation corrections, and gutters before anything is ordered. The number you see is the number you pay.
- 3
Install or repair. Genuine GAF system layers go down in the correct order, with ice-and-water and underlayment detailed at transitions. Penetrations and flat-roof edges get proper flashing, not mastic.
- 4
Test and walkthrough. We check drainage at scuppers and downspouts, verify venting, and walk the finished roof with you.
- 5
Warranty and final paperwork. You receive GAF manufacturer documentation plus our 730-Day Done Right Promise: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterGAF Products We Service & Install in San Francisco
We work across the GAF lines that actually appear on San Francisco roofs:
- Timberline HDZ – architectural asphalt shingles, the most common steep-slope system in the city.
- Timberline UHDZ – the heavier architectural shingle line, on newer premium re-roofs.
- Liberty SBS Self-Adhered Modified Bitumen – low-slope surfaces on rear extensions and additions.
- EverGuard TPO single-ply – flat and low-slope roofs where a membrane beats bitumen.
If your roof carries an older GAF line, we’ll identify it and tell you what’s realistically repairable.
We Also Service These Brands
GAF is one brand in a curated portfolio, not the whole picture. We also work with KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Kohler fixtures, so a project that crosses from roof to kitchen or bath stays with one accountable contractor. That breadth lets us give you a straight recommendation on your GAF roof instead of steering you toward whatever a single-manufacturer program pays us to sell.
FAQs – GAF Construction Service in San Francisco
No. GAF coverage depends on the full system and proper installation – correct underlayment, accessory components, ventilation, and documented workmanship – not on the shingles alone. We install complete GAF systems and hand you the manufacturer paperwork, and our own 730-Day Done Right Promise covers our work regardless. Call (866) 320-2646 if you’re unsure what your current roof qualifies for.
It comes down to slope, existing decking, and venting. Steep-slope roofs usually get Timberline HDZ or UHDZ, while flat-roofed additions and rear extensions call for Liberty modified bitumen or EverGuard TPO. We assess the roof in person and recommend the system that fits – estimates are free. Call (866) 320-2646.
Not always, but it’s a signal worth acting on. Light granule shedding is normal wear; steady accumulation plus visible bare patches means the asphalt mat is exposed and failing. On a young roof we repair; on a 20-year-old Timberline roof with widespread loss, replacement is usually the honest call. Call (866) 320-2646 for an inspection.
High nails and overdriven fasteners that don’t fully engage the nailing strip are the leading cause. The shingles look sound until wind gets under a course and peels it back, exposing fasteners sitting proud of the strip. Correct fastener placement at install is what prevents it, and we correct it on repair. Call (866) 320-2646.
Sometimes, but it depends on deck condition and local code limits on layers. We probe decking first; if sheathing is soft from trapped moisture, a tear-off is the only defensible option. The estimate tells you which. Call (866) 320-2646 and we’ll scope it before you commit.
Roof repair runs $470 – $2,125 and a full GAF roof replacement typically lands between $9,440 and $23,600, depending on roof size, slope complexity, decking, and venting corrections. Gutters and accessories are quoted with the roof scope. Call (866) 320-2646 for an exact written quote – estimates are free, and pricing is upfront with no change orders.
| Service | Typical San Francisco Range |
|---|---|
| Roof Repair | $470 – $2,125 |
| Roof Replacement | $9,440 – $23,600 |
| Gutters & Accessories | Quoted with roof scope |
Book Your GAF Service in San Francisco, CA
Granules in the gutter or a damp ceiling stain after winter rain is enough reason to get eyes on your GAF roof. Call (866) 320-2646 to schedule your free estimate – a live person answers around the clock. Written line-item pricing, 0% financing for 18 months, and $1,000 off projects over $10,000. Every job is backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of San Francisco.