Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Francisco Homeowners Choose ViewLux Construction
Groundwork Construction Co. of San Francisco provides independent service, installation and repair for ViewLux frameless glass shower enclosures and tub-shower systems across the city. What sets our ViewLux work apart is that we treat a glass enclosure as a building problem, not a trim problem: we check plumb, backing and pan slope before we ever talk about panels. San Francisco is not an easy place to hang heavy glass, and the details that get skipped elsewhere show up here fast.
To be clear and honest: Groundwork Construction Co. of San Francisco is an independent ViewLux service provider. We are not affiliated with, authorized by, or acting on behalf of ViewLux or its manufacturer.
Fog, salt air and a lot of very old wall assemblies make San Francisco a different job than most of the Bay Area. Call (866) 320-2646 for a free estimate.
Why Trust Groundwork Construction Co. of San Francisco for Your ViewLux Construction?
Our technicians have up to 12 years of experience, and a good share of that has been spent on frameless glass in some of the most stubborn bathrooms in San Francisco. They know the difference between a ViewLux 3/8 in. hinged panel and a 1/2 in. door on the hinge side, and why that difference matters when you’re anchoring into a 1920s Edwardian wall with a brick foundation and a stud bay that’s been added to three times over the last century.
We source OEM-compatible hinges, sweeps, seals and handle hardware matched to the panel series. Generic aftermarket sweeps are the single most common source of repeat leaks we see, because they don’t seat on ViewLux profiles and fail at the corners. Matching parts to the series is what keeps the assembly watertight and warranty-safe.
Every project we handle is covered by our 730-Day Done Right Promise, backed in writing. Pricing is upfront, with no change orders sneaking in after the glass is ordered. If you want to talk through what your enclosure actually needs, a live person answers at (866) 320-2646, 24/7.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ViewLux Construction Problems We Fix in San Francisco
Most ViewLux calls we take in San Francisco trace back to how the enclosure was hung, not to the glass itself. These are the failures we see most often:
- Hinge-plate screws pulling out of tile or drywall. The enclosure was hung on substrate that was never blocked for the panel weight. A 1/2 in. frameless door is heavy, and when there’s no solid backing, the screws work loose and the door drops. We add backing and re-hang with the correct hinge hardware.
- Water escaping under the curb. This is a shower pan that wasn’t sloped to the drain before the glass went in. No seal or sweep will fix poor slope. We correct the pan before we reinstall the panels.
- Factory sealant coating breaking down on low-iron clear glass. ViewLux’s Starphire-style clear panels carry a factory coating that sheds water. In San Francisco’s damp, marine air and with the city’s harder water, that coating wears off and hard-water etching sets in. It looks like soap scum but won’t buff out.
- Out-of-plumb walls making a standard panel sit crooked. Very common in pre-1906 and post-1906 rebuild stock, where walls have had a century to settle. The result is a door that swings open on its own or drags on the bottom sweep.
- Sliding bypass doors that jump track. ViewLux tub-shower bypass systems wear at the rollers and the bottom guide. On older San Francisco buildings the header isn’t always level, which shortens roller life and makes the doors grind.
A typical call starts with a frameless ViewLux enclosure that leaks at one corner and has a door that swings open on its own. The usual cause is a panel hung on unblocked substrate or a curb that was never sloped, so no amount of caulk fixes it. A qualified local pro pulls the glass, checks plumb and blocking, corrects the pan slope or adds backing, then re-hangs the panels with the correct hinge hardware and new seals.
ViewLux Parts & Our Repair-vs-Replace Approach
ViewLux hinges, sweeps, seals and handle hardware should be matched to the panel series. Generic aftermarket parts often don’t seat properly on ViewLux profiles, which is why a cheap sweep replacement usually leaks again at the corners within a season. We source parts for each job based on the specific model and series, and we don’t pretend to carry local stock of anything.
Our repair-or-replace call is honest. When a panel is chipped at a hinge bore or the factory coating is gone, replacing the glass is usually the right answer, because no repair brings back a compromised edge or a dead coating. When the door merely drags or leaks, it’s almost always a hardware and re-hang job, and that’s a fraction of the cost of new glass. We tell you which one you’re looking at before any work starts, with the number you see being the number you pay.
Not sure which side of that line you’re on? Call (866) 320-2646 for a free estimate.
Our ViewLux Service Process – Step by Step
- 1
Diagnosis. We check the panel for plumb, verify blocking behind each hinge plate, and test the pan slope. That’s where the real cause lives in most San Francisco enclosures.
- 2
Repair or install. We correct pan slope or add solid backing first, then re-hang the ViewLux panels with series-matched hinge hardware and new seals. For new installs, we block and slope before any glass is ordered.
- 3
Test. We run water and cycle the door through its full swing to confirm it moves smoothly, latches true and doesn’t leak at the curb or corners.
- 4
Warranty. Every job carries our 730-Day Done Right Promise. If something isn’t right, we come back and make it right, in writing.
See the difference
Before
After
Before
After
Before
AfterViewLux Products We Service & Install in San Francisco
We work with the full ViewLux glass lineup you’ll find in San Francisco homes:
- Frameless hinged shower enclosures in 3/8 in. and 1/2 in. tempered glass
- Sliding bypass tub-shower glass doors
- Pivot and neo-angle corner shower enclosures
- Low-iron Starphire-style clear glass panels with factory sealant coating
Whether you’re re-hanging an existing enclosure, installing a new walk-in or converting a tub to a ViewLux shower, we scope the panels, hardware and waterproofing together. Installations and conversions are planned work, so we schedule them properly rather than rushing them.
We Also Service These Brands
Groundwork Construction Co. of San Francisco isn’t a single-brand shop. We also work with KraftMaid cabinetry, Cambria and Silestone quartz and stone surfaces, and Kohler fixtures, so a bathroom or kitchen project can run through one contractor from foundation to finish line. That matters in San Francisco, where coordinating trades across a tight row-house job is half the battle.
FAQs – ViewLux Construction Service in San Francisco
Yes, in many cases a ViewLux enclosure can go over sound existing tile, as long as the substrate can take the panel weight and the walls are plumb enough for a standard panel. What usually can’t be skipped is the blocking and the pan slope. Call (866) 320-2646 for a free estimate.
Almost always an out-of-plumb wall or loose hinge plates pulling from unblocked substrate. The door loses its true swing, so it drifts open or catches the sweep. It’s a hardware and re-hang fix, not a new-glass job. Call (866) 320-2646 for a free estimate.
It’s worth keeping and worth protecting, but once it breaks down from hard water and damp air, it can’t be restored; the etched glass stays etched. The practical answer is maintenance: proper cleaning and a protective routine from day one. If the coating is already gone, replacing the panel is often the only way to get the clarity back. Call (866) 320-2646 for a free estimate.
Check the pan slope, the blocking behind the new glass walls, and waterproofing before any glass is ordered. Get those right and the ViewLux install goes clean; skip them and the enclosure will leak or sit crooked. Call (866) 320-2646 for a free estimate.
Not through us. Groundwork Construction Co. of San Francisco is an independent service provider, not affiliated with or authorized by ViewLux, so any manufacturer warranty runs separately and depends on ViewLux’s own terms. What we back is our work, under our 730-Day Done Right Promise. Call (866) 320-2646 for a free estimate.
Most ViewLux work falls into these ranges, and we quote line by line before work starts:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $5,310 – $14,160 |
| Tub-to-Shower Conversion | $4,130 – $11,800 |
| Shower Replacement | $3,540 – $10,030 |
| Bathroom Remodel | $10,620 – $33,040 |
| Small Bathroom Remodel | $5,900 – $14,160 |
| Bathroom Vanity Installation | $945 – $3,540 |
Rates in San Francisco run higher than most of the Bay Area because of dense lots, older assemblies and careful waterproofing work. Call (866) 320-2646 for an exact quote – estimates are free.
Book Your ViewLux Service in San Francisco, CA
Whether your ViewLux enclosure leaks, drags or needs a fresh install, Groundwork Construction Co. of San Francisco is ready to look at it. Call (866) 320-2646 for a free estimate. A live person answers, 24/7. Every job is backed by our 730-Day Done Right Promise and upfront pricing you can count on.
Written by the team at Groundwork Construction Co. of San Francisco.