Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFrameless Glass Shower Enclosures in San Francisco, CA
Frameless glass shower enclosures use 3/8-inch or 1/2-inch tempered glass held by minimal metal clips and hinges, with no bulky frame around the panels. In San Francisco, a standard alcove enclosure with one fixed panel and one door typically runs $2,400 to $4,800 installed, while a custom neo-angle or curved enclosure for an irregular Victorian bathroom can reach $6,500 to $9,000. Homeowners choose frameless when they want the tile work to be the star, when a framed unit has started leaking or clouding, or when a small Inner Sunset or Richmond District bathroom needs the visual space that glass without a frame provides.
Groundwork Construction Co. of San Francisco installs these enclosures as part of a full bathroom build or as a standalone upgrade. Because we handle the tile, waterproofing, plumbing rough-in, and glass as one scope, there’s no finger-pointing between trades when a measurement is off or a wall isn’t plumb. Our technicians have up to 12 years of experience, and every project is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. Call (866) 320-2646 and a live person answers, day or night.
This work sits inside our larger Bathroom Remodeling in San Francisco practice. If you’re planning a full gut renovation, start there. If glass is the one piece you’re replacing, you’re in the right place.
Key Takeaways
- Frameless glass in San Francisco typically costs $2,400 to $4,800 for a standard enclosure and $6,500 to $9,000 for custom shapes.
- Older San Francisco homes often have out-of-plumb walls and non-standard openings, which is why templated glass from a big-box store rarely fits cleanly.
- Every enclosure we install is measured on site after tile is set, not before.
- All work is covered by the 730-Day Done Right Promise, with upfront pricing and 0% financing for 18 months available.
When You Need Frameless Glass Shower Enclosures
Most San Francisco homeowners call us about glass for one of these reasons. If any of them sound familiar, it’s worth a conversation.
- The old framed unit is leaking or growing mildew. In the fog belt neighborhoods like the Sunset and Richmond, humidity hangs around longer than it does inland. Framed enclosures trap moisture in the channels, and after a decade the caulk fails and water gets behind the tile. A frameless unit with a proper sill and sealed hinges removes the places water collects.
- You’re remodeling the bathroom and the tile deserves better. If you’re spending real money on a Cambria-topped vanity or large-format porcelain walls, wrapping it in an aluminum frame undercuts the whole look. Frameless glass lets the tile run uninterrupted.
- The shower is small and feels tighter than it is. A lot of San Francisco bathrooms are 5 by 7 feet or smaller. Frameless glass adds perceived depth because there’s no frame line breaking up the sight line. In a Noe Valley or Bernal Heights hall bath, that difference is noticeable.
- The opening is irregular. Victorian and Edwardian homes rarely have square, plumb shower openings. Sloped ceilings, out-of-square walls, and soffits are common. A custom-templated frameless enclosure handles those curves and angles; a stock unit does not.
- You want easier cleaning. Frameless glass has fewer seams and channels to scrub. A squeegee after each shower and a monthly pass with a glass cleaner keeps it clear. That’s a real quality-of-life gain over scrubbing grime out of a track.
- The glass itself is damaged. Chips, scratches, or a cracked panel mean the enclosure has to come out. We’ve replaced plenty of panels where the frame was fine but the glass was a hazard.
Our Frameless Glass Shower Enclosures Process
Here’s how a frameless glass project runs from first call to final walkthrough. Glass is the last thing installed because everything else has to be finished first – which is exactly why we sequence it carefully.
- On-site consultation and measurement. We look at the shower footprint, the wall substrate, the drain location, and the door swing. We talk through glass thickness (3/8-inch versus 1/2-inch), hardware finish, and whether you want a hinged door, a sliding system, or a fixed panel with an open walk-in. You get upfront pricing on the spot, no surprises later.
- Scope and material selection. If the glass is part of a larger remodel, we coordinate it with the tile, waterproofing, and plumbing. We work with trusted brand partners across the trades – James Hardie for backer and substrate where it applies, KraftMaid or Wellborn for vanity cabinetry when the project includes one – so the whole bathroom reads as one design.
- Rough-in and waterproofing. This is the invisible work that determines whether the enclosure lasts. We confirm the shower pan is level and sloped correctly, the curb height suits a frameless door, and the waterproofing membrane is intact. Skipping this step is how frameless glass ends up leaking at the bottom seal.
- Tile and cure time. Tile goes in, then we wait for thinset and grout to cure before we template. Measuring over fresh tile is one of the most common causes of glass that doesn’t fit. We don’t rush it.
- Final templating and fabrication. Once tile is set and cured, we take exact measurements – often with a digital template – and send them to the fabricator. Custom glass in San Francisco typically takes 2 to 4 weeks to come back. Glass is tempered, so it can’t be cut or adjusted on site. It has to be right the first time.
- Installation and walkthrough. We set the panels, hang the door, seal the joints, and test the door swing and alignment. Then we walk you through care and cleaning. If anything isn’t right, the 730-Day Done Right Promise covers it.
Frameless Glass Shower Enclosures Pricing in San Francisco
Frameless glass pricing in San Francisco runs higher than most of the country, and there are real reasons for it. Custom fabrication, the cost of templating irregular openings, and the labor to install heavy 1/2-inch panels all add up. Here’s an honest look at the ranges.
| Type of Enclosure | Typical Installed Range | Notes |
|---|---|---|
| Single fixed panel (walk-in, no door) | $1,400 – $2,600 | Best for curbless or open showers; fewest moving parts |
| Standard alcove, one door + one panel | $2,400 – $4,800 | Most common setup; 3/8-inch or 1/2-inch glass |
| Neo-angle or corner enclosure | $3,800 – $6,200 | Two doors or door-plus-panel; common in small baths |
| Custom curved or irregular shape | $6,500 – $9,000 | Victorian and Edwardian openings; fully templated |
| Glass upgrade (low-iron, coatings) | +$300 – $900 | Low-iron clears the green tint; hydrophobic coating helps cleaning |
What moves the number up or down:
- Glass thickness. 1/2-inch glass costs more than 3/8-inch but feels more solid and is standard for doors over a certain width.
- Hardware finish. Chrome is the most economical; brushed nickel, matte black, and brass run higher.
- Opening complexity. A square opening is straightforward. A sloped ceiling, a knee wall, or an out-of-plumb wall means custom templating and more fabrication time.
- Whether it’s part of a remodel. If we’re already doing the tile and waterproofing, the glass integrates into the project and there’s no separate mobilization. Standalone glass replacement carries its own trip and setup.
We quote everything upfront – the number you see is the number you pay. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available on approved credit. Call (866) 320-2646 for a free estimate and design consult.
What Makes Frameless Glass Different From a Framed Unit
A framed enclosure uses metal channels on all four sides of each panel, and those channels are where water and soap scum collect. Frameless glass uses structural hinges and clips, so the glass itself carries the load. That means the glass has to be thicker – 3/8-inch minimum, 1/2-inch for doors – and the walls behind it have to be solid enough to anchor into. In a San Francisco bathroom where the wall is old lath and plaster over studs that have shifted, we often add blocking before the glass goes in. That’s the kind of thing you find out on installation day if nobody checked first.
The trade-off is care. Frameless glass shows water spots more readily than frosted or framed glass, so a squeegee habit matters. We’ll walk you through a simple routine at the walkthrough. Most homeowners find the visual gain worth the two minutes a day.
Local Considerations for San Francisco Bathrooms
San Francisco has a few quirks that come up on nearly every glass project we run. Older homes in neighborhoods like the Mission, Haight-Ashbury, and Potrero Hill frequently have shower openings that were never square to begin with – walls out of plumb by half an inch or more, floors that slope toward the drain at an angle. That’s not a defect; it’s just old construction. Custom templating is how we handle it.
Fog and coastal humidity also matter. In the Outer Sunset and Richmond District, ventilation is often limited in older bathrooms, and moisture lingers. We recommend a properly sized exhaust fan and, where it fits the design, a hydrophobic coating on the glass to slow mineral and soap buildup. Permits for a full bathroom remodel in San Francisco run through the Department of Building Inspection, and glass-only replacements generally don’t require one – but we’ll tell you clearly which side of that line your project falls on. When plumbing or wall layout changes are involved, that’s a different conversation, and we handle the permit scope as part of the work.
If your project is part of a bigger bathroom overhaul, our Bathroom Remodeling team handles the full picture. If you’re also touching other parts of the home, we can connect the dots with our home services overview.
Why Groundwork Construction Co. of San Francisco
We’ve been in business since 2014 and we’ve built our reputation on showing up, doing the work correctly, and standing behind it in writing. Calls are answered by a live person 24 hours a day, 7 days a week – no voicemail, no waiting until Monday. Our technicians are background-checked and arrive in uniform. And every project carries the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction.
We use trusted brand partners across every trade, from KraftMaid and Wellborn cabinetry to Cambria countertops to James Hardie exterior products, so you’re choosing quality rather than whatever’s in stock. Upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000 make a meaningful remodel financially workable without hidden surprises.
If you want the full-scope story, our related pages cover kitchen remodeling in San Francisco and how we handle home additions and ADUs in San Francisco when the shower is part of a larger build.
FAQs – Frameless Glass Shower Enclosures
How much does a frameless glass shower enclosure cost in San Francisco?
A standard alcove frameless enclosure with one door and one panel typically costs $2,400 to $4,800 installed in San Francisco, while custom neo-angle or curved units range from $3,800 to $9,000 depending on shape and glass thickness. Call (866) 320-2646 for an exact quote – estimates are free.
Can you install a frameless enclosure if my bathroom walls aren’t square?
Yes, and this is common in older San Francisco homes. We template the opening after tile is set and have the glass custom-fabricated to match the actual angles and slopes, rather than forcing a stock unit into an irregular space. Call (866) 320-2646 and we’ll take a look.
How long does it take from order to installation?
Custom frameless glass typically takes 2 to 4 weeks from final measurement to install, because tempered glass has to be fabricated to exact dimensions and can’t be cut on site. We schedule templating only after tile and grout have cured. Call (866) 320-2646 to get on the calendar.
Is it cheaper to repair or replace a frameless enclosure?
Replacing a single damaged panel or a hinge is usually cheaper than a full new enclosure, but if the glass is chipped or the frame has failed, a full replacement is the safer path. We’ll tell you honestly which makes sense for your unit. Call (866) 320-2646 for a free assessment.
Other Services We Offer in San Francisco
A frameless shower is often the finishing touch on a broader project. We handle roofing in San Francisco, windows and doors in San Francisco, fence installation in San Francisco, and driveway and paver work in San Francisco. Homeowners in nearby areas can reach us through our bathroom remodeling in Daly City, bathroom remodeling in Oakland, and bathroom remodeling in Berkeley pages. If you’re researching how a larger renovation comes together, our bathroom remodeling in San Mateo and bathroom remodeling in San Jose guides walk through the process.
Get Your Free Estimate
If you’re ready to replace a tired framed unit or finish off a bathroom remodel with frameless glass, we’d like to hear about it. Call (866) 320-2646 for a free estimate and design consult. A live person answers around the clock, and we’ll give you a clear, upfront price before any work begins.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco.