Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Pacifica, CA
We provide independent CGI cabinet, countertop and finish work across Pacifica, CA – and the one thing that makes our CGI work here different is that we spec moisture-rated cores, corrosion-rated hardware and coastal-grade sealants as the default, not the upgrade, because Pacifica’s salt-air belt eats standard cabinet hardware alive. We’re an independent installer and remodeler working with CGI products, not a manufacturer-authorized dealer, so specs get chosen for your home and your hillside lot instead of for a dealer program. From cabinet installation and refacing to quartz and granite tops and full kitchen remodeling, we handle the whole scope under one roof. Call (866) 320-2646 to schedule your free estimate.
Why Pacifica Residents Choose Us for CGI Service
CGI’s Euro-style frameless boxes and all-plywood cabinet lines are good products. The failures we see in Pacifica are almost never the boxes themselves – they’re the hinge and slide choices, the core materials in wet zones, and the sealant detailing around them. We know these cabinet systems well enough to tell you within a few minutes of looking at a door whether you’re facing a hardware swap or a cabinet replacement.
Our technicians have up to 12 years of experience with frameless cabinetry, cabinet refacing and countertop installation. We source OEM-compatible hardware and moisture-rated panels sized to each job rather than pulling from local stock – parts get ordered to spec, which is the right call on the coast where “in stock” usually means “not rated for this.” Calls are answered by a live person 24/7, and every project carries our 730-Day Done Right Promise. If the work isn’t right, we make it right.
That’s the short version of why Pacifica homeowners call us for CGI service. The longer version is in the sections below.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Pacifica
Five failure modes come up again and again in Pacifica kitchens, and each one traces back to something specific about this coast.
- Hinges and slides seizing or rust-streaking. Frameless CGI boxes installed with basic, non-corrosion-rated hardware don’t last long in the salt-air belt. Within a few seasons the sink-base and island doors start bleeding rust streaks down the front and the soft-close action gets gritty. We swap in corrosion-rated hinges and slides rated for damp coastal service.
- Swollen, delaminating sink and dishwasher cabinets. Particleboard and MDF core panels in sink bases and dishwasher-adjacent cabinets soak up fog-belt humidity and any slow drip that’s been running behind the cabinet for months. The core swells, the panel edges mushroom, and the door stops sitting flush. Moisture-rated replacements are the fix.
- Failed edge-banding and toe-kick seals on west-facing walls. Wind-driven rain off the Pacific finds every gap. Factory edge-banding and toe-kick seals give out on west-facing runs, letting water wick into cabinet backs where they sit against T1-11 siding and cantilevered floor decks.
- Uneven countertop seams and cracked sink cutouts on hillside floors. Quartz and granite tops set on CGI base runs over sloped, hillside floors develop uneven seams and stress cracks at the sink cutout when the cabinets are shimmed but not properly leveled and fastened to the subfloor. Leveling is a structural step, not a cosmetic one.
- Deferred decay behind the cabinets. In Pacifica’s mid-century ranches, a failing cabinet is often the first sign of a wall problem behind it. We pull the affected run, check for rot and wicking, and rebuild from dry material rather than covering up a wet wall.
CGI Service in Pacifica: What Local Conditions Mean for Your Equipment
Here’s the local reality that shapes every CGI kitchen we touch in Pacifica: coastal development permits and geotechnical review reach into projects that start as kitchen-only work. Cabinet and island footprints change structural loads, and on bluff-edge and sloped lots – think the hillside streets above Rockaway and the bluff lots along Esplanade – where winter storm runoff has already moved soil, that footprint change can trigger review before a single cabinet gets ordered. A deck footing that looks fine in August can be undermined by February runoff. So in Pacifica, a CGI kitchen scope often needs coastal-erosion and footing documentation handled first. That’s not a paperwork delay. It’s the difference between a kitchen that’s still square in ten years and one that isn’t. If your home sits on a cantilevered or pier-supported floor, we confirm the subfloor and footings before the new island load goes down.
CGI Models & Products We Service in Pacifica
We work on CGI Euro-style frameless cabinetry in both full-overlay slab and shaker fronts, CGI all-plywood box cabinets with soft-close hardware, CGI quartz and granite countertop programs, and CGI cabinet refacing lines with door-and-drawer front replacement. On hardware we typically use OEM or quality aftermarket hinges, slides and levelers rated for damp coastal service – the box and door fronts are usually sound where the real failure is hardware, sealant or water intrusion. Parts are sourced per job to match the model line and the coastal rating requirement. We don’t claim local stock; we order what the job actually needs.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Pacifica
Upfront pricing means the number you see is the number you pay. Here are the ranges Pacifica homeowners should expect:
| Project | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Cost is driven by cabinet count and box type, whether the run sits on a level or sloped floor, how much wall repair is needed behind the cabinets, and the countertop material. A free estimate includes on-site measurement, a written line-item quote, and a clear scope of what’s included. Call (866) 320-2646 for your free estimate – the consult comes with a design conversation at no cost.
Serving Pacifica, CA – Our Local Coverage Area
We serve Pacifica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Pacifica
Sometimes, yes – especially on bluff-edge and sloped lots where the cabinet or island footprint changes structural loads. We assess the scope during your estimate and flag whether coastal-erosion or geotechnical documentation will be needed before ordering. Call (866) 320-2646 to talk through your specific lot.
Fog-belt humidity is enough on its own to swell particleboard and MDF cores over time, and slow supply-line drips behind the cabinet often go unseen for months. We trace the source, replace the swollen base with a moisture-rated cabinet, and reseal the run. Call (866) 320-2646 for an inspection.
Yes, when the carcass is dry and square – refacing or hardware replacement is the honest call. If the sink base or wall-against-siding cabinets have swollen cores, full replacement makes more sense. We tell you which one you’re facing during the estimate.
Confirm the base run is leveled and fastened to the subfloor, not just shimmed, and verify the subfloor and footings on cantilevered or hillside floors. Uneven seams and cracked sink cutouts come from skipping that step. Call (866) 320-2646 for a proper leveling and structural check.
A full kitchen remodel runs $14,000 – $45,000, cabinet installation alone $4,000 – $13,000, and countertop installation $2,000 – $6,500. Exact pricing depends on your walls, floors and cabinet count. Call (866) 320-2646 for a free line-item estimate.
Service Areas Near Pacifica
We serve the Pacifica service area and the surrounding San Mateo coast, including San Bruno, Daly City, San Francisco, Mill Valley and Tiburon. Same salt air, fog belt and coastal-permit realities apply across the region – call to confirm coverage for your address.
Book Your CGI Service in Pacifica Today
CGI cabinet and countertop work in Pacifica needs the right hardware, the right cores and a scope that accounts for the lot. Call (866) 320-2646 for a free estimate and design consult. We answer live 24/7, and every job is covered by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.