Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterChain Link Fence in San Francisco, CA
A chain link fence in San Francisco usually costs between $1,800 and $4,500 for a typical residential lot line, installed, with most single-run backyard jobs landing near the middle of that range. It’s the right call when you need a clean, honest barrier that holds up to salt air, steep grades, and the kind of weather that eats cheaper materials alive. Galvanized or vinyl-coated chain link does that job for decades with almost no fuss, which is why it stays the most requested fence type we install across San Francisco.
We’re Groundwork Construction Co. of San Francisco, and chain link is a fence we take seriously, not a commodity we tack onto a larger job. Our technicians have up to 12 years of experience setting posts on everything from Sunset District clay to the rock-hard fill lots in the Mission. Every install backs the 730-Day Done Right Promise, so if a post shifts, a gate sags, or a tension wire won’t hold, we come back and make it right. Call (866) 320-2646 and a live person answers, day or night, to talk through your property line and what it needs. For the full picture of what we build, see our Fence Installation service.
When You Need Chain Link Fence
Chain link earns its place on a lot of San Francisco properties, and the reasons are almost always practical rather than decorative. Here are the situations we walk into most:
- You need a secure boundary at a rental or multi-unit property. Landlords and property managers in the Richmond and Outer Sunset lean on chain link because it’s durable, low-maintenance, and hard to argue with when you need to define a yard line clearly.
- Fog-belt salt air has chewed through a wood or older metal fence. The marine layer along the Avenues and out toward Ocean Beach is brutal on untreated wood and bare steel. Vinyl-coated galvanized chain link handles that moisture without the annual repainting a wood fence would demand.
- You’re enclosing a dog run or backyard for kids. Chain link gives you full sightlines so you can watch the yard from the kitchen, with heights from 4 to 6 feet that keep pets and small children contained.
- The lot line runs on a steep grade. Twin Peaks, Diamond Heights, and plenty of Bernal Heights lots pitch sharply. Chain link racks cleanly along a slope, so you get a straight, tight fence instead of the stair-stepped gaps a rigid panel fence leaves behind.
- You need to secure a construction site or side-yard storage. Temporary and semi-permanent chain link keeps equipment and materials out of reach during a remodel, and we can set it to convert to a permanent fence later.
- An older fence is failing its purpose and you want a straightforward replacement. If the existing posts are rusted through at the soil line or the mesh is sagging, a fresh chain link run restores the boundary without the cost of an ornamental style.
Our Chain Link Fence Process
Fence work lives or dies on the posts. Get those right and the rest holds for decades; cut corners and you’re back out there in two winters. Here’s how we run a chain link job from first call to final walk:
- On-site measure and property-line check. We walk the run with you, confirm where the boundary actually sits, and flag anything that affects the layout: easements, slope changes, existing utilities, and the mature trees that roots-and-all complicate a post line. No-hassle upfront pricing means you get a written number before we touch a shovel.
- Material selection. You choose between galvanized and vinyl-coated chain link, mesh gauge, post height, and gate style. Vinyl-coated holds color and resists the salt air better along the coast; galvanized costs less and does fine inland. We match the spec to your block, not to a default.
- Post setting. We dig each post hole to depth, set terminal posts in concrete, and brace the corners and end posts properly, since those carry the tension for the whole run. On steep San Francisco grades we rack the posts to follow the slope so the top rail stays true.
- Framework and mesh. Top rail, tension wire, and mesh go up tight, with tension bars at every terminal. This is where a fence either looks crisp or starts to sag within a season. We pull it drum-tight.
- Gates and hardware. We hang walk gates and drive gates so they swing freely, latch cleanly, and clear the ground on uneven pavement, which is most San Francisco sidewalks and driveways.
- Final walkthrough and cleanup. We haul off spoils and old fencing, walk the finished run with you, and hand over the workmanship guarantee in writing. Most single-run jobs are completed in a single visit.
Every technician who shows up is background-checked and in uniform, so you know who’s on your property. If a chain link fence is part of a larger exterior project, our team can scope the grading and drainage around it alongside the fence line. Learn more about our full home services and how the trades fit together.
Chain Link Fence Pricing in San Francisco
Chain link fence installation in San Francisco typically runs $25 to $45 per linear foot installed, and a complete residential job usually lands between $1,800 and $4,500 depending on length, height, material, and how hard the ground is. Here’s a line-item look so you can budget with real numbers instead of a vague ballpark.
| Item | Typical Range | What Drives It |
|---|---|---|
| Galvanized chain link, 4 ft, installed | $25 – $33 per linear foot | Standard residential height, straightforward ground |
| Galvanized chain link, 6 ft, installed | $30 – $40 per linear foot | Taller security run, heavier posts |
| Vinyl-coated chain link, installed | $32 – $45 per linear foot | Color hold and salt-air resistance along the coast |
| Walk gate (3 – 4 ft) | $350 – $650 each | Frame gauge, latch, self-closing hardware |
| Drive gate (10 – 12 ft) | $900 – $2,000 each | Width, swing vs. slide, operator-ready frame |
| Removal of old fencing | $200 – $600 | Length, concrete footings, disposal |
| Steep-grade or rocky-ground labor | $5 – $12 per linear foot added | Slope racking, hard-dig conditions |
A few things move the number more than people expect. Height is the biggest lever, since a 6-foot run needs stouter posts and more concrete than a 4-foot one. Material matters, and vinyl-coated galvanized is worth the upcharge on properties close to the ocean, where bare galvanized oxidizes faster. Slope is the wild card in San Francisco: a flat Noe Valley yard installs quicker than a terraced Bernal Heights lot, and hard-dig ground or hidden concrete from an old fence adds labor. Gates cost what they cost because hardware and framing carry real tension.
We keep pricing transparent: the number you see is the number you pay, with no surprise add-ons after the crew shows up. Larger fence and exterior projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months spreads the rest across a year and a half. Your project estimate and design consult are free. Call (866) 320-2646 for an exact quote on your San Francisco run.
Is it cheaper to repair or replace a chain link fence in San Francisco?
Repair is cheaper when the posts are sound and only the mesh, tension wire, or a single gate is damaged, often running a few hundred dollars, while replacement makes more sense once two or more posts are rusted through at the soil line or the frame itself is bent. In salt-air neighborhoods near the beach, post rust at the ground is the deciding factor: a fence with good posts and tired mesh is a repair, but a fence with rotting posts will never hold tension no matter how much mesh you replace. We’ll tell you straight which one your fence needs during the free estimate. Call (866) 320-2646 and we’ll book it.
How much does a chain link fence cost in San Francisco?
Most residential chain link fences in San Francisco cost between $1,800 and $4,500 installed, or roughly $25 to $45 per linear foot, with the range set by height, material, gate count, and whether the lot runs on a slope. A short flat backyard run with one gate lands near the low end; a long 6-foot boundary with a drive gate and old-fence removal pushes toward the top. Estimates are free and the pricing is upfront, so the written number is the one you pay.
Can you install a chain link fence the same day?
Many single-run chain link jobs are completed in a single visit, and straightforward residential installs can often be scheduled within days of the estimate. Longer runs, multiple gates, or steep-grade lots that need extra grading usually take a bit more time, and we tell you the realistic window up front instead of promising a date the ground won’t allow. A live person answers our line around the clock, so call (866) 320-2646 anytime to check availability for your block.
Does chain link hold up to San Francisco weather?
Yes, and it’s one of the better choices for the city’s marine climate, especially in vinyl-coated galvanized form, which resists the fog-belt moisture that destroys untreated wood fencing. Bare galvanized steel does fine inland but oxidizes faster within a mile or two of the ocean, so along the Avenues and out by Ocean Beach we usually steer toward the coated product. Set on properly concreted posts, a coated chain link fence handles the salt air and wet winters without the yearly maintenance a wood fence demands.
Do I need a permit for a chain link fence in San Francisco?
San Francisco generally allows residential fences up to 6 feet in the rear and side yards without a building permit, but front-yard height limits, corner-lot sightline rules, and any fence over 6 feet can require review, so it’s worth confirming before the posts go in. Historic districts and some hillside lots carry extra rules about where a fence can sit on a slope. We help you sort out what applies to your property during the walk-through so nothing stops the job mid-install.
If a chain link fence is on your list, whether it’s a backyard dog run in the Inner Sunset, a clean boundary for a rental in the Richmond, or a full perimeter replacement on a steep Bernal Heights lot, we’d like to quote it. Our technicians have up to 12 years of experience, every install is backed by the 730-Day Done Right Promise, and the estimate is free. Call (866) 320-2646 today and a live person will pick up, day or night.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco.