Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in San Francisco, CA
We install and repair Belgard hardscape systems across San Francisco, and the one thing that shapes every project here is the ground itself: steep lots, hillside sub-bases, and a fog belt that never lets joint sand dry out. We’re an independent installer, not authorized or endorsed by Belgard, but we work with Mega-Arbel, Catalina, Weston Stone, and Hollandstone systems every week. If your pavers have heaved, your wall has settled, or your driveway is rocking at the joints, call (866) 320-2646 for a free estimate.
Why San Francisco Residents Choose Us for Belgard Service
We know how Belgard products behave in the field, not on a showroom floor. Mega-Arbel slabs on a flat inland lot and Mega-Arbel slabs on a graded hillside yard in San Francisco are two different jobs, and the difference lives almost entirely in the base and the drainage. That’s the part that gets skipped.
We’re a licensed and insured contractor, and every Belgard install and repair is covered by our 730-Day Done Right Promise. If it shifts, settles, or drains wrong, we make it right. We spec genuine Belgard pavers and wall block for anything visible or structural, and we source stainless edge restraints and galvanized flashing because standard hardware doesn’t survive here. Pricing is upfront and written line-item, so the number you see is the number you pay.
We are not affiliated with, sponsored by, or authorized by Belgard. We’re an independent Belgard service provider, and we build every job to hold up on San Francisco grade and in San Francisco weather.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Solve in San Francisco
- Efflorescence and salt staining on fog-belt pavers. White chalky bloom is a moisture problem, not a surface problem. On west-side lots where fog sits and joint sand stays damp, moisture migrates through the paver and pushes mineral salts to the face. Cleaning the surface fixes it for a month. Fixing the drainage fixes it for years.
- Base and joint-sand failure on hillside patios and driveways. Pavers heave, shift, and rock when the sub-base depth and slope fall were under-built for San Francisco’s grade. The pavers are rarely the problem – the aggregate base beneath them is.
- Spalling, fade, and rust bleed on light Catalina-style slabs. Standing water and salt-laden air dull light-toned slabs fast, and standard non-stainless edge restraints rust and bleed orange stains into the paver face within a couple of seasons.
- Retaining wall block movement on terraced slopes. Anchor Highland Stone and Weston Stone walls settle and lean where geogrid, drainage gravel, and footing depth were skimped. A wall on a San Francisco slope is a structural system, not a stack of blocks.
- Polymeric sand and mortared joint erosion after winter rain. Sloped surfaces shed heavy rain fast, and under-specified joint sand washes out along with it. Re-sanding without correcting the fall just resets the clock.
Belgard Service in San Francisco: What Local Conditions Mean for Your Equipment
San Francisco’s west-side fog belt and Pacific salt air change the hardware spec on even small residential hardscape jobs. Standard edge restraints and fasteners corrode here in a fraction of their normal lifespan, and light Belgard pavers stain from salt-driven moisture faster than they do anywhere inland. So we routinely specify stainless edge restraints and galvanized flashing, which is a requirement that almost never comes up in drier Bay Area cities like San Jose or Walnut Creek.
The same fog that stains your pavers also hides the real failure. Moisture trapped in joint sand on a Sunset District or Richmond District yard never fully dries, so a base that’s slightly under-drained stays wet year-round and quietly loses compaction. By the time the pavers rock visibly, the damage is two or three seasons old. On sloping ground in San Francisco, drainage design has to come first – before the pavers, before the sand, before anything looks finished.
The west-side grade compounds it. A patio cut into a terraced yard needs a base with a real fall to daylight, and a wall holding that terrace needs geogrid and gravel behind it. Get either wrong and the fog finds the weak point.
Belgard Models & Products We Service in San Francisco
We work with Mega-Arbel and Arbel slab pavers, Catalina Grana and Catalina Slate, Weston Stone and Anchor Highland Stone retaining wall systems, and Urbana and Hollandstone (Old World) concrete pavers. We don’t claim to stock any of these locally – genuine Belgard material is sourced per job from authorized suppliers once the design and quantities are set, so you’re getting the right paver and block for your grade and drainage plan rather than whatever happens to be on a shelf.
For visible and structural work we use genuine Belgard material. Where a base or joint failure is localized, re-laying and re-sanding that section is honest and cheaper than a full tear-out. A failed hillside sub-base or an under-built retaining wall gets rebuilt, not patched.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in San Francisco
Cost tracks three things: square footage, how much grading and drainage correction the lot needs, and whether the work is new install or a rebuild. Hillside access and tight lots in San Francisco add labor, and stainless hardware adds a little material cost. Every free estimate includes a written line-item quote with a base and drainage scope, so you know what’s being built and why.
| Service | Price Range |
|---|---|
| Paver Patio Installation | $4,130 – $12,980 |
| Paver Driveway Installation | $8,260 – $21,240 |
| Driveway Replacement | $5,900 – $16,520 |
| Driveway Sealing | $295 – $825 |
Call (866) 320-2646 for an exact quote on your San Francisco project. Estimates are free, and we answer live 24/7.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in San Francisco
Yes, provided the base, drainage, and edge restraints are specified for the climate. Belgard pavers themselves are durable; the failure point in fog-belt yards is trapped moisture and standard hardware that corrodes. Stainless restraints and a properly drained base are what make the difference.
That white bloom is efflorescence, and it means moisture is moving through the paver and leaving mineral salts on the face. In San Francisco it’s usually tied to joint sand that never dries and drainage that doesn’t shed water. Call (866) 320-2646 for an assessment of the cause, not just the surface.
Yes, with a base and drainage detail built for the grade. Steep lots need proper base depth, a real fall to daylight, and often a terraced retaining wall with geogrid and drainage gravel. We scope that into the quote rather than discovering it mid-job.
Paver driveway installation runs $8,260 – $21,240 here, and driveway replacement runs $5,900 – $16,520. Grade, access, and drainage correction drive the spread. Call (866) 320-2646 for an exact quote – estimates are free.
Usually yes, and often with a breathable sealer that lets moisture escape rather than trapping it. Fresh sealer buys you resistance against salt staining and fog-driven moisture, but sealing over a failing base just seals the problem in. Driveway sealing itself runs $295 – $825; call (866) 320-2646 to schedule a free estimate.
Service Areas Near San Francisco
We handle Belgard installs and repairs throughout San Francisco and the surrounding area, including San Francisco service area neighborhoods like the Sunset and Richmond Districts, plus Daly City, Tiburon, Tamalpais-Homestead Valley, and Mill Valley in Marin.
Book Your Belgard Service in San Francisco Today
Heaved pavers, a settling wall, a driveway that rocks at the joints – none of it fixes itself. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate. Live person, 24/7. Upfront pricing, backed in writing.
Written by the team at Groundwork Construction Co. of San Francisco.