Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The San Francisco Owner’s Guide
We install KraftMaid-compatible kitchen remodeling and cabinet replacement in San Francisco, and full kitchen projects here typically run $16,520 to $53,100 installed, with cabinet-only work landing between $4,720 and $15,340 depending on the door style and box count. KraftMaid doesn’t sell parts directly to homeowners, so when a cabinet fails the owner is usually stuck trying to match a discontinued door or box from a third party. Most San Francisco owners discover the problem the same way: a drawer that stops closing flush, a door that starts sagging at the hinge, or a shelf that gives way under the weight of everyday dishes.
KraftMaid built its reputation on semi-custom cabinetry with a wide range of door profiles, finishes, and box sizes, which means the “part” isn’t always a single item. It can be a hinge, a glide, a shelf clip, a drawer box, a single replacement door, or a whole run of cabinets when the finish has aged past the point of a spot fix. Knowing which is which is where most of these projects go right or wrong.
Which KraftMaid Models This Applies To
KraftMaid doesn’t organize its line by a single model number the way a water heater does. Its cabinets are sold as a series of product families (door styles, wood and finish options, and box construction types) and every order is configured at the dealer level. That’s the compatibility gotcha: there is no universal KraftMaid hinge or glide that fits every cabinet they’ve ever made. A concealed European-style hinge from one build won’t necessarily align with the hinge bore on a cabinet built in a different year.
To identify what you actually have, start with the label. KraftMaid cabinets usually carry a paper or stamped label inside the door, on the back of a drawer, or on the inside of a side panel. Look for a door style name, a finish code, and a manufacture date. If the label is gone or painted over, the next step is measurement: door width, height, thickness, hinge bore diameter, and hinge cup spacing. Any reputable cabinet supplier can match a replacement door or box from those numbers, but guessing from a photo almost always goes wrong.
On the OEM-versus-aftermarket question for KraftMaid specifically, the honest answer cuts both ways. A genuine KraftMaid replacement door is the surest way to match a finish exactly, but lead times can run weeks and discontinued finishes may not be available at all. A quality aftermarket door in the same profile can work well when the whole run is being replaced together, since a slight finish variation matters less when everything is new. Mixing one aftermarket door into a run of ten original doors is where you’ll see the difference in the light.
The same matching logic applies to kitchens that also need stone work. We install Cambria and Silestone counters alongside KraftMaid cabinetry, and Kohler fixtures for the sink and faucet, so the cabinet replacement and the counter cut-outs are planned together rather than forced together after the fact.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Kitchen Remodeling Is Failing
We’ve pulled enough failed cabinet hardware out of San Francisco kitchens to know the symptoms by heart. Here’s what each one usually means.
- A drawer that won’t close flush or pops back open. Almost always the glide or the drawer box itself. Undermount glides wear at the clip that locks the box to the rail, and once that clip fails the box sags and rubs.
- A door that sags at the top corner and won’t stay aligned. A hinge problem far more often than a door problem. Screws pull out of the cabinet frame in older boxes, and once the frame is stripped the hinge won’t hold no matter how many times it’s tightened.
- Finish peeling, bubbling, or yellowing on the door face. Usually heat or moisture damage near the range or sink, or a finish that’s simply reached the end of its service life. In San Francisco’s coastal air, doors on the sink wall see more humidity than the rest of the kitchen and age faster.
- A shelf that sags or drops under load. Shelf clips fail or the holes wallow out. A heavier aftermarket shelf pin is a cheap fix, but a sagging shelf often signals the box has taken water somewhere along its life.
- A cabinet box that’s separating at the corner or feels loose when you open the door. Joint failure or water damage at the base. This is the one that usually means replacement rather than repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full kitchen remodel in San Francisco typically runs $16,520 to $53,100. Cabinet installation alone lands between $4,720 and $15,340, countertops between $2,360 and $7,670, backsplash between $945 and $2,950, and a kitchen island between $3,540 and $11,800. A small kitchen remodel runs $10,620 to $23,600.
What pushes the number toward the high end: cabinet count and door style, whether the boxes are stock, semi-custom, or fully custom, stone selection, and whether the layout is changing (which pulls in electrical and plumbing). A single replacement door or a set of hinges is a small job. A full run of cabinets with new counters and a backsplash is a remodel, and the two shouldn’t be priced the same way.
We quote upfront pricing, no surprises: the number you see is the number you pay, in writing, with parts and labor itemized. And every install is covered by our 730-Day Done Right Promise (if it’s not done right, we make it right), one of the longest workmanship guarantees in residential construction. If the finish on a new door fails inside of two years, that’s on us.
DIY or Call Us?
Here’s the honest split. An owner can safely tighten a hinge screw, replace a shelf clip, or swap a drawer glide on a standard box if they can match the part exactly and the cabinet frame isn’t stripped. Those are small jobs and there’s no shame in handling them yourself.
Where DIY goes wrong on KraftMaid specifically is the match. A hinge that looks identical in the bag often has a different cup depth or overlay, and a cabinet door that’s a sixteenth of an inch off in the hinge bore will never hang straight no matter how carefully you mount it. A drawer box that’s a quarter inch too wide won’t fit the opening. We’ve also seen owners try to re-face a door with a peel-and-stick veneer on a San Francisco cabinet that’s seen decades of coastal humidity, and watched it bubble within a season. There’s no dangerous high-tension component in kitchen cabinetry, so this isn’t a safety warning. It’s a fit-and-finish warning. If the part needs to be sourced or matched, that’s when you call us.
Call (866) 320-2646 to talk through what failed, and we’ll tell you straight whether it’s a repair or a replacement. A live person answers around the clock.
FAQs
KraftMaid cabinets are built to hold up for decades, but the hardware inside them (hinges, glides, shelf clips) typically wears out first, often within 10 to 15 years of daily use. The box and the door face outlast the moving parts by a wide margin. Call (866) 320-2646 if you’re not sure whether it’s the hardware or the box that’s failed; we’ll help you figure it out.
Yes, often. A failed hinge, glide, shelf clip, or single door can be replaced without touching the rest of the cabinet, and that’s the least expensive path when the box is sound. A separating box joint, water damage at the base, or a finish failure across the whole run usually means replacement makes more sense. Call (866) 320-2646 with a photo and we’ll give you an honest read.
A single door or a set of hinges is a same-visit job, usually under two hours. A full cabinet run replacement typically takes one to three weeks depending on door style lead time and whether countertops or the backsplash are involved. San Francisco permitting and building access (tight stairwells, no freight elevator) can add time, and we factor that into the schedule before we start. Call (866) 320-2646 for a timeline specific to your kitchen.
We identify the door style and finish from the cabinet label or from measurements, then source a genuine KraftMaid replacement where the finish is still available, or a quality aftermarket match where it isn’t. We don’t carry parts on a truck and we don’t stock KraftMaid locally, so every part is matched to your specific cabinet before it’s ordered. Call (866) 320-2646 and we’ll start the match with you.
Ready to price your kitchen? Groundwork Construction Co. of San Francisco installs KraftMaid-compatible cabinetry across San Francisco, from the Sunset to Noe Valley to the Marina, and we’ll give you a free estimate and design consult with upfront pricing from the start. Calls are answered by a live person 24/7, our technicians are background-checked and arrive in uniform, and every project carries our 730-Day Done Right Promise. Current offers include $1,000 off projects over $10,000 and 0% financing for 18 months. Call (866) 320-2646 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.