Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Windows & Doors: The San Francisco Owner’s Guide
We install and replace KraftMaid-compatible windows and doors throughout San Francisco, and a typical window replacement here runs $5,310 to $17,700 installed, with impact-rated units at $9,440 to $29,500. Scheduling starts with a free estimate, not an immediate dispatch, because these are planned installs. Most owners find us the same way: a door that won’t latch square any more, or a window sash that fogs between the panes after a run of wet, salty air off the Pacific. Once that shows up, the part is usually past adjusting.
Which KraftMaid Models This Applies To
KraftMaid builds windows and doors in a handful of series, and the part that fits one won’t fit another. The fastest way to identify yours is the manufacturer label on the door slab edge or the window sash frame – it carries the series, size call-out, and glass package. Measure the rough opening, not just the visible unit; San Francisco’s older housing stock often has out-of-square openings from settling, and a unit matched only to the old sash size will bind.
On the OEM-versus-aftermarket call: for glass units and hardware, an exact KraftMaid replacement keeps the series warranty intact and guarantees fit. For a door slab or a worn threshold, a quality aftermarket equivalent from a verified supplier performs the same and costs less, as long as the dimensions and finish match. We’re an independent service provider, not affiliated with KraftMaid, so we quote the honest option for your unit rather than steering you to one by default.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Windows & Doors Is Failing
- Fogging or condensation between panes. The sealed glass unit has lost its gas fill and the desiccant is saturated. No amount of wiping on the inside fixes it – the glass unit itself needs replacing.
- A door that drags or won’t latch. Usually a shifted hinge, a swollen slab from moisture, or settling in an old San Francisco frame. A dragging door left alone warps the slab and turns a hinge fix into a full replacement.
- Drafts or water staining at the frame. Failed weatherstripping or a compromised seal lets fog-belt damp air in. In this climate that moisture drives rot faster than most owners expect.
- Sticking or hard-to-lift sashes. Worn balances or a track that’s collected grit. Left too long, forcing the sash cracks the frame.
- Rattling glass or a loose pane. A failed glazing bead or seal. This is a wind and water entry point, not just a noise issue.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Upfront pricing, no surprises – the number you see is the number you pay. Window replacement in San Francisco runs $5,310 to $17,700 installed, and impact-rated units run $9,440 to $29,500. The range moves on glass package, unit size, whether the opening needs reframing, and access – a third-floor unit in a narrow Noe Valley stairwell takes more labor than a ground-floor door.
Every quote is line-item: the part, the labor, and any framing or trim work spelled out separately. The install is backed in writing by our 730-Day Done Right Promise – if it’s not done right, we make it right – one of the longest workmanship guarantees in the residential construction space.
DIY or Call Us?
You can safely check three things yourself: read the manufacturer label for your series, measure the rough opening, and note whether the frame is square. That’s diagnosis, not repair. Where DIY goes wrong is swapping a full window or exterior door unit – removing a sealed unit and reflashing an opening in San Francisco’s damp climate is where water intrusion and rot begin, and a mis-sealed opening can cost far more to correct than the original install. Call (866) 320-2646 and we’ll match the part to your unit and quote it straight. Our technicians have up to 12 years of experience, and calls are answered by a live person 24/7.
FAQs
How long do KraftMaid windows and doors last in San Francisco? Expect roughly 15 to 20 years from a quality window and longer from a solid exterior door, though the coastal fog belt shortens seal and finish life compared with drier inland climates. Call (866) 320-2646 for an exact quote – estimates are free.
Can a failing unit be repaired instead of replaced? Often, yes – a single fogged glass unit or a worn hinge can be repaired on its own without replacing the whole window or door. A warped slab or a rotted frame cannot, and we’ll tell you which one you have.
How long does the swap take? A single window or a door slab is typically completed in a single visit; a multi-unit replacement or a reframed opening takes longer and we schedule it upfront. Call (866) 320-2646 to book your free estimate.
How do you source the part? We match your unit by series and rough-opening measurement and source either the exact KraftMaid replacement or a verified aftermarket equivalent, whichever fits your unit and budget honestly. Call (866) 320-2646 to get started.
When a window or door in your San Francisco home stops doing its job, the fix starts with knowing exactly which part you have and what it will cost to replace it right. We serve San Francisco homeowners with upfront pricing, a 730-Day Done Right Promise, and quality brand partners across every trade – from KraftMaid windows and doors to Cambria, Silestone, and Kohler in the rooms beyond. Call (866) 320-2646 for a free estimate, and take $1,000 off projects over $10,000, with 0% financing for 18 months available.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.