A Groundwork company - serving San Francisco, CA

Cambria Driveway & Pavers in San Francisco, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cambria Driveway & Pavers: The San Francisco Owner’s Guide

We install Cambria paver driveways and hardscape in San Francisco, and most residential projects land in the $8,260 to $21,240 range installed, depending on square footage, base prep, and whether the existing slab has to come out. We quote from measurements, not phone guesses, and the number you see is the number you pay.

Call (866) 320-2646

Owners usually find out something is wrong the slow way. A paver sits a quarter inch proud of its neighbors after a rainy week in the Sunset. Efflorescence blooms white on the surface and won’t rinse off. Or a runner of pavers near the curb sinks every spring, and the gutter starts holding water against the garage door. San Francisco’s fog belt and winter rain are hard on a driveway installed over a thin base, which is why we look at subgrade and drainage before we ever talk about the surface.

Key Takeaways

  • Cambria-compatible paver driveways in San Francisco typically run $8,260 to $21,240 installed.
  • Most failures trace back to base depth and drainage, not the paver surface itself.
  • We’re an independent service provider and are not affiliated with Cambria. We install Cambria product as part of a full driveway build.
  • Every job is covered by the 730-Day Done Right Promise.

Which Cambria Models This Applies To

Cambria’s hardscape and paver lines show up in San Francisco on everything from single-family Sunset bungalows to new-build ADU pads in Bernal Heights, and matching the right product to the right exposure matters more than most homeowners expect. The identifying marks sit on the packaging at purchase, on the original project paperwork if a prior contractor installed it, or on the product name stamped into the Cambria spec sheet you’ll want on hand. If you don’t have that, we measure the field and borders and identify the pattern from the joint layout and edge restraint configuration.

Here’s the compatibility gotcha worth knowing: Cambria paver profile dimensions and the clip or edge-restraint system that holds them have to match your existing field, or the repair looks like a patched quilt. That applies to the color and finish too. A different production run of the same named product can read slightly differently under San Francisco’s gray winter light, so a repair that uses a mismatched batch will catch your eye every evening. We check the batch and the profile before we order anything.

On the OEM-versus-aftermarket question for Cambria specifically: there’s no proprietary hardware to chase, so the decision is about profile and finish match, not brand loyalty. A compatible paver from another quality maker will perform if the base and drainage are right. What we won’t do is pretend a low-grade substitute is the same material. Cambria is a premium line, and we treat it that way when we specify a replacement run.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cambria Driveway & Pavers Is Failing

These are the five symptoms we see most often on Cambria installs around San Francisco, and what’s actually causing each one.

  • Pavers settling or heaving after rain. Water is getting under the field and the base wasn’t compacted in lifts. In San Francisco, that typically shows first on the low side of the drive near the sidewalk or garage apron.
  • White efflorescence that keeps returning. Mineral salts are migrating through the paver, and that’s a moisture problem behind the surface. If it keeps coming back after a dry stretch, the base is holding water.
  • Sand washing out of the joints. Joint sand is eroding faster than it should, which points to insufficient edge restraint or runoff channeling across the field. Once joints open, the field starts to shift.
  • Standing water or ponding. The driveway’s slope has drifted from where the original installer set it. A driveway that ponds against the house is a drainage fix, not a surface cosmetic.
  • A sunken band near the curb or door. The base under the apron failed, often from a utility trench that was never recompacted properly. This is the most common repair we quote in San Francisco.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what San Francisco homeowners actually pay, calibrated to this market:

Scope Installed Range
Paver driveway installation (Cambria-compatible) $8,260 – $21,240
Driveway replacement $5,900 – $16,520
Paver patio installation $4,130 – $12,980
Driveway sealing $295 – $825

The range moves with the drivers you’d expect: square footage, depth of base removal, whether the existing slab or pavers have to come out and haul away, drainage corrections, and whether the scope includes a border course. We itemize parts, labor, base prep, and disposal on the written quote, so you can see what each line costs. Base prep is where cheap bids cut corners, and it’s the line we won’t hide. Every install is backed by the 730-Day Done Right Promise.

DIY or Call Us?

Some of the diagnosis is yours to do safely. Walk the field after rain and note where water pools. Check whether joint sand is washing out. See whether a paver rocks underfoot, and check that the drive still slopes away from the garage. All of that is fair game.

The repair usually isn’t. Lifting field pavers, re-compacting base in lifts, resetting edge restraint, and blending a repair into the existing pattern without a visible patch is where most DIY driveway work in San Francisco fails its first wet winter. Pulling up a section without a compaction plan just moves the problem. If the base has failed, that’s the point to call us at (866) 320-2646 for a free estimate. We’ll look at the drainage first and tell you honestly whether you need a spot repair or a full redo.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch