Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Roofing: The San Francisco Owner’s Guide
We replace and repair Moen-spec roofing components and roof terminations in San Francisco, and installed pricing typically runs $470 – $2,125 for repair work and $9,440 – $23,600 for a full roof replacement, depending on access, pitch and material. We can’t promise same-day dispatch on planned roof work, but we do answer the phone around the clock and most smaller repairs are scheduled quickly after a look at your roof. Owners usually find out something’s wrong the same way every time: a ceiling stain after the first real rain, a lifted flashing collar around a vent stack, or granules in the gutter that weren’t there last spring.
Which Moen Models This Applies To
Moen is best known for plumbing, so the first thing to sort out is which Moen product you actually have. The residential Moen line that touches a roof is limited: bath and shower vent termination caps, roof-mounted vent stack covers, and accessory trim that finishes out the penetration where a bath fan exhausts through the roof deck. If you’re standing over a Moen vent cap or roof vent assembly, the model number is stamped on the underside of the cap or on the collar body – pull it off if it’s already loose, or photograph the label before it degrades further. Measure the collar inside diameter and the boot height, because Moen’s vent caps are sized to specific duct diameters (most residential bath exhaust runs 3-inch or 4-inch), and a cap that’s a half-inch off will never seat correctly.
Here’s the gotcha most San Francisco homeowners miss: Moen revisions their vent geometries quietly, so an OEM replacement from a big-box shelf may not match a 10-year-old cap even though the model prefix lines up. An OEM part gets you an exact fit and the original warranty terms. A quality aftermarket equivalent (neoprene collar, stainless clamp) often holds up better in coastal fog and costs less, but only if the dimensions are dead-on. For plumbing fixtures and trim, we also service KraftMaid, Cambria and Silestone lines – different trade, same accountability. Groundwork Construction Co. of San Francisco is an independent service provider and is not affiliated with Moen.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Moen Roofing Is Failing
- Ceiling stain spreading from the vent penetration. The cap or boot seal has failed and water is tracking down the duct chase. In San Francisco this shows up most often on the inland-facing slope after the first fall storm.
- Cracked or UV-brittled cap. Plastic vent caps take relentless sun on south-facing roofs and turn chalky and brittle within about 8-12 years. Once the cap cracks, rain goes straight through.
- Lifted or rusted collar. The metal collar pulls away from the shingles as the roof ages, and coastal salt fog accelerates corrosion on any exposed steel. A rusted collar that’s still “holding” is already on borrowed time.
- Draft or attic moisture complaints. A failed cap lets outside air back in, which shows up as cold drafts near the bath fan or condensation on attic sheathing. That’s a venting problem dressed up as a plumbing problem.
- Visible gaps or daylight around the penetration. Flashing failure at the roof deck – not the cap itself – is the culprit. Left alone, it rots the surrounding sheathing, and that repair climbs fast.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in San Francisco for Moen-compatible vent and roof penetration work:
- Roof repair (vent cap, collar, flashing): $470 – $2,125
- Full roof replacement: $9,440 – $23,600
- Tile roof repair (tile surround at penetrations): $710 – $2,950
The range is driven by roof pitch, roof type, how far the technician has to go to reach the penetration, and whether the deck underneath is sound. A single vent cap swap sits at the low end; anything with rotten sheathing or tile work pushes toward the top. You get upfront pricing before anyone climbs up, a written line-item quote, and no change orders on the agreed scope. All work carries our 730-Day Done Right Promise – if it’s not done right, we make it right.
DIY or Call Us?
What you can safely check yourself: eyeball the cap from a ladder at the eave (no roof walking), photograph the label, note any ceiling stains, and measure the duct collar if the cap is already off. What you should not do is climb onto a pitched San Francisco roof to pry up shingles or reseal flashing – the fall risk is real, and a poorly resealed penetration will leak worse than the one you started with. Water intrusion also hides; by the time you see the stain, the sheathing is often already wet. Call (866) 320-2646 and we’ll tell you honestly whether it’s a five-minute cap swap or a bigger repair. Estimates are free, and a live person in San Francisco picks up 24/7.
FAQs
How long does a Moen roof vent cap last in San Francisco? Most plastic Moen vent caps last roughly 8-12 years before UV and salt fog break them down, and coastal salt fog can shorten that. If yours is past that window and looks chalky, plan on a swap before the rainy season.
Can the part be repaired instead of replaced? Sometimes – a good collar and intact cap can be resealed with fresh flashing and shingle work, which often lands in the $470 – $2,125 range. Once the plastic is cracked or the sheathing is wet, replacement is the honest answer. Call (866) 320-2646 for an exact quote – estimates are free.
How long does the swap take? A clean vent cap replacement is usually a single-visit job, often under an hour once access is set up. Anything involving flashing, sheathing or tile work takes longer, and we’ll tell you the timeline upfront with no surprises.
How do you source the part? We match the exact Moen model number and duct dimensions, then either specify the OEM replacement or a quality aftermarket equivalent that fits the same opening – you see the part and the price in writing before we order. Call (866) 320-2646 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.