A Groundwork company - serving San Francisco, CA

American Standard Bathroom Remodeling in San Francisco, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

American Standard Bathroom Remodeling: The San Francisco Owner’s Guide

Bathroom remodeling in San Francisco typically runs $10,620 to $33,040, and the work is scheduled, not same-day; we plan a start date, pull the permits, and build to your timeline. Most owners start looking after water shows up where it shouldn’t: a stain spreading on the ceiling below, a soft spot near the shower curb, or a toilet seal that keeps giving out. In San Francisco’s older housing stock, those small failures often trace back to decades of moisture working through tile, subfloor and old plumbing.

Call (866) 320-2646

Which American Standard Fittings This Applies To

American Standard has made bathroom fixtures for a very long time, and the parts that fail under them vary by era. Identify your model before buying anything: pull the tank lid and check the inside wall for a molded model number, look at the underside of the bowl near the back for a date stamp, and measure the rough-in (the distance from the finished back wall to the center of the closet bolts; most San Francisco homes are 12-inch, but 10-inch and 14-inch rough-ins show up in older buildings). For tubs and shower surrounds, measure the alcove width and the drain location rather than trusting a listing photo. Then decide on OEM versus aftermarket: American Standard OEM fill and flush valves fit specific tank models exactly, while a quality aftermarket flapper or fill valve can work fine if you match the tank series. Generic hardware-store kits often don’t seat correctly in American Standard tanks made before the mid-1990s. We’re an independent contractor and not affiliated with American Standard; we install what fits your fixture and your room. We also work with KraftMaid, Cambria and Silestone on the cabinet and countertop side of these projects.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your American Standard Bathroom Remodeling Is Failing

  • Water pooling at the toilet base. The wax ring has failed or the flange is cracked, and on a sloped or flexing subfloor the seal breaks again quickly. Left alone, that moisture reaches the joists.
  • A recurring ceiling stain below the bathroom. This usually points to a failed shower pan liner or a gap at the drain connection, not a surface caulk problem. Caulk over it and the leak keeps traveling.
  • Soft or spongy floor near the tub or shower. Water has been getting under the tile long enough to rot the subfloor. This is the point where a small repair turns into a real remodel.
  • Loose, hollow-sounding or cracked tile. The thin-set has debonded from moisture movement, and tiles will keep popping off one at a time. Grout cracking along the same line repeatedly is the same story.
  • A toilet that rocks or a tub that flexes underfoot. The fixture isn’t seated on a solid base, which stresses the seals and connections above it. It never gets better on its own.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Bathroom remodel pricing in San Francisco lands between $10,620 and $33,040 for the Lead range above; smaller spaces (a powder room or a tight hall bath) come in at $5,900 to $14,160, a walk-in shower runs $5,310 to $14,160, and a tub-to-shower conversion sits at $4,130 to $11,800. What drives the number: whether the subfloor and framing are sound, how much plumbing has to move, tile choice, and whether permits and inspection are part of the job. Your estimate is a written line-item quote, so you can see the fixture cost, labor, materials and permit fees separately. The number you see is the number you pay, and the work is covered by our 730-Day Done Right Promise.

DIY or Call Us?

You can safely check a few things yourself: the toilet’s rough-in measurement, the model number inside the tank, whether the floor near the shower gives underfoot, and whether water stains appear below the bathroom. Where DIY goes wrong is below the surface. Replacing a shower pan liner or a closet flange means opening the floor and getting the waterproofing right on the first pass, and a failed seal that gets covered over just rots the structure quietly for another year. In San Francisco’s damp, foggy climate, moisture under a bathroom floor doesn’t dry out on its own, so a bad repair compounds. Call (866) 320-2646 for a free estimate, and we’ll tell you honestly what needs to be opened up and what doesn’t.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch