Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Kitchen Remodeling: The San Francisco Owner’s Guide
We handle American Standard-compatible kitchen remodeling in San Francisco, and most full kitchen projects here land between $16,520 and $53,100 installed, depending on cabinet layout, countertop material, and how much plumbing and electrical gets moved. Smaller scopes like a cabinet-only install run $4,720 – $15,340. A kitchen isn’t a same-day part swap, and anyone telling you otherwise is selling you something. This is planned work. We’re an independent contractor, not affiliated with American Standard.
Owners usually land on this page when an American Standard fixture or fitting at the heart of their kitchen starts failing. It’s the faucet that drips no matter how hard you crank the handle, the sprayer that won’t fully seat, the undermount sink that’s let go of its seal, or the disposer flange that’s rusted through. Once the failure shows up, the trip through a kitchen remodel usually follows, because the cabinet base, the countertop cutout, and the water lines all have to be planned around the replacement.
Which American Standard Models This Applies To
American Standard has changed its kitchen fixture lineup over the years, and the parts don’t cross-combine freely. The old Heritage and Colony lines used cartridge-style faucet internals; the newer Fairbury and Lexington single-handle models run a ceramic disc valve. If you’re trying to match a replacement faucet, sprayer, sink strainer, or disposal flange to an existing sink base or countertop cutout, you need the model number off the faucet body or the stamped label on the underside of the sink rim, not just the family name. Measure the faucet hole spread (typically 8-inch centers on a three-hole deck, or a single 1-3/8-inch hole) and the sink cutout dimensions before you shop. Those two numbers decide whether a part even fits.
The OEM-versus-aftermarket decision matters here. Genuine American Standard replacement cartridges and aerators cost more but hold up to the mineral content in San Francisco’s Hetch Hetchy water, which is soft but not spot-free. Aftermarket cartridges sold as “universal” often don’t seal against the housing shoulder and start weeping within a season. For a mid-size remodel we spec American Standard OEM internals on the fixture, and if the homeowner wants a different brand entirely, we also work with KraftMaid, Cambria, and Silestone on the cabinetry and surfaces side. The fixture brand is one decision; the finish around it is a separate one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Kitchen Remodeling Is Failing
- The faucet won’t shut off cleanly. A steady drip or a handle that needs an extra quarter-turn to stop points to a worn valve cartridge or seat. In San Francisco, that wear accelerates when water pressure runs above 80 psi, which many older single-family homes in the Sunset and Richmond do.
- Water pooling at the base of the faucet. That’s the base O-ring failing, and on granite or marble counters it stains quickly. Left alone, it works its way under the deck and rots the cabinet top rail.
- The sprayer dribbles or won’t retract. A clogged check valve or a worn diverter inside the spout body is the usual cause. Not dangerous, just miserable.
- An undermount sink pulling away from the counter. Adhesive failure along the rim, often after years of a heavy cast-iron sink hanging on the bond. Fix it before the sink drops.
- Disposer flange rust through or leaks at the sink drain. A corroded flange at the sink bowl or a dried-out plumber’s putty seal around the drain. Minor now, a cabinet floor replacement later.
Replacement Cost & What’s Included
Installed pricing for the scopes that come up when a kitchen fixture or fitting fails, in San Francisco:
| Scope | Installed Price Range |
|---|---|
| Full Kitchen Remodel | $16,520 – $53,100 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Kitchen Island Installation | $3,540 – $11,800 |
What drives the range: cabinet grade and door style, countertop material (Cambria quartz and Silestone sit at different price tiers), whether the plumbing and electrical get relocated, and how much demolition is needed to get down to a clean surface. Every estimate we write is a line-item breakdown of parts and labor, so you see the fixture, the cabinetry, and the finish work as separate numbers. Upfront pricing, no surprises. The work is backed by our 730-Day Done Right Promise, which covers workmanship for two full years after the job closes.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can check safely. Turn off the water under the sink, look at the faucet body and sink rim for the model label, and measure the hole spread and cutout. Replacing an aerator or a faucet cartridge on the same fixture is a reasonable homeowner task if you’ve done it before and have the right part in hand. Where DIY goes wrong: pulling an undermount sink without bracing it, re-seating a heavy disposal with a bad flange, or cutting a new countertop opening without accounting for the cabinet structure below. That’s when a $40 part turns into a $3,000 cabinet repair. Call (866) 320-2646 and we’ll tell you straight which side of the line your job falls on.
FAQs
Typically 10 to 15 years for a faucet cartridge, and 8 to 12 for the sprayer and diverter assembly. San Francisco’s soft Hetch Hetchy water is gentle on scale, but the pressure swings in older homes do more damage to cartridges than mineral buildup does. Call (866) 320-2646 for an exact quote on replacement – estimates are free.
Often yes, if the problem is internal to the valve. A cartridge, seat, or O-ring swap can restore a dripping American Standard faucet for a fraction of a full fixture replacement. If the body itself is cracked or the finish is flaking at the base, replacement is the honest answer. We’ll tell you which applies before we open the box.
A faucet or sprayer replacement is a couple of hours. A full sink or cabinet-base swap runs a full day, and a kitchen remodel that moves plumbing or electrical takes weeks, not hours. Our technicians have up to 12 years of experience and will give you a realistic timeline in the estimate, not a hopeful one.
We match against the model number stamped on the fixture or sink rim, then order OEM parts through American Standard’s authorized supply chain. We don’t carry a stock of parts on a truck, and we don’t guess at compatibility. That’s why we ask for the model number before quoting the job. Call (866) 320-2646 to schedule a free estimate.
Get Your San Francisco Kitchen Project Priced
If a failing American Standard fixture has turned into a reason to redo the whole kitchen, or you just want the right part matched to the right model, call Groundwork Construction Co. of San Francisco at (866) 320-2646. We’re a California-licensed, insured, and bonded contractor, and every estimate is free, line-item, and backed by our 730-Day Done Right Promise. Calls are answered by a live person 24/7 – no voicemail, no waiting until Monday. First-time customers can take $1,000 off projects over $10,000, and we offer 0% financing for 18 months on approved projects. From foundation to finish line, built to last, backed in writing.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.