A Groundwork company - serving San Francisco, CA

Schluter Roofing in San Francisco, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Roofing: The San Francisco Owner’s Guide

We install Schluter-compatible roofing components across San Francisco, and the most common job we get is replacing worn or failed Schluter underlayment, shower-grade waterproofing transitions, and the roofing accessories that tie into them. A straightforward underlayment membrane swap typically runs $710 – $2,950 in this market, and most single-part jobs are finished in one visit to your property. You’ll usually discover the failure after the first serious rain: a damp patch spreading across a ceiling, a musty smell in an upstairs closet, or a bulge in the roof decking that wasn’t there last spring. In San Francisco’s fog belt, that pattern shows up fast because the membrane never fully dries between wet weeks.

Call (866) 320-2646

Which Schluter Models This Applies To

Schluter’s roofing line sits under the DITRA and KERDI family, and the part you need depends on which assembly your roofer installed. KERDI-BAND and KERDI-FLEX handle seams and movement joints; KERDI-COLLAR seals around penetrations; DITRA-DRAIN and the KERDI-DRAIN components work in transition zones where the roof meets an outdoor deck or flat roof field. You can identify your part from the printed label on the roll edge (the SKU covers a specific width, typically 3-1/8″ to 14-1/2″ for banding), or measure the exposed membrane and penetration diameter yourself before calling. One gotcha worth flagging: a KERDI-COLLAR sized for a 2″ pipe won’t seal a 2-1/2″ vent stack even though the packaging looks identical, so measure the pipe, not the collar.

We are an independent service provider, not affiliated with Schluter, and we don’t stock parts or carry them on trucks. On the OEM-versus-aftermarket question for Schluter specifically, we recommend OEM or a certified equivalent: the brand’s fleece laminate and adhesive chemistry are why the warranty holds, and a cheaper membrane that looks similar often won’t bond to the substrate the same way. Matching the exact SKU is worth the extra week.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Roofing Is Failing

  • Water stains spreading outward from a vent penetration. The KERDI-COLLAR has likely lost adhesion at its edge, letting water track under the fleece.
  • Lifted or curled membrane edges along a seam. KERDI-BAND adhesive degrades with thermal cycling, and San Francisco’s day-to-night swings in the Sunset and Richmond push that cycle hard.
  • Soft spots in the roof deck near a flat-roof transition. Water has been reaching the sheathing for weeks; the membrane breach is usually upstream at a seam or drain.
  • Musty smell in an adjacent closet or stairwell. A slow leak in the DITRA-DRAIN zone is wicking into framing rather than dripping through, so it hides longer.
  • Visible cracks or chalky white residue on the membrane. UV exposure has broken down the surface layer; this is a replacement call, not a repair.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what roofing-component work actually quotes out in San Francisco. These are installed prices, parts and labor together, and the range reflects access difficulty, roof pitch, and how much membrane has to come up to reach the failure:

Job Installed Range
Roof repair (component-level, includes membrane/seam work) $470 – $2,125
Tile roof repair (inspection, flashing, membrane tie-in) $710 – $2,950
Full roof replacement (when the assembly is past saving) $9,440 – $23,600

What drives the spread: Victorians and Edwardians in Noe Valley and the Mission often have steep pitches and tight lot-line access, which adds rigging time; a flat-roof component swap in SoMa or Potrero Hill is usually at the low end because the deck is walkable. We quote line items up front, and the number you see is the number you pay. All work is covered by our 730-Day Done Right Promise.

DIY or Call Us?

Severe weather isn’t the risk here; height is. San Francisco’s three- and four-story Victorians mean most of this work happens 30 to 45 feet up on a steep pitch, and a fall from a wet, mossy roof is not a “make it right later” situation. We ask that owners stay off the roof and stick to ground-level checks: look for stains, photograph the ceiling, confirm which membrane SKU is on your paperwork.

Where DIY really goes wrong is the sealing step. Schluter membranes fail when the wrong thin-set or adhesive is used, when the seam overlap is off by half an inch, or when the pour is done wet rather than dry. You won’t see that failure for six months, and by then the sheathing is soaked. For a $470 – $2,125 component repair, the labor is often cheaper than the risk. Call us at (866) 320-2646 and we’ll walk the roof, match the part, and quote it.

FAQs

How long does Schluter roofing last in San Francisco? Properly installed, the membrane and accessories hold 20 to 30 years, but in San Francisco’s fog zone we see 12 to 18 years before seams start lifting, because the constant moisture accelerates adhesive breakdown. If your roof is past that window, an inspection is worth the call.

Can the part be repaired instead of replaced? Often yes. A single failed KERDI-COLLAR or one lifted seam can usually be cut out, re-bonded, and re-sealed for $470 – $710. If the membrane is UV-cracked across the field, repair won’t hold and replacement is the honest answer.

How long will the swap take? A single-component replacement is a one-visit job, typically three to five hours. A larger assembly replacement or a transition involving multiple penetrations runs one to two days.

How do you source the part? We match your printed SKU to the current Schluter catalog and order the exact spec, usually within three to seven business days. We don’t inventory parts, so we order what your roof actually needs rather than what happens to be sitting on a shelf.

We also service KraftMaid, Cambria, and Silestone products for clients planning a broader project alongside the roof work.

Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch