A Groundwork company - serving San Francisco, CA

Schluter Driveway & Pavers in San Francisco, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Driveway & Pavers: The San Francisco Owner’s Guide

We install and repair Schluter-compatible driveway and paver systems across San Francisco, and most paver driveway projects here land between $8,260 and $21,240 installed, depending on square footage, base prep, and drainage. When a Schluter system part fails, you usually find out through water: efflorescence blooming across the pavers, a low spot that holds a puddle long after the fog burns off, or a paver edge that’s started to rock underfoot on the slope down to the garage. On San Francisco’s hillside lots, that’s rarely a paver problem. It’s almost always a failing drainage profile, edge restraint, or uncoupling membrane underneath, and the part has to match your specific Schluter assembly.

Call (866) 320-2646

Which Schluter Models This Applies To

Schluter builds several systems that apply to hardscape work, and the part you need depends on which one is under your pavers. The common assemblies in San Francisco are the Schluter-DITRA family for uncoupling and waterproofing under bonded overlays, KERDI-LINE and KERDI-DRAIN linear drainage profiles where a paver terrace meets a step-down or a garage threshold, and the TREP-E, TREP-S, and TREP-V edge profiles used to finish paver edges cleanly against walls, planters, and doorways. Identify what you have by measuring the profile’s visible face width (many edge profiles run in common widths like 3/8 inch and 1/2 inch) and reading the printing on any exposed membrane edge or drain flange in a utility cut. Schluter parts are branded, not generically sized, so the exact code matters. On the OEM-versus-aftermarket call: for the waterproofing membrane and drain flanges, we install genuine Schluter parts, because a knockoff that misses the fleece backing or the flange thickness will leak in our wet winters. For edge profiles and grates, a quality equivalent with matching dimensions is often fine and saves money. San Francisco buyers should know the assembly, not just the part name. We’re an independent contractor and not affiliated with Schluter, but we’ve installed enough of these assemblies to know where the corners get cut.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Driveway & Pavers Is Failing

  • Efflorescence blooming on the paver faces. White mineral haze that keeps coming back after you scrub points to moisture trapped below because the uncoupling membrane or drainage layer is compromised. In San Francisco’s marine fog, this shows up fastest on north-facing driveways.
  • Standing water or a persistent soft spot. A profile that’s shifted or a clogged linear drain keeps water from moving to the street. Left alone through a wet winter, that trapped water finds the base and the pavers start settling.
  • Rocking pavers along an edge. A failed edge restraint or broken TREP profile lets the perimeter lose support, and pavers shift under wheel load. This is the most common failure we see on San Francisco driveway aprons.
  • Delamination or loose membrane at a joint. If the membrane’s fleece has let go from the substrate, you’ll see hollow spots and hear a dull thud when you tap. That’s a bond failure, not a paver problem.
  • Cracked drain grate or cracked flange. A cracked linear grate or flange collects grit and stops draining, and cracks widen with traffic. This one means the part is past repair and needs replacement.

Replacement Cost & What’s Included

Here’s what a Schluter system repair or re-lay runs in San Francisco, installed, parts plus labor:

Scope Installed price range
Paver driveway installation (full) $8,260 – $21,240
Driveway replacement $5,900 – $16,520
Paver patio installation $4,130 – $12,980
Driveway sealing $295 – $825

What moves the number: which Schluter assembly is failing, how much of the base has to come up to reach the membrane or drain, and whether drainage has to be re-sloped to code. You get a written line-item quote before any work starts, upfront pricing with no surprises, and the 730-Day Done Right Promise on the workmanship. If the part itself is under a manufacturer warranty, we’ll identify the correct replacement and handle the sourcing.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check a few things yourself. Look for visible water pooling, tap the pavers to hear hollow spots, measure the profile width, and read any printed codes on exposed membrane or drain parts. That information helps when you call. Where DIY goes wrong is in the base. Replacing a drain flange or re-laying a membrane means lifting pavers, re-establishing slope, and getting a waterproof bond to a substrate you can’t fully see. On San Francisco hillside driveways, a member of the team can check drainage first, because a weak joint plus a wet winter can undermine a base and turn a small fix into a much larger one. Hire a trained installer for anything that involves opening the base. Call (866) 320-2646 to schedule a free estimate; a live person answers, 24/7.

FAQs

Other brands we service

We also work with material brands across our other lines, including KraftMaid, Cambria, and Silestone for kitchens and baths.

Ready to fix your Schluter system?

Groundwork Construction Co. of San Francisco installs and repairs Schluter driveway and paver systems across San Francisco and nearby areas, with background-checked, uniformed technicians, upfront pricing, and the 730-Day Done Right Promise on every job. Call (866) 320-2646 for a free estimate and design consult – a live person answers, 24/7. Also ask about 0% financing for 18 months and $1,000 off projects over $10,000.

Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch