A Groundwork company - serving San Francisco, CA
S

Sterling Driveway & Pavers in San Francisco, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sterling Driveway & Pavers: The San Francisco Owner’s Guide

We install and repair Sterling-compatible driveway and paver systems throughout San Francisco, and most full installations land between $8,260 and $21,240 depending on square footage, base prep, and whether we’re replacing existing concrete or asphalt. Sterling is a real brand with real installation requirements, so the “part” that usually fails first isn’t the paver itself – it’s the joint sand, the edge restraint, or the compacted base underneath. San Francisco owners typically discover the failure after a wet winter: a low corner of the driveway holds water, the sand washes out, and pavers start rocking underfoot. Call (866) 320-2646 for a free estimate and we’ll tell you exactly what’s failing and what it takes to fix it.

Call (866) 320-2646

Which Sterling Models This Applies To

Sterling’s paver lines run under a few series names, and compatibility comes down to three measurements: face dimensions, thickness, and the joint width the manufacturer expects. Standard Sterling concrete pavers are typically 60mm thick for residential driveways and 80mm for heavier vehicle loads – if your driveway sees an RV, a loaded truck, or a steep San Francisco grade, the 80mm profile matters. Measure the face of an existing paver and note the color and finish before you order anything; a “Sterling gray” from one production run won’t always match the next, and dye lots shift over time.

The OEM-versus-aftermarket call is real here. Sterling-brand replacement pavers keep the look consistent and match the joint geometry exactly, but lead times can stretch. Quality aftermarket pavers from a comparable manufacturer – Belgard is one we work with regularly – often perform identically and cost less. On a repair where you’re replacing a handful of units, we usually recommend matching the OEM if it’s available; on a full driveway, the aftermarket option is worth pricing. We regularly install, repair, and replace Sterling-compatible systems across San Francisco, and we’re an independent service provider – not affiliated with Sterling. We also work with KraftMaid, Cambria, and Silestone on the interior side of the home.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sterling Driveway & Pavers Is Failing

  • Pavers rocking or shifting underfoot. The base has settled or the joint sand has washed out. In San Francisco’s sandy soils and steep lots, water finds the weak spot fast.
  • Joint sand washing out after rain. This is the most common failure we see. Without proper edge restraint, water migrates under the pavers and carries sand with it.
  • Sunken or heaved sections. Poor compaction during the original install, or a tree root lifting a run of pavers. Both are fixable, but the base has to be exposed and rebuilt.
  • Efflorescence – white chalky haze on the surface. Common in coastal San Francisco microclimates where moisture sits in the pavers. Sometimes it’s cosmetic; sometimes it signals trapped water underneath.
  • Broken or chipped pavers at the driveway apron. Vehicle weight concentrated at the street transition – especially on a sloped entry – cracks pavers that weren’t rated for the load.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For San Francisco, here’s what to expect on installed pricing:

Scope Installed Price Range
Paver driveway installation $8,260 – $21,240
Concrete driveway installation $5,310 – $14,160
Asphalt driveway paving $4,130 – $10,620
Driveway replacement (full tear-out and redo) $5,900 – $16,520
Driveway sealing $295 – $825
Paver patio installation $4,130 – $12,980

What drives the range: square footage, base depth and compaction, whether old concrete or asphalt has to be hauled off, edge restraint and drainage work, and San Francisco hillside access. Parts and labor are quoted as separate line items – upfront pricing, no surprises. Every install is covered by our 730-Day Done Right Promise. Call (866) 320-2646 for an exact quote.

DIY or Call Us?

You can safely check a lot on your own: measure your pavers, note the color and finish, look for joint sand washing out, and feel for rocking underfoot. That’s useful information and we’ll ask for it. Where DIY goes wrong on pavers is the base. Lifting a sunken section and re-setting it without proper compaction and drainage just means it sinks again by the next rainy season – and the pavers you lifted are the ones that crack. Edging, base prep, and grade work are the parts that decide whether a driveway lasts. If you’re unsure what’s failing, call (866) 320-2646 and we’ll walk you through it.

FAQs

How long should Sterling pavers last on a San Francisco driveway? A properly installed paver driveway should hold up 25 to 30 years or longer; the pavers themselves often outlast the base work underneath. If the base was under-compacted or the edge restraint is weak, you’ll see movement within a few seasons. Call (866) 320-2646 for an assessment – estimates are free.

Can my failing Sterling driveway be repaired instead of replaced? Often yes. Joint sand and edge restraint failures, efflorescence, and isolated sinking are all repair jobs – we lift the affected pavers, fix the base, and reset them. A full replacement makes sense when the base has failed across most of the driveway. We’ll tell you honestly which one you need.

How long does a paver replacement take? A targeted repair is usually done in a single visit. A full driveway replacement typically runs two to four days depending on square footage and site access. We’ll give you a realistic timeline in your written estimate, not a guess.

How do you source Sterling-compatible pavers? We match to your existing paver’s face dimensions, thickness, color, and joint geometry, then source the OEM Sterling product or a quality aftermarket equivalent from our brand partners. We don’t stock pavers locally – every job is sourced to spec. Call (866) 320-2646 to start with a free estimate.

Contact us today at (866) 320-2646 to schedule your free estimate and design consult. Whether it’s a failing edged section or a full driveway planned from foundation to finish line, we’ll quote it upfront, back it with our 730-Day Done Right Promise, and answer the phone every time. Ask about $1,000 off projects over $10,000 and 0% financing for 18 months.

Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch