Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Kitchen Remodeling: The San Francisco Owner’s Guide
Kitchen remodeling built around CertainTeed materials in San Francisco typically runs $16,520 to $53,100 installed, and most projects move forward after a free in-home estimate and design consult rather than a same-day swap. Groundwork Construction Co. of San Francisco is an independent service provider and is not affiliated with CertainTeed. We work with CertainTeed products as a trusted brand partner across our kitchen remodels, and we install them to spec with upfront pricing and the 730-Day Done Right Promise behind the workmanship.
Owners usually land on this page the same way: a mid-1990s or 2000s kitchen has started to show its age, a ceiling stain appears below the bathroom above, a cabinet box sags, or a backer board behind tile is soft to the touch. The complaint is rarely “the whole kitchen failed.” It’s one component, often a membrane or underlayment, that reached the end of its service life and made the rest of the room look tired by comparison.
Key Takeaways
- Installed kitchen remodeling in San Francisco runs $16,520 to $53,100 depending on scope, materials, and whether the work includes structural or plumbing changes.
- CertainTeed products appear most often in our kitchens as tile backer board, gypsum panels, and ceiling substrate – not as a cabinet or countertop brand.
- A failed component doesn’t always mean a full remodel, but in a San Francisco condo built before 1980, it often reveals adjacent problems worth pricing at the same time.
- Live person, 24/7 answers our phones. Upfront pricing means the number you see is the number you pay.
Which CertainTeed Models This Applies To
CertainTeed makes a broad range of building products, and the ones we see most often in San Francisco kitchens are the Drywall and Gypsum division lines and the tile backer boards. If you’re trying to identify what’s behind your tile, your ceiling, or your cabinet wall, the fastest path is a visual inspection of an unfinished edge. CertainTeed backer board typically carries the brand name printed at intervals along the face; gypsum panels usually have the manufacturer, thickness, and fire rating stamped on the board’s paper face, most often visible in a closet, garage, or under-sink cavity where the wall was never finished.
The compatibility gotcha for San Francisco is thickness. CertainTeed backer board comes in 1/4-inch and 1/2-inch panels, and a lot of older kitchens were built with 1/2-inch. If you’re matching an existing installation and guess wrong, your tile plane shifts by a quarter inch, and that’s enough to throw off a backsplash return or a cabinet reveal. Measure the existing substrate with a caliper before you order anything.
On the OEM-versus-aftermarket question: CertainTeed’s own board is the correct match when you’re repairing a section of an existing installation, because thickness and paper face need to align with what’s there. For a full tear-out and rebuild, a quality equivalent backer board from another manufacturer performs the same job, and the decision comes down to price and availability rather than brand loyalty. CertainTeed materials are one part of the picture; our kitchen work also runs on KraftMaid cabinetry and Cambria or Silestone counters.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Kitchen Remodeling Is Failing
These are the symptoms that bring San Francisco homeowners to us, and what’s usually underneath each one.
- Soft or spongy spots under tile. A small area of give near a sink or dishwasher usually means moisture reached the backer board and the paper face has broken down. Once the board is compromised, the tile above it will start to tent or crack.
- Hairline cracks following a straight line. Cracks that track along a seam instead of randomly through a tile almost always point to movement at a board joint or a missing mesh tape and thinset. It’s a substrate failure, not a tile failure.
- Ceiling stains below the kitchen. In San Francisco’s older multi-story homes, a stain on the kitchen ceiling often traces to plumbing above, sometimes complicated by original galvanized supply lines. A quick diagnostic is to check whether the stain grows after the upstairs fixtures run.
- Peeling paint or bubbling drywall on a kitchen wall. This is typically a moisture problem, not a paint problem. CertainTeed gypsum panels will absorb water and deteriorate if the source isn’t stopped, and no amount of primer will fix that.
- Cabinet sagging or doors that no longer align. A failing cabinet box is a different animal. It’s often a wall anchor issue or a cabinet that wasn’t shimmed correctly on an uneven San Francisco floor.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what kitchen remodeling in San Francisco costs when CertainTeed materials are part of the build. These are installed ranges, so they include labor, materials, and finishing.
| Scope | Installed Range (San Francisco) |
|---|---|
| Full Kitchen Remodel | $16,520 – $53,100 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Tile Backsplash Installation | $945 – $2,950 |
| Kitchen Island Installation | $3,540 – $11,800 |
What drives the range: whether the kitchen is a full gut or a partial refit, the condition of the existing substrate, how much plumbing and electrical relocation is needed, and whether the room has any structural quirks – and in San Francisco, a lot of them do. That’s why we quote from an in-person visit rather than a phone estimate. Upfront pricing means the number in the written quote is the number you pay, with change orders only for scope you approve in writing. Our technicians have up to 12 years of experience, they’re background-checked, they arrive in uniform, and every kitchen we finish is covered by the 730-Day Done Right Promise. Calls are answered by a live person, 24/7.
DIY or Call Us?
Some of this you can safely check yourself. Test for soft spots by pressing a clean screwdriver handle into tile near the sink, dishwasher, and shower wall behind the kitchen. Look at a cutoff in a closet to confirm substrate thickness. Turn off the water supply, then watch the meter for movement overnight to rule plumbing in or out.
Be honest with yourself about where DIY stops working. A failed backer board behind tile requires tear-out, inspection of the framing, and correct reinstallation – if the moisture source is behind the wall or above the ceiling, a cosmetic repair will fail within a year. In San Francisco’s older housing stock, a plumbing leak or a failing supply line is a real problem, and our recommendation is to have it diagnosed rather than patched. A live person is on the phone 24/7 if you want to walk through what you’re seeing.
Call (866) 320-2646 to schedule your free estimate. Estimates are free, upfront, and there’s $1,000 off projects over $10,000, plus 0% financing for 18 months if that helps.
FAQs
Under dry conditions, CertainTeed backer board and gypsum panels last as long as the assembly around them – often 25 to 40 years. In a kitchen where moisture reaches the board, that timeline collapses to two or three years once the paper face is compromised. The board isn’t the variable; moisture control is. If you’re seeing any soft spots, call (866) 320-2646 for an inspection before it spreads.
Sometimes yes. A localized area of failed backer board can be cut out, replaced, and re-tiled, provided the substrate and framing behind it are sound and the moisture source is corrected. The repair stops being a good idea when the damage extends beneath the cabinets or when the framing itself has absorbed water. We’ll tell you honestly which situation you’re in after we open it up. Call (866) 320-2646 to get an estimate.
A small kitchen remodel typically takes two to three weeks; a full remodel with cabinetry, counters, and substrate work runs four to eight weeks depending on scope, inspection scheduling, and drying time. San Francisco permitting and inspection timelines can add time, and we won’t quote a shorter number than we can stand behind. Call (866) 320-2646 to get a schedule estimate for your project.
CertainTeed products are sourced through building materials suppliers and distributed locally; we specify the correct board thickness and type for your installation and confirm it before materials arrive on site. We don’t claim to carry stock or keep parts on a truck – each kitchen order is built for the specific job. If you’re not sure which CertainTeed product is behind your existing installation, we can identify it during the estimate. Call (866) 320-2646 to schedule.
If your kitchen is showing signs of failure and you want a straight answer about repair versus replace, call (866) 320-2646 for a free estimate and design consult. Our technicians have up to 12 years of experience, every project is backed by the 730-Day Done Right Promise, and the phone is answered by a live person 24/7.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.