Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Bathroom Remodeling: The San Francisco Owner’s Guide
We install CertainTeed-compatible bathroom remodeling across San Francisco, and a full bathroom remodel runs $10,620 – $33,040 installed, while a smaller bathroom lands at $5,900 – $14,160. Most San Francisco owners don’t go looking for this work until a symptom forces the call: a fan that rattles louder every month, mold blooming at the ceiling corner, grout that stays dark no matter how hard you scrub, or a shower pan that flexes underfoot. That flex is usually the first real warning, and it rarely fixes itself.
Key Takeaways
- Installed bathroom remodel pricing in San Francisco: $10,620 – $33,040.
- CertainTeed bath fans and gypsum board carry model-specific specs you need to match before ordering anything.
- We’re an independent service provider, not affiliated with CertainTeed.
- Every project is backed by the 730-Day Done Right Promise and upfront pricing with no surprises.
Which CertainTeed Models This Applies To
CertainTeed’s bathroom-relevant lines split into two buckets, and which one you have changes how we source parts. On the ventilation side, CertainTeed bath fans carry a model number on a label inside the grille or on the housing itself. Pop the grille and read it before you do anything else. The label tells you the CFM rating, the duct size (most residential units run 4-inch or 6-inch duct), and the motor assembly family, and that’s the number we match against. A fan rated for a smaller CFM won’t dry a San Francisco bathroom the way the original did, and mismatched duct sizing is the most common compatibility gotcha we see on older installs.
On the board side, CertainTeed makes moisture-resistant and mold-resistant gypsum products for wet areas, and those carry their own product codes printed on the board edge. If a board is already installed, we identify it by thickness, core color, and the printed stamp. When the stamp is gone, we measure and match by spec rather than guess. For a CertainTeed part specifically, the OEM-versus-aftermarket decision comes down to fit and warranty: OEM motors and fan assemblies match the housing exactly, while quality aftermarket equivalents can work but sometimes need adapter plates or trim changes. We quote both so you can see the real difference.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Bathroom Remodeling Is Failing
- The exhaust fan rattles or hums louder than it used to. Worn motor bearings or a loose blower wheel cause the noise, and it usually means the motor assembly is near the end of its run.
- Mirrors and walls stay fogged long after a shower. A fan pulling below its rated CFM, or a clogged duct, leaves moisture in the room. In San Francisco’s cool, damp coastal air, that trapped humidity has nowhere to go fast.
- Dark spots or peeling paint at the ceiling corner. Moisture-resistant board only resists so much. Once water gets past the paper face and into the core, the board softens and the finish fails.
- Grout and caulk that stay dark or pull away. Repeated wet-dry cycling in an under-ventilated bathroom breaks down sealant faster than most owners expect. Annual re-caulking becomes twice-a-year.
- A shower pan or tile that flexes or sounds hollow. Movement underneath means the substrate or board has taken on water. This is the symptom that turns a small repair into a full remodel, so don’t ignore it.
Replacement Cost & What’s Included
A full bathroom remodel in San Francisco runs $10,620 – $33,040 installed. A small bathroom remodel sits at $5,900 – $14,160. If the job centers on fixtures, a walk-in shower installation runs $5,310 – $14,160, a tub-to-shower conversion is $4,130 – $11,800, a shower replacement is $3,540 – $10,030, and a bathroom vanity installation is $945 – $3,540.
What drives the range: square footage, how much tile you’re replacing, whether the substrate has water damage, and the fan and ventilation work required. We quote parts and labor as separate line items so you see exactly what the CertainTeed fan assembly or moisture-resistant board costs versus the install labor. Upfront pricing, no surprises: the number you see is the number you pay. All work is covered by the 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself. Pop the fan grille and read the model label. Measure your duct size. Look for water staining on the ceiling and around the shower. Those are all observation-only, no tools beyond a screwdriver.
Where DIY goes wrong: swapping a fan motor without matching CFM and duct size, or tearing into water-damaged board and finding the substrate behind it is soft. Bathroom work involves water, wiring, and hidden moisture, and a small mistake behind the wall turns into a repeat job. If your symptoms point past a simple fan replacement, call us at (866) 320-2646 and we’ll tell you honestly whether it’s a repair or a remodel.
FAQs
Most residential bath fans run 8 to 15 years before the motor or bearings fail. San Francisco’s damp coastal climate pushes moisture loads higher, so fans here often fail toward the shorter end, especially in bathrooms without a window. Call (866) 320-2646 for an exact quote on replacement.
Sometimes. If the housing and duct are sound and only the motor or blower wheel is worn, replacing the motor assembly is a real option and costs less than a full unit. If the housing is cracked, the duct is undersized, or the fan is simply too small for the room, replacement is the better call. We’ll tell you which one you’re looking at.
A fan motor or assembly replacement is typically a single-visit job, usually a couple of hours. A full bathroom remodel is a multi-day project, and we give you the schedule in writing before we start. Call (866) 320-2646 to schedule your free estimate.
We match by the model number on your existing unit and confirm CFM, duct size, and housing dimensions before ordering. We don’t carry parts on a truck, so we source the correct component and confirm fit before we arrive. Estimates are free.
Contact Us
Whether you’re pricing a fan replacement or planning a full bathroom remodel, call (866) 320-2646 for a free estimate. A live person answers around the clock, and we’ll walk you through parts and labor line by line. We also work with KraftMaid, Cambria, and Silestone for your broader project needs.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.