A Groundwork company - serving San Francisco, CA

CertainTeed Windows & Doors in San Francisco, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CertainTeed Windows & Doors: The San Francisco Owner’s Guide

We install CertainTeed-compatible windows and doors throughout San Francisco, and most full replacements land between $5,310 and $17,700 installed, with impact-rated units running $9,440 to $29,500. Multi-point lock repairs, sash and balance replacements, and single-panel swaps usually get scheduled within a day or two of your estimate. Owners typically call us after the first hard rain finds a fogged pane, a sash that won’t seat, or a patio door handle that turns without engaging the latch.

Call (866) 320-2646

Groundwork Construction Co. of San Francisco is an independent service provider. We’re not affiliated with CertainTeed, and we don’t claim to be. What we do is match the right part to your window or door series, price it upfront, and stand behind the install with our 730-Day Done Right Promise. Upfront pricing, no surprises: the number you see is the number you pay.

Which CertainTeed Models This Applies To

CertainTeed’s window and door lineup has shifted over the years, and part compatibility depends far more on the series than on the brand name alone. The vinyl new-construction and replacement lines share some hardware families, but sash balances, tilt-latch designs, and multi-point lock gearboxes are series-specific. A glide shoe that fits one generation of tilt-in double hung won’t seat in another, even when the frame dimensions are identical.

Finding the right part starts with the identification label. On most CertainTeed vinyl units it’s a small silver or white sticker on the inside jamb, the top of the sash channel, or the frame head, and it carries the series and the manufacturing date. If the label is gone, we pull measurements at the frame, the sash, and the glass unit itself, because in San Francisco homes the rough opening is rarely a round number. That older Victorian and Edwardian framing means we’re almost always ordering to measured spec, not to a catalog size.

On OEM versus aftermarket: CertainTeed-branded hardware costs more and arrives with exact fit. Quality aftermarket equivalents for tilt latches, sash locks, weatherstripping, and screen frames are widely available and hold up fine. For multi-point door lock gearboxes and any component tied to the unit’s structural warranty, we go OEM unless you tell us otherwise. We don’t carry parts on a truck and we don’t claim to stock them locally. Every part is sourced to your unit.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CertainTeed Windows & Doors Is Failing

  • Fogging or condensation between the panes. The sealed glass unit has lost its desiccant seal and moisture is trapped inside. It can’t be wiped away or dried out from the room side, and the fix is a new insulated glass unit.
  • A sash that won’t stay up, or drops on its own. The spiral or block-and-tackle balance has lost tension. In San Francisco’s salt-heavy air near the coast, the balance hardware and the coil springs inside it corrode faster than the frame does.
  • The patio door handle turns but the door won’t latch or lock. The multi-point gearbox or the strike plates have worn or shifted. This is the one failure we treat as urgent, because an exterior door that won’t secure is a real security gap.
  • Drafts, water stains, or daylight at the frame. The weatherstripping, sweep, or corner seal has broken down. Left alone through a wet San Francisco winter, that gap feeds rot at the sill and jamb.
  • A tilt latch that won’t release, or a sash that won’t tilt in. The latch mechanism or the pivot shoe has cracked. These are usually the oldest plastic parts on the window and the first to fail after a decade of use.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what the work actually costs in San Francisco, installed:

  • Window replacement, full unit: $5,310 to $17,700 depending on size, series, and glass package.
  • Impact-rated window installation: $9,440 to $29,500. Larger openings, tempered glass, and multi-panel units push toward the top.
  • Hardware and part-only swaps (latch, balance, sweep, lock gearbox, single glass unit): priced per part plus labor, quoted upfront before we order anything.

The range comes down to how many units, the glass type, the series, and whether the opening needs reframing or a new sill. On the part-only side, the range depends on whether we’re installing OEM hardware or a quality aftermarket equivalent. Every quote is written line-item, so you see the part cost and the labor cost separately. Permits get pulled where required, and our 730-Day Done Right Promise covers the workmanship on every install.

DIY or Call Us?

Some of this is genuinely safe to check yourself. You can look at the identification label, feel for drafts at the frame with a wet hand, test whether each sash balance holds, and watch whether the door latches fully when you push it shut. Those checks tell us a lot before we ever measure.

What you shouldn’t do is remove and reseat an insulated glass unit, disassemble a multi-point door gearbox, or take apart a sash balance under tension. Those parts carry stored force and glass edges that are sharp and heavy. The part that goes wrong usually isn’t the part you thought it was, and a misordered unit costs you another two weeks. Call us at (866) 320-2646 and we’ll walk you through the check over the phone, free.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch