A Groundwork company - serving San Francisco, CA

Atlas Kitchen Remodeling in San Francisco, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Kitchen Remodeling: The San Francisco Owner’s Guide

Kitchen remodeling in San Francisco with Atlas-compatible materials and products typically runs $16,520 to $53,100 for a full project, and we schedule the work with a written scope rather than same-day dispatch. Atlas is a cabinetry line, so most owners discover a failure at the cabinet level rather than on a calendar: a door that won’t sit flush, a drawer that sticks in summer and rattles free by winter, or a hinge that suddenly leaves a 3-millimeter gap at the top corner.

Call (866) 320-2646

The parts picture matters here because San Francisco’s marine air and the seasonal swell in humidity punish cheaper assembly. When soft-close hardware gives out on an Atlas door, it rarely fails alone. Call us at (866) 320-2646 and we’ll walk you through what’s failing and what the fix costs.

Key Takeaways

  • Atlas kitchen projects in San Francisco run $16,520 to $53,100 depending on scope, cabinet count and countertop material.
  • Cabinet hardware, hinges and drawer slides fail first in humid coastal air, not the cabinet box itself.
  • We’re an independent install and service provider, not affiliated with Atlas.
  • Every job is covered by our 730-Day Done Right Promise.

Which Atlas Models This Applies To

Atlas builds cabinetry across several door profiles, finishes and box constructions, and the part that fits your cabinet depends on the series and the year it was built. The fastest way to identify what you have is to open a door and look at the label inside the cabinet box or on the back of the door. Manufacturer labels typically list the model number, the finish code and sometimes a production date. Measure the door height and the hinge cup bore – most Atlas doors use a 35mm cup bore, which is standard, but the overlay distance (how far the door sits over the cabinet opening) varies between full-overlay and half-overlay builds.

On the OEM-vs-aftermarket question for Atlas: OEM replacement doors and hinges match the original finish and bore pattern exactly, which matters if you’re replacing one door on a run of eight. Quality aftermarket hinges from brands like Blum or Grass often outperform the original hardware and cost less, and the bore pattern accommodates them. For drawer slides, aftermarket soft-close undermount slides are commonly a straight upgrade. We specify the part against your actual cabinet, not a guess from a photo.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Kitchen Remodeling Is Failing

The failures we get called about most often in San Francisco kitchens aren’t mysterious once you know what’s underneath them:

  • Doors that won’t stay aligned. The hinge screws have stripped the wood or the cabinet box has swelled. Coastal humidity expands particleboard and MDF, and a hinge plate that sat flush in a dry month sits proud in a wet one.
  • Drawers that stick or fall off the track. The slide or the mounting screws have given way. Repeated opening and a heavy load of canned goods work the screws loose in the box sides.
  • Soft-close mechanism that has stopped cushioning. The damper inside the hinge or slide has worn out. Dampers are a wear item, and on Atlas hardware they typically have a shorter service life than the metal body around them.
  • Finish peeling or bubbling near the sink and dishwasher. Steam and splash exposure break down the finish edge. This is common in San Francisco kitchens where the sink sits under a window that funnels moisture year-round.
  • Doors that are out of square or rubbing. The cabinet box has shifted or the floor has settled. This one usually means the cabinet needs re-securing before any part gets replaced.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what the work runs in San Francisco, priced as installed cost (parts plus labor), not a parts-only sticker:

Work Installed Range
Full kitchen remodel $16,520 – $53,100
Small kitchen remodel $10,620 – $23,600
Cabinet installation $4,720 – $15,340
Countertop installation $2,360 – $7,670
Backsplash installation $945 – $2,950
Kitchen island installation $3,540 – $11,800

The number sits where it does based on cabinet count and construction, countertop material (Cambria and Silestone quartz push the top of the range), whether the layout moves plumbing or electrical, and what’s behind the wall once we open it. You get a written line-item quote before anything starts, the number you see is the number you pay, and every job carries the 730-Day Done Right Promise. We’re licensed and insured, and we pull the permits the work requires.

DIY or Call Us?

There’s a safe middle ground here. You can tighten a loose hinge screw, swap a single soft-close hinge if the bore pattern matches, and check that your cabinet doors aren’t rubbing on the frame. That’s genuinely useful and you don’t need us for it.

Where DIY goes wrong: replacing a door on a multi-door run and discovering the finish and overlay don’t match, or reinstalling a drawer slide into swollen particleboard so the screws strip again within a month. Cabinet boxes aren’t dangerous the way electrical or gas is, but a cabinet that pulls off the wall is a real hazard. If you’re moving cabinets or adding an island, stop and call. (866) 320-2646, and we’ll give you a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch