Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Bathroom Remodeling: The San Francisco Owner’s Guide
If your Atlas bathroom components are failing, we install compatible replacements and full bathroom remodel packages in San Francisco, with most installed projects landing between $10,620 and $33,040. Vanity, shower surround, and fixture swaps within an existing layout usually finish in a single visit. Larger gut-level remodels run longer and get a written schedule before we start.
Owners in San Francisco usually discover the problem slowly. A vanity door that won’t close flush. Caulk lines around the tub that keep reopening no matter how many times they’re redone. Grout that crumbles at the shower floor while the tile above still looks fine. Then the water stain shows up on the ceiling below, and the small annoyance becomes a real repair. Atlas parts are built to a spec, and when one piece of that system gives out, the damage spreads quietly through the assembly around it.
We’re an independent service provider. We’re not affiliated with Atlas, but we know the product lines well enough to match the right replacement and install it to spec.
Which Atlas Models This Applies To
Atlas has produced several generations of bathroom cabinetry and vanity lines, and the part that fits one series often won’t fit another. Vanity cabinet widths, drawer glide mounting patterns, and hinge cup bore spacing all changed between production runs. Before we quote anything, we ask you to photograph the label inside the cabinet door or on the back panel. That label carries the model number and often the production date, which is the fastest way to get the right replacement the first time.
If the label is gone, we measure instead. Hinge cup diameter, screw hole spacing on the glide, and the exact cabinet depth narrow it down to a handful of options. For San Francisco homes, this matters more than most people expect. A lot of the city’s older buildings have custom-sized alcoves, and a stock-width Atlas cabinet from a newer run may not sit flush where the original was fitted.
The OEM-versus-aftermarket call is real. Factory parts guarantee fit, but aftermarket glides and hinges from established hardware makers often outlast the originals and cost less. For structural components like cabinet boxes and shower surrounds, we lean OEM or equal-spec. For wear items like glides, hinges, and seals, a quality aftermarket equivalent is usually the smarter buy.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Bathroom Remodeling Is Failing
- Cabinet doors that hang or rub. Worn hinge cups or stripped screw holes in the cabinet frame let the door sag out of alignment. Left alone, the hinge pulls further out of the wood until the door won’t close at all.
- Drawers that stick or won’t stay closed. Failed glides, usually from moisture swelling the cabinet box or from a glide that’s worn past its tolerance. In San Francisco’s damp, fog-heavy neighborhoods, cabinet hardware takes more abuse than most people realize.
- Recurring caulk failure at the tub or shower. Caulk that peels within months points to movement or trapped moisture behind the joint, not bad caulk. That trapped moisture is what rots the framing and subfloor.
- Grout cracking and hollow-sounding tile. Cracks along the shower floor or a tile that sounds hollow when tapped usually mean the waterproofing layer underneath has failed. This is the one that causes ceiling stains in the room below.
- Soft spots, staining, or musty smell near the vanity. Water finding its way behind the cabinet or under the floor. By the time the smell is obvious, the damage usually extends past the visible spot.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed bathroom remodeling in San Francisco runs $10,620 to $33,040 depending on scope. Here’s how the numbers break down by job type:
| Job | Installed range |
|---|---|
| Full bathroom remodel | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Shower replacement | $3,540 – $10,030 |
| Bathroom vanity installation | $945 – $3,540 |
What drives the range: tile selection, whether the layout changes, and how much water damage we find once the old assembly comes out. We quote parts and labor as separate line items so you can see exactly what you’re paying for. Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
DIY or Call Us?
Plenty of Atlas part swaps are safe to do yourself. Swapping a vanity door, replacing a drawer glide, or re-hanging a cabinet door are all reasonable weekend jobs. Measure carefully and photograph the old part before you remove it.
Where DIY goes wrong is anything behind the finished surface. Resetting a shower base, redoing waterproofing, or chasing a leak under a vanity means opening walls and floors. Done wrong, water keeps getting in and the damage compounds – and in a San Francisco multi-story home, that leak finds the neighbor below. Tile and shower pan work has a right way and a wrong way, and the wrong way isn’t visible until it’s expensive. If the problem is behind the surface, call us for a free estimate.
Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and give you upfront pricing – the number you see is the number you pay.
FAQs
A quality Atlas vanity cabinet typically lasts 15 to 20 years, and a shower surround about 10 to 15, before wear items fail. In San Francisco’s coastal climate, moisture exposure shortens that timeline – fog-belt neighborhoods see hardware and caulk fail noticeably faster than drier inland areas. Call (866) 320-2646 for an exact quote on replacement – estimates are free.
Often yes for hinges, glides, and seals – those are wear items and swapping them restores function cheaply. Once the cabinet box, shower pan, or waterproofing underneath has failed, repair turns into replacement because the assembly itself is compromised. We’ll tell you honestly which side of that line you’re on. Call (866) 320-2646 to schedule a free estimate.
A vanity replacement or a hardware swap is usually a single visit. A shower replacement or tub-to-shower conversion typically takes several days once the old assembly comes out and waterproofing is redone. We put the schedule in writing before work starts. Call (866) 320-2646 for your free estimate and design consult.
We identify the model from the cabinet label or by measuring the mounting points, then match the replacement to that spec – OEM for structural components, quality aftermarket for wear items like glides and hinges. We also work alongside KraftMaid, Cambria, and Silestone where a full vanity or counter update makes sense. Call (866) 320-2646 and we’ll walk you through the options.
Ready to stop patching and fix it right? The 730-Day Done Right Promise, upfront pricing with no surprises, and 0% financing for 18 months are all on the table. Projects over $10,000 get $1,000 off. Calls are answered by a live person, 24/7. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.