Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Home Additions & ADU: The San Francisco Owner’s Guide
Atlas-compatible home additions and ADUs in San Francisco typically run $53,100 – $153,400 for a full home addition and $106,200 – $259,600 for a new ADU, including design, permitting, and construction. A garage conversion sits in the middle at $35,400 – $94,400. Most owners reach this page after a smaller failure points them toward a bigger one: a stalled permit, a design that doesn’t fit the lot, a contractor who priced the shell but never accounted for San Francisco’s seismic and fire-separation requirements, or a pre-fab Atlas-style unit whose utility connections were never matched to the actual site. We install and coordinate Atlas-compatible additions across San Francisco, and we quote honestly before anyone breaks ground.
Which Atlas Models This Applies To
“Atlas” covers a wide field in this category. On the materials side, it’s the common name behind structural panels, engineered framing components, and some modular framing systems that show up in San Francisco additions and ADUs. On the systems side, an Atlas-branded unit can be a pre-engineered ADU shell, a modular structural kit, or a panelized wall package. Each carries different compatibility rules, and the failure mode you’re chasing usually points to which one you have.
Start with the label. Every Atlas structural panel or modular unit ships with a stamped plate or tag that lists the series, span rating, and load classification. Photograph it before anything else. If the tag is missing, the panel thickness, stud spacing, and sheathing exposure rating (bond classification matters on the exterior) tell a trained eye which series you’re working with.
Then make the OEM-versus-equivalent call. For structural components, we source OEM or code-equivalent replacements that carry the same engineering stamps and match the load path. For finish and trim items, a quality equivalent performs identically at a lower cost. We don’t claim to be an Atlas dealer; Groundwork Construction Co. of San Francisco is an independent service provider, not affiliated with Atlas, and we source parts the way a careful builder does: matched to spec, with paperwork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Home Additions & ADU Is Failing
- Bowing or deflection in the floor or roof plane. The panel or framing member is either undersized for the load or the span rating doesn’t match what was installed. A 1/4-inch sag you can see is usually a 3/4-inch problem underneath.
- Water staining at panel joints or sheathing seams. The exterior bond classification is wrong for San Francisco’s fog-heavy climate, or flashing failed at a penetration. The moisture is the symptom; the exposure rating is often the cause.
- Cracks, pops, or hairline failures along drywall seams in the addition. Movement at the framing above is translating through the finish. It can be a settling foundation or an under-supported header, and it needs to be traced, not patched.
- Condensation or air leaks at doors, windows, and utility penetrations. The envelope isn’t sealing where the modular or panelized section meets the existing structure. This shows up first at the joint lines.
- Out-of-square openings or doors that no longer latch. This tells you something is moving under the addition. On an Atlas-style panelized assembly, the root is often a connection that was spec’d for a different series than the one installed.
Replacement Cost & What’s Included
For San Francisco, installed pricing runs $53,100 – $153,400 for a home addition, $106,200 – $259,600 for ADU construction, and $35,400 – $94,400 for a garage conversion. What drives the range: the structural scope (new foundation versus tying into existing), the series of Atlas components you’re matching, permit and plan-check costs, and whether the work involves full envelope and finish or structural repair only. Historic districts and slope parcels push toward the upper end; a straightforward ground-floor addition on a level lot with an existing slab sits closer to the bottom.
Our quotes are line-item and upfront: parts, labor, permits, and inspection fees spelled out. The number you see is the number you pay. All work carries the 730-Day Done Right Promise, and we walk every addition through plan check and final inspection in San Francisco before we call it finished. Every project is backed in writing.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check the exterior joint lines, look for water staining at panel seams, photograph the Atlas label, and note where doors are sticking or floors are deflecting. That’s the diagnostic work, and it costs nothing.
What you should not attempt yourself: cutting into or sistering structural panels, opening a load path to replace a failing header, or touching utility connections into an addition. An undersized header or a mismatched panel can fail suddenly under load, and the consequences on an occupied San Francisco home are serious. Structural work is where DIY goes wrong in a way you can’t undo. Call (866) 320-2646 and we’ll trace the failure before anyone opens a wall.
FAQs
How long does an Atlas-style home addition last in San Francisco?
A well-built addition using properly spec’d Atlas components should hold for 50+ years, but the envelope is what decides it in San Francisco’s fog belt. Poor exposure ratings and failed flashing shorten that dramatically, which is why we spec bond classifications for the climate. Call (866) 320-2646 for an honest assessment of what you have.
Can a failing Atlas addition be repaired instead of replaced?
Often, yes. A defective panel joint, failed flashing, or localized header problem can be repaired without tearing out the whole addition. We won’t know until we trace the load path. Call (866) 320-2646 and we’ll give you a straight answer on repair versus replacement.
How long does it take to swap or repair an Atlas component?
A localized repair can run a few days to a couple of weeks, while a full panel replacement or a structural correction runs longer and involves inspection. Additions themselves are months, not days. Call (866) 320-2646 for a schedule after we see the site.
How do you source the right Atlas part?
We match by the stamped series, span rating, and load classification on the unit, then source OEM or code-equivalent components with the engineering paperwork behind them. We’re an independent service provider, not an Atlas dealer, so we source what your structure actually needs. Call (866) 320-2646 for a sourced, priced quote.
We also service adjacent trades with brand partners including KraftMaid, Cambria, and Silestone, so a single call can cover the addition and the kitchen at its center.
Book Your Free Estimate
San Francisco additions and ADUs are big decisions, and you should price them with a builder who shows you the numbers before you sign. Call (866) 320-2646 for a free estimate and design consult. We answer with a live person, 24/7, and every project is covered by the 730-Day Done Right Promise, from foundation to finish line.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.