A Groundwork company - serving San Francisco, CA

Tamko Windows & Doors in San Francisco, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Windows & Doors: The San Francisco Owner’s Guide

We install and service Tamko-compatible windows and doors across San Francisco, with typical installed window replacement running $5,310 to $17,700 and impact-rated installations from $9,440 to $29,500 for a whole-house package. Most parts calls fall into two buckets: a failed window balance or sash hardware on a Tamko unit, or a door that’s dragging, leaking, or won’t latch because the hinges, threshold, or weatherstripping have given out. Owners usually notice when a sash won’t stay up, a door scrapes the jamb through the dry season and swells shut in the fog, or water shows up on the interior sill after a storm.

Call (866) 320-2646

Which Tamko Models This Applies To

Tamko makes a wide range of vinyl and aluminum window lines plus entry and patio door systems, and the part you need depends entirely on which series you have. The model label is your starting point: Tamko places a sticker on the top or side of the sash frame, or on the head jamb of a door, with the series and size code. If the label is gone, we measure the sash and frame, check the balance type, and match the hardware to the profile.

The compatibility gotcha that trips up most San Francisco owners buying online: Tamko’s vinyl window balances come in specific channel depths and spring weights, and a “universal” replacement balance from a big-box store often won’t seat or won’t hold the sash. The weight rating must match the sash load, which changes with glass package and size. For doors, the threshold and hinge pattern are model-specific, and an aftermarket hinge that looks identical can throw the door out of square within a season.

OEM parts come with a guaranteed fit but cost more and take longer to source. Quality aftermarket equivalents exist for common hardware (balances, weatherstrip, rollers, hinges), and we’ll tell you honestly when one is a safe swap and when it isn’t. We aren’t affiliated with Tamko. We’re an independent service provider, so our recommendation is based on what fits your unit and holds up in Bay Area weather, not on moving a brand’s inventory.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Windows & Doors Is Failing

These are the symptoms we see most often in San Francisco homes, and each points to a specific part behind it.

  • The window sash won’t stay up, or slams down when you open it. That’s a failed balance or a broken balance spring. Vinyl balances wear out and lose tension long before the frame shows any problem.
  • Water on the interior sill or fogged glass after a storm. A failed weather seal, a cracked glazing bead, or a seal failure in the insulated glass unit itself. San Francisco’s fog and salt air speed up seal degradation, especially on west-facing windows near the ocean.
  • The door drags, scrapes, or won’t latch. Usually worn hinges, a sagging frame, or a threshold that’s settled. In older San Francisco homes, seasonal wood movement is a factor too.
  • Drafts or daylight around the door perimeter. Deteriorated weatherstripping or a worn sweep at the bottom. Easy to spot on a cold morning with the door closed.
  • A roller or track that’s stiff or grinding on a sliding patio door. Worn rollers or a bent track. Left alone, a stiff roller grinds the track and turns a small part swap into a bigger repair.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed window replacement in San Francisco runs $5,310 to $17,700 depending on size, glass package, and how many units you’re doing. Impact-rated window installation runs $9,440 to $29,500, and that range reflects the heavier glass and reinforced framing those units require. Door hardware, balances, and weatherstripping repairs are priced line by line, so you see parts and labor separately.

Scope Installed range
Window replacement (per project) $5,310 – $17,700
Impact-rated window installation $9,440 – $29,500
Hardware, balance, weatherstrip repair Quoted line by line

What drives the range: number of units, glass upgrades, whether the frame is sound or needs reframing, and the complexity of the opening in an older San Francisco building. We quote upfront, with no change orders, and all work is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.

DIY or Call Us?

Some things you can safely check yourself. Look for the model label, note whether the sash balances or drops, and check that hinges and weatherstrip aren’t visibly worn. Measuring your sash and opening is useful too. That information gets you a faster, more accurate quote.

Where it goes wrong: forcing a replacement balance that’s the wrong weight can crack a vinyl sash, and re-hanging a door on the wrong hinge throws the whole frame out of square. On a high window or a door that’s part of an exterior wall, a bad install opens a water path that shows up months later. We recommend a trained installer for anything involving the frame, glazing, or exterior seal. If you’re not sure which part is at fault, call (866) 320-2646. A live person answers around the clock, and estimates are free.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch