Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The San Francisco Owner’s Guide
Kitchen remodeling work built around PGT-compatible components in San Francisco typically runs $16,520 to $53,100 installed, depending on scope, cabinet line and countertop material. We handle the full installation, not just the part, and most single-component swaps (one window, one door unit, one hardware set) are completed in a single visit. If a PGT window or door has failed inside your kitchen, or a remodeling element tied to that product line has come loose, this page covers what to expect.
Owners usually find the problem the same way. A kitchen window that once slid cleanly now drags halfway. Condensation shows up between panes on a foggy Inner Sunset morning. Or a door unit in a remodeled kitchen starts whistling when the west wind picks up off the ocean. That’s the moment the search begins.
Which PGT Models This Applies To
PGT makes windows and doors across several product lines. In San Francisco kitchens, the units we see most are aluminum and vinyl single-hung and horizontal slider windows, plus sliding glass and hinged patio doors that open off a kitchen into a rear yard or light well. The series label is usually etched on the glass in a corner or stamped on the frame near the lock. If it’s faded, measure the visible glass and the frame opening and match against the unit’s original spec sheet.
Here’s the compatibility trap: PGT changed frame profiles and hardware patterns across production runs, and a replacement sash from one run will not seat correctly in a frame from another. Matching by model name alone gets people in trouble. You need the actual unit measurements plus the production era, which is often visible on the label. When the original label is gone, we measure the rough opening and work backward.
On OEM versus aftermarket: PGT-branded replacement parts are the safest match for newer units still under or near their factory coverage. For older units, a quality aftermarket sash or hardware set often fits better, costs less, and performs the same. We’re an independent service provider, not affiliated with PGT, so we quote both paths honestly and let the measurements decide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Kitchen Remodeling Is Failing
- Fogging between the panes. The sealed glass unit has lost its argon fill and moisture barrier. Once that seal fails, no amount of wiping fixes it; the insulated unit has to be replaced.
- Difficulty sliding or locking. Rollers flatten, tracks collect grit, and lock hardware wears. On sliders this usually starts as a sticking point and turns into a unit that won’t fully close.
- Drafts or whistling at the frame. Weatherstripping compresses over time, and in San Francisco’s marine air the seal around the frame can also pull away. Both let cold fog-belt air straight into the kitchen.
- Water staining on the sill or casing. This is the one to take seriously. A failed seal or flashing detail lets moisture in behind the frame, and in this climate that leads to rot faster than most homeowners expect.
- Condensation on the interior glass in cool months. Some is normal in a kitchen. Persistent heavy condensation points to a failing seal or a unit that was never right for the room’s humidity.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For San Francisco, installed pricing on the kitchen remodeling work tied to these components lands in these ranges. The number you see is the number you pay; no change orders once the work starts.
- Full kitchen remodel: $16,520 – $53,100
- Small kitchen remodel: $10,620 – $23,600
- Cabinet installation: $4,720 – $15,340
- Countertop installation: $2,360 – $7,670
- Backsplash installation: $945 – $2,950
- Kitchen island installation: $3,540 – $11,800
What drives the range: unit size and glazing type, whether framing or flashing repair is needed behind the wall, and material choice on the surrounding work. We separate parts and labor on every written quote so you can see exactly what each line costs. All work is covered by our 730-Day Done Right Promise. If we installed it and something isn’t right, we make it right.
DIY or Call Us?
You can safely check the label on the glass, measure the opening, wipe down tracks, and confirm whether the lock engages. Those are diagnostic steps, not repairs.
Where DIY goes wrong: replacing an insulated glass unit or re-seating a frame means removing the sash, handling breakable glass, and re-flashing the opening so it stays watertight. In a kitchen, a botched seal means moisture behind the wall, and in San Francisco’s fog-heavy climate that damage compounds quietly. We’ve repaired plenty of attempts that started as a weekend project and ended with a rotted sill. There’s no shame in it; glass work and flashing are their own trade.
If you’ve confirmed the unit is failing, call (866) 320-2646 and we’ll talk through whether it’s a part swap or a fuller fix. Calls are answered by a live person, 24/7.
FAQs
Most insulated glass units hold their seal for 15 to 25 years, though units facing the ocean fog belt and salt air often fail on the shorter end. Frame and hardware typically outlast the glass. When the seal goes, replacing just the insulated unit is usually the right call. Call (866) 320-2646 for a free estimate on your specific unit.
Sometimes. Rollers, locks, and weatherstripping are serviceable, and that’s the cheaper route when the glass seal is still intact. Once the insulated unit has fogged or filled with condensation, repair isn’t possible and replacement is the honest answer. We check which one you’re facing before quoting anything.
A single window or door unit swap in a kitchen is typically completed in one visit, with most of the time going to careful removal and re-flashing. Larger remodeling work alongside it runs longer and gets a schedule in writing. Call (866) 320-2646 to get your timeline.
We measure the opening and match against the unit’s production-spec measurements, then source the OEM part or a quality aftermarket equivalent based on which fits your unit better. You get both options priced. We don’t stock parts or carry them on a truck; the match is made to your specific unit. Call (866) 320-2646 to start.
Groundwork Construction Co. of San Francisco works with PGT units alongside other trusted kitchen brands including KraftMaid, Cambria and Silestone. From foundation to finish line, our background-checked, uniformed technicians handle the work, and every project is backed by our 730-Day Done Right Promise. Upfront pricing, no surprises. We’re also running $1,000 off projects over $10,000 and 0% financing for 18 months. Call (866) 320-2646 for your free estimate and design consult.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.