Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Windows & Doors: The San Francisco Owner’s Guide
We install CGI-compatible windows and doors across San Francisco, and a full window replacement typically runs $5,310 to $17,700 installed, with impact-rated units from $9,440 to $29,500. If a window is sticking, fogging between the panes, or letting wind whistle through a closed sash, the part has usually failed at the seal, the balance, or the hardware. San Francisco owners tend to notice it on the first foggy morning in the Sunset or after a wind-driven rain off the Pacific, when water shows up where it shouldn’t. We’re an independent service provider and not affiliated with CGI.
Key takeaways:
- Fogged glass means a broken seal, not dirty glass. Cleaning won’t fix it.
- Vinyl frames and hardware are matched to a specific series. Measure before you order.
- Coastal salt air and year-round damp shorten hardware life here versus inland.
- Most window replacements finish in a single visit. Estimates are free.
Which CGI Models This Applies To
CGI makes vinyl and aluminum windows and patio doors, and the part you need depends entirely on which series and configuration is in your wall. A double-hung sash balance from one series won’t drop into another. Before anyone quotes you, we need the series name, the glass unit size, and the frame profile.
Here’s how to identify what you have. Open the sash and look for a manufacturer label on the frame or in the head jamb. It usually carries the series and a date code. If the label is gone, measure the visible glass width and height to the nearest sixteenth of an inch and note whether the frame is vinyl or aluminum. For patio doors, record the panel width and whether it slides or swings.
On OEM versus aftermarket: for glass units and proprietary hardware, genuine CGI parts are the safer match because the dimensions and finish have to line up exactly. For generic items like weatherstripping, screens, and rollers on standard tracks, a quality aftermarket equivalent does the job at a lower price. We tell you which side of that line your part falls on before you spend anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Windows & Doors Is Failing
- Fog or condensation between the panes. The sealed glass unit has lost its gas fill through a failed edge seal. It won’t clear on its own, and the unit needs replacing rather than cleaning.
- The sash won’t stay up, or drops when you let go. The balance or spiral spring that holds the sash has worn or snapped. On older vinyl units the balance shoe cracks first.
- Water staining or softness at the sill. Failed perimeter caulk or a clogged weep channel lets rain back up under the frame. Catch it early and it’s a reseal; wait and the framing behind the wall gets wet.
- A draft or whistle when the window is closed. Worn weatherstripping or a misaligned lock pulls the sash away from the seal. In San Francisco’s wind, that gap shows up fast.
- The door drags or the latch won’t catch. A worn roller, a dropped hinge, or a shifting frame. On sliders the roller is usually the culprit; on swing doors, check the hinge screws first.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Window replacement in San Francisco runs $5,310 to $17,700 installed. Impact-rated window installation runs $9,440 to $29,500. What drives the range is glass type (standard dual-pane versus laminated impact glass), frame material, size, and whether the opening needs reframing.
- Single sealed glass unit swap: the lower end of the window replacement band, parts plus labor.
- Full window replacement, standard glass: mid band, includes removal, new unit, flashing and seal.
- Impact-rated replacement: upper band, priced per unit for the heavier laminated glass.
- Patio or entry door hardware and roller service: priced as a smaller repair within the same job.
Your quote is upfront and itemized: parts, labor, disposal, and sealant. The number you see is the number you pay, and every install carries our 730-Day Done Right Promise. If it’s not done right, we make it right.
DIY or Call Us?
Swapping a screen, re-caulking a perimeter joint, or cleaning a weep channel are safe, sensible jobs for a homeowner with a ladder and an afternoon. Replacing a sealed glass unit or a sash balance is where DIY goes wrong. The glass is heavy and can crack during handling, the balance is under tension and can snap back, and a unit set out of square leaks for years. And on any second or third-story window in a San Francisco Victorian or Edwardian, working from height is its own risk.
Our technicians have up to 12 years of experience and arrive background-checked and in uniform. If you’re not sure whether your part is a five-minute fix or a full replacement, call (866) 320-2646 for a free estimate. A live person answers around the clock.
FAQs
A sealed glass unit typically lasts 15 to 25 years, and hardware like balances and rollers often goes sooner in our coastal climate. Salt air and constant damp wear out metal parts faster here than inland, so a window near the ocean may need hardware service years before one in Noe Valley.
Yes, if only the glass unit failed and the frame is sound. We swap the sealed unit without touching the frame, which costs less than a full window replacement. If the frame is warped or the sill is water-damaged, a full replacement is the honest answer. Call (866) 320-2646 for an exact quote; estimates are free.
Most single-unit swaps finish in one visit, and a whole-house set can run two to three days depending on count. We schedule around you and confirm the timeline in writing before we start.
We match the series, glass size, and frame profile from the label or from measurements you or we take on site. For proprietary glass and hardware we order the correct-spec part; for standard items like weatherstripping and rollers we use a quality equivalent. You get the parts list and price before any work begins.
We also service KraftMaid, Cambria, and Silestone products for San Francisco homeowners planning broader work.
Windows and doors that are failing cost you comfort and, over time, water damage behind the wall. Groundwork Construction Co. of San Francisco handles the diagnosis and the install from first call to final walkthrough, backed by upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000. Call (866) 320-2646 for a free estimate and design consult. A live person answers any hour, every day.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.