Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The San Francisco Owner’s Guide
We install CGI-compatible bathroom fixtures and remodeling components for San Francisco homeowners, and most full bathroom remodels here run $10,620 to $33,040 installed. Smaller scopes (a single vanity, a shower replacement) land well below that. Same-day service is not realistic for a remodel, and we won’t pretend otherwise: we schedule a free estimate, then a real project timeline.
Owners usually discover a failing CGI component the same way. The vanity starts rocking a hair when you lean on the counter. A caulk line at the shower base that you’ve recaulked three times keeps cracking open. The toilet rocks or the supply valve weeps at the wall. In a San Francisco Victorian or Edwardian, that rocking vanity often traces back to a floor that’s out of level by more than an inch, not a bad fixture. We see this constantly in Noe Valley and the Mission, where these fixtures sit on 100-year-old joists. The part didn’t fail. The substrate under it did.
Which CGI Models This Applies To
CGI makes vanity bases, shower surrounds, tub surrounds, and medicine cabinets, and the lineup splits roughly into ready-to-assemble and fully assembled series. The compatibility gotcha that bites owners most: a vanity base sold as a “36-inch” is 36 inches at the cabinet, but the countertop it’s drilled for may be a 37-inch vanity top with a 1/2-inch overhang on each side. Order the wrong top and it won’t sit flush. Measure the cabinet, not the old countertop, before you buy anything.
Identifying the right piece means reading the label inside the cabinet door or on the back panel: you’ll find a model number and a series name. Photograph it before removal, because once the cabinet is out the label goes with it. On the OEM-versus-aftermarket question, CGI’s own replacement parts match factory dimensions exactly, so a swap is drop-in. Quality aftermarket bases are cheaper and often just as solid, but you or your installer need to verify the countertop cutout and the plumbing rough-in positions line up. We’re an independent service provider, not affiliated with CGI, so we match the part to your actual cabinet rather than pushing a house brand. For anyone comparing cabinetry lines, we also install KraftMaid, Cambria, and Silestone components.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Bathroom Remodeling Is Failing
- Vanity rocks or the cabinet separates at the seams. The base wasn’t shimmed to a level floor, or the particleboard swelled after a slow leak. In San Francisco’s damp, fog-heavy microclimates, a cabinet near an exterior wall takes on moisture year-round.
- Caulk at the shower or tub base keeps cracking. The surround has shifted, or the subfloor flexes underfoot. Recaulking every few months is a symptom, not a fix.
- Water staining or soft spots on the cabinet floor. A supply line or drain has been weeping behind the cabinet, and the finish is failing from the inside. This is the one that turns a $945 vanity swap into a floor repair.
- Medicine cabinet door won’t stay shut or the mirror is delaminating. The hinge or the mirror backing has degraded, common in bathrooms with heavy steam and no working exhaust fan.
- Shower surround panels lifting at the seams. The adhesive or backing has given way, and water is getting behind the panel. Left alone, that moisture reaches the framing.
Replacement Cost & What’s Included
For San Francisco, here’s how the line items stack up. These are installed ranges, parts and labor together, and they’re the numbers we quote.
- Full bathroom remodel: $10,620 – $33,040
- Small bathroom remodel: $5,900 – $14,160
- Walk-in shower installation: $5,310 – $14,160
- Tub-to-shower conversion: $4,130 – $11,800
- Shower replacement: $3,540 – $10,030
- Bathroom vanity installation: $945 – $3,540
What drives the range: whether the subfloor is sound or needs repair, whether we’re re-tiling or swapping a drop-in surround, and whether the plumbing rough-in has to move. A straight vanity swap sits at the bottom. A full gut with new tile and relocated plumbing sits at the top. You get a written line-item quote before we start, upfront pricing with no surprise change orders, and every project is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely handle the diagnosis: check whether the floor is level with a straightedge, photograph the model label, and confirm whether the caulk failure is surface or structural. What goes wrong in DIY is the swap itself. Bathroom plumbing has water and drain lines behind the wall, and a vanity that isn’t properly shimmed and secured to studs comes loose again within months. Same with a surround: get the backing wrong and you’re redoing it. For anything that involves cutting into a wall or moving a supply line, that’s trained-professional work. Our technicians have up to 12 years of experience and are background-checked and uniformed, and we pull the permits and pass inspections. If you want an honest read on whether you’re looking at a swap or a bigger fix, call (866) 320-2646 for a free estimate. It costs nothing to find out.
FAQs
How long does a CGI bathroom component last? A properly installed CGI cabinet or surround runs 15 to 20 years. The failure comes from moisture, not the material itself, and in San Francisco’s foggy climate a bathroom without a working exhaust fan can shorten that life by several years. Call (866) 320-2646 for a free estimate on replacement.
Can it be repaired instead of replaced? Sometimes. A cracked caulk line or a loose hinge is a repair. A cabinet with a swollen, water-damaged base or a surround leaking behind the panel usually needs replacement, because the damage is underneath. We’ll tell you which one you’re facing. Call (866) 320-2646 and estimates are free.
How long does the swap take? A vanity replacement is typically a single visit. A shower replacement or tub-to-shower conversion runs several days because of demo, backing, and tile cure time. We give you the timeline in the written quote, not a guess on the phone. Call (866) 320-2646 to schedule your estimate.
How do you source the CGI part? We match the part to your cabinet’s model number and series, then source the compatible piece and verify dimensions against your actual top and plumbing rough-in before install. No guesswork and no forcing a part that doesn’t fit. Call (866) 320-2646 for an exact quote.
Get Your San Francisco Bathroom Priced Right
Whether you’re replacing a single vanity in a Sunset bungalow or reworking a full bath in Bernal Heights, the next step is a free estimate with a written line-item quote, the same number at the end as the start. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 to schedule your free project estimate and design consult. A live person answers, 24/7. Upfront pricing, no surprises, and a guarantee that holds for 730 days.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.