A Groundwork company - serving San Francisco, CA

CGI Fence Installation in San Francisco, CA

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Fence Installation: The San Francisco Owner’s Guide

We install CGI-compatible fence systems across San Francisco, and a full fence installation typically runs $4,130 to $10,620 depending on the material, linear footage, and site conditions. Most installations are scheduled within a week of your estimate, and every job is backed by our 730-Day Done Right Promise. Homeowners usually call us when a fence has started leaning after a winter of wind and fog, when boards or pickets have rotted at the base, or when an existing fence simply can’t hold up to another season of salt air and hillside runoff. We’ll inspect what’s there, tell you honestly whether a repair or a full replacement makes sense, and price it upfront so the number you see is the number you pay.

Call (866) 320-2646

Which CGI Models This Applies To

CGI fence systems span several series lines – ornamental aluminum, vinyl, and composite rails – and the parts aren’t interchangeable across them. Posts, brackets, caps, and rail profiles differ by series, and the same nominal height can use different post gauges depending on the line. The fastest way to identify what you have is to find the manufacturer’s label inside a post cap or on the inside face of a rail, then measure the actual post thickness and rail width with a tape – a 1/2-inch difference in rail gauge changes which brackets fit.

For CGI specifically, the OEM-versus-aftermarket call usually comes down to the post and bracket system. OEM hardware matches the original profile exactly and keeps your warranty intact, while quality aftermarket rails can be a solid option for a partial repair when the original series is discontinued. We’ll tell you which path makes sense for your fence and your budget – no pressure either way. Worth knowing: San Francisco’s fog belt and salt air are hard on metal fasteners and vinyl alike, so we always spec hardware rated for coastal exposure rather than the standard interior-grade brackets some suppliers stock. We’re an independent service provider and not affiliated with CGI; we simply know the product line well. We also work with KraftMaid, Cambria, and Silestone on our other service lines.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Fence Installation Is Failing

Fence failures rarely happen overnight. In San Francisco’s wind corridors and fog-heavy neighborhoods, the clues build up over a season or two. Here’s what to watch for:

  • Leaning or wobbly posts. Usually means the post footing has shifted or the concrete collar has cracked – common on our hillside lots where soil movement is routine.
  • Rust streaks or corrosion at brackets. In salt-air neighborhoods, standard fasteners fail long before the fence panels do. Coastal-rated hardware is the fix.
  • Rot or soft spots at the base. Wood and some composite rails wick moisture from ground contact and fog condensation. If a picket gives when you press it, the core is gone.
  • Loose or rattling panels. Often a worn bracket or a rail that’s pulled out of its channel. Sometimes it’s just fasteners; sometimes it’s a sign the whole run needs re-anchoring.
  • Sagging gates. Gate hinges and posts take the most load and fail first. A sagging gate usually points to a footing issue underneath, not just the hinge.

Replacement Cost & What’s Included

Fence installation in San Francisco runs $4,130 to $10,620 installed, and that range reflects real variables: linear footage, material choice, post spacing, gate count, and how hard it is to dig and set posts on your lot. A flat backyard and a steep Bernal Heights slope are two very different jobs, and we price them differently because the labor is genuinely different.

Our estimates are line-item and upfront – materials, labor, disposal, and permits where required, all broken out. What drives the top of the range: longer runs, ornamental aluminum, multiple gates, and difficult digging. Most installations are completed in a single visit. Every job carries the 730-Day Done Right Promise, so if something isn’t right, we come back and make it right. Estimates are free, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

There’s a safe split here. You can check for loose brackets, tighten visible fasteners, and note which posts are soft or leaning – that’s useful information. What you shouldn’t take on is post footing work or re-anchoring a leaning run, because a fence that isn’t set correctly becomes a wind hazard and can damage your property or a neighbor’s. On San Francisco’s slopes and in high-wind corridors, footing depth and concrete work need to be done right the first time. If you’ve got multiple failing posts or a gate that’s pulling away, that’s a sign the underlying structure needs professional attention, not a patch job. Call us at (866) 320-2646 and we’ll give you a straight answer and a free estimate.

FAQs

Get Your Free San Francisco Fence Estimate

A failing fence is a security and safety issue, and it’s not going to fix itself. We’ll come out, inspect what you’ve got, and give you a clear, upfront estimate with no surprises – free, with no obligation. Calls are answered by a live person 24/7, our technicians are background-checked and arrive in uniform, and every job is covered by the 730-Day Done Right Promise. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 to schedule your free estimate today.

Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch