A Groundwork company - serving San Francisco, CA

CGI Driveway & Pavers in San Francisco, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Driveway & Pavers: The San Francisco Owner’s Guide

CGI-compatible paver driveways in San Francisco typically install for $8,260 to $21,240, and concrete driveway installation runs $5,310 to $14,160; most jobs schedule within a week of your free estimate, not the same day. Groundwork Construction Co. of San Francisco is an independent service provider, not affiliated with CGI. Owners usually notice the problem at the worst possible moment: a rut that fills with water after a storm, a paver that rocks underfoot by the garage door, or joint sand washing down the sloped part of the drive every winter. Once one paver lifts, the base beneath it has almost always already failed.

Call (866) 320-2646

Which CGI Models This Applies To

CGI paver systems come in interlocking, structural-grid, and permeable lines, and each survives differently in our weather. Match the paver by measuring face dimensions and depth (thickness varies by series) and by the interlock profile you can see on the underside. The hard part here is not the brand name; it is that San Francisco sits in a seismic and microclimate zone where a drive exposed to Twin Peaks fog and sideways rain performs nothing like one under the Potrero Hill sun. Get the series right and the base spec wrong and the pavers will heave anyway.

On the OEM-versus-aftermarket call: for fade-critical colors, order the original CGI series so patches match. For base aggregate, edge restraints, and joint sand, a quality domestic equivalent is the smarter buy, and we source those directly rather than through a matching-product markup. Our technicians have up to 12 years of experience matching paver series to existing runs, and they read the labels and measure before quoting anything. We claim no parts stock and carry nothing on a truck; everything is ordered to your specific drive.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Driveway & Pavers Is Failing

  • Pavers rocking or pumping when you step on them. The bedding layer has washed out beneath the unit, usually from water finding a low spot the original install never addressed.
  • Joint sand gone after one rainy season. Rains push sand downhill on sloped drives, so the joints open and the pavers shift. SF’s winter totals and clay-heavy soil make this show up faster than in dry inland markets.
  • Weeds coming up through the joints. Sand loss lets soil wash in; the weeds are a symptom, not the root cause, and pulling them makes the gaps worse.
  • Sunken or heaved sections near the garage or street apron. Base compaction failed, or tree roots pushed the subgrade up. Either way the surface tells you the subbase is the issue.
  • Pooling water that lingers 24 hours after rain. Drainage is off or the drive is pitched wrong. Longstanding water accelerates settlement and speeds the next failure.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here is what a San Francisco drive actually runs, installed, in this market:

Service Installed range
Paver driveway installation $8,260 – $21,240
Concrete driveway installation $5,310 – $14,160
Asphalt driveway paving $4,130 – $10,620
Driveway replacement $5,900 – $16,520
Driveway sealing $295 – $825
Paver patio installation $4,130 – $12,980

What drives the number: square footage, slope, whether the base gets fully rebuilt or a section is patched, edging and curb work, and access. A narrow San Francisco lot with limited equipment access costs more than an open drive. Our quotes are line-item, upfront, and the number you see is the number you pay. The work is covered by the 730-Day Done Right Promise; if it’s not done right, we make it right.

DIY or Call Us?

Some checking is safe and useful. You can look for settlement, note where water pools and how long it stays, photograph the joint profile, and record face measurements before you talk to anyone. What belongs with us is the rebuild: lifting and relaying pavers, re-compacting base, and reinstalling edge restraints where the slope or subgrade is failing. Done wrong, a patch looks right for one season and pulls the surrounding pavers loose the next. If a paver line is edge-restrained and holding, that is one kind of repair; if the base is moving, it’s another job entirely. Call (866) 320-2646 and we’ll tell you which one you’re looking at.

FAQs

How long does a CGI paver system last in San Francisco? Twenty to thirty years when the base is built to spec, shorter where base and drainage were skipped. Our fog belt and clay soil punish a weak subbase faster than the pavers themselves fail.

Can CGI pavers be repaired instead of fully replaced? Yes, when the failure is localized and the base beneath the affected section survived. We lift, rebuild the base, and relay, matching the series so the patch reads as the original.

How long does the swap or repair take? A section repair is often done in a single visit; a full paver drive rebuild typically takes several days depending on square footage, access, and weather. We’ll give you the schedule in writing with the quote.

How do you source the part? We match your CGI series, order the pavers directly, and pull the correct base aggregate, edging, and joint sand to spec. No parts sit in our yard; everything is ordered for your job.

Ready for a straight answer on your drive? Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate. Calls are answered by a live person, 24/7, and the quote is upfront with no surprises. We also work with KraftMaid, Cambria, and Silestone across other projects in San Francisco.

Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch