Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Home Additions & ADU: The San Francisco Owner’s Guide
We build CGI-compatible home additions and ADUs in San Francisco, and most of these projects land between $53,100 and $153,400 for an addition and $106,200 to $259,600 for a full ADU, depending on footprint, foundation, and finishes. An ADU is a ground-up build, so no one delivers one same day – what we do is give you a written line-item quote, pull the permits, and pass inspection. Owners usually start calling when a garage conversion stalls mid-permit at San Francisco Planning, when a 1950s Sunset bungalow turns out to need a foundation upgrade nobody priced, or when a “turnkey” ADU bid quietly excluded utility trenching and sewer work. That’s where the real conversation begins.
Key Takeaways
- CGI-compatible additions in San Francisco typically run $53,100 to $153,400; detached ADUs run $106,200 to $259,600.
- The biggest cost driver is what your lot already has – foundation, sewer lateral, and utility runs, not the finish level.
- Permits and inspections are part of the scope. We pull them. We don’t hand them back to you.
- Every project is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Which CGI Models This Applies To
CGI framing, panel, and modular systems show up in San Francisco additions across several product families – engineered wall and panel packages, roof truss systems, and pre-engineered structural components. What matters more than the model name is the specification sheet for your exact package: panel series, span rating, and the load design stamped on the drawings. Before we quote anything, we pull the spec label or the original permit set from San Francisco Department of Building Inspection records and match it against what’s on site. Owners routinely discover the plans on file don’t match the framing that was actually installed.
On sourcing: we don’t stock CGI parts, and we don’t carry parts on a truck. We order against your spec once the drawings are confirmed, and we compare OEM components with tested equivalents where a direct match isn’t available – the same approach we use for KraftMaid, Cambria, and Silestone selections elsewhere in a build. For a load-bearing component, the equivalent has to carry the engineering, not just fit the opening. That’s the gotcha: a panel that measures right but lacks the span rating on your stamped drawings will fail inspection.
We’re an independent builder and not affiliated with CGI. We work with their systems and other pre-engineered packages the same way.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Home Additions & ADU Is Failing
- Hairline cracks spreading from panel joints. Often a sign the structure is moving under loads it wasn’t designed for – framing that wasn’t shimmed or anchored to spec. Small cracks that keep widening over a few seasons are worth a professional look.
- Sticking doors and windows in the new space. That’s usually settlement or moisture-driven movement in the framing, not a door problem. In a foggy Outer Richmond winter, we see it appear faster than owners expect.
- Soft spots or staining along the roof-to-wall connection. Water finding its way past flashing at the junction where the addition meets the original house. This is the most common call we get in San Francisco after a wet season.
- Visible gaps at the sill plate or foundation line. Could be anchor-bolt spacing that didn’t meet the drawings, or soil movement under a shallow foundation on fill. Worth a structural review before anything cosmetic gets patched.
- Permit or inspection paperwork that doesn’t line up. Plans on file that don’t match framing on site, or work done without a permit. This surfaces at resale and can stall a sale outright.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for CGI-compatible additions and ADUs in San Francisco, with parts and labor broken out in your written quote:
| Project | Installed Range (San Francisco) |
|---|---|
| Home Addition | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
What drives the range: soil and foundation requirements on your specific lot, sewer lateral and utility runs, whether the design stays within the existing footprint, and finish level. The number you see is the number you pay – upfront pricing, no surprises, no change orders after we’ve walked the site. Permits, inspections, and disposal are in the scope, not add-ons. And all of it is backed by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. Our technicians have up to 12 years of experience.
DIY or Call Us?
An owner can safely pull the permit history, photograph the spec labels, document cracks and water staining with a ruler for scale, and check gutters and drainage around the new structure. That’s it for a structurally significant part.
Where DIY goes wrong: load-bearing framing, foundation work, and any change to a stamped structural assembly. Getting the span rating or anchor spacing wrong doesn’t show up until inspection, or until the wall moves two winters later. This is genuine structural work on a load path – treat it that way.
If something looks off, call (866) 320-2646. A live person answers at any hour, so you’re not waiting until Monday morning to learn whether your addition is safe to keep using.
FAQs
A properly built and maintained addition should hold up for decades – the structure itself isn’t the weak point. What shortens lifespan in San Francisco is moisture: flashing failures at the roof tie-in, poor drainage, and constant bay-area fog working on seams. Done right, a CGI-compatible addition will outlast most of the finish materials inside it.
Often yes – small settlement cracks, flashing, and trim can be repaired rather than rebuilt. Structural movement under load is a different matter and needs an engineering review before anyone patches over it. Call (866) 320-2646 for a free estimate; we’ll tell you honestly which situation you’re in.
Most additions run several months and full ADUs run longer – this is planned construction, not a same-day swap. The timeline depends on permit turnaround at San Francisco DBI and Planning, foundation complexity, and inspections. We give you a realistic schedule in the written quote, not a promise we can’t keep.
We order against your confirmed spec sheet and original drawings once we’ve verified what’s on site, comparing OEM components with tested equivalents that carry the required engineering. Nothing is pulled from local stock or a truck – it’s matched to your exact assembly. Call (866) 320-2646 to schedule your free estimate, and we’ll walk the site and confirm the spec with you.
Call (866) 320-2646 for a free estimate on your CGI-compatible addition or ADU in San Francisco. We answer live at any hour, quote in writing line by line, and back the work with the 730-Day Done Right Promise – built to last, backed in writing. We also work with KraftMaid, Cambria, and Silestone on the interiors of these projects, and we can bring 0% financing for 18 months plus $1,000 off projects over $10,000 to the table when you’re ready. From foundation to finish line, one contractor, one number.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.