A Groundwork company - serving San Francisco, CA
Groundwork Construction Co. of San Francisco construction team

Driveway & Pavers in Mill Valley - Free On-Site Measure, Price Per Square Foot

Free on-site measure and a written price per square foot before we book you in. Proper base preparation and sealed edges, because a cheap base is why driveways crack.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Construction in Mill Valley, CA

Windows and doors are the first thing most Mill Valley homeowners call us about, and for good reason: a 1950s ranch on a hillside loses heat through single-pane glass and lets in the wind that funnels up the canyons. Old redwood and shingle cottages near downtown have the same weak spots. Then there’s the rain. Marin’s wet winters find every gap in a frame, and wildfire rules now push homeowners toward ember-resistant vents and tempered glass. Getting the envelope right in Mill Valley means treating each home as its own site problem: slope, sun exposure, tree cover, and neighborhood design review. Call (866) 320-2646 and we’ll walk the property with you.

Call (866) 320-2646

Why Mill Valley Homes Are Different

Mill Valley sits in a bowl of redwood-covered ridges, and that geography shows up in every project. Steep hillside lots mean narrow, single-lane access; on many streets there’s no turnaround, so material deliveries and staging have to be planned for pre-dawn windows with a spotter. The housing stock is just as varied: early-1900s redwood and shingle cottages close to downtown, 1950s through 1970s ranch and split-level homes up on the hillsides, and modern architect-designed rebuilds scattered between. Plenty of those older homes carry unpermitted past additions and redwood decks cantilevered over slopes, and both usually need seismic and drainage work before anything else can proceed.

The climate adds another layer. Wet winters and long dry summers drive intense seasonal rainfall and hillside runoff, while high wildfire-risk exposure pushes roof assemblies, decking, and exterior materials toward fire-resistant ratings and ember-resistant details. Mill Valley’s discretionary design-review process means even a modest remodel can trigger site-specific engineering and a longer permitting path. Nothing here is off-the-shelf, and neighbors notice everything, which is why a clean plan and a written scope matter more on these streets than almost anywhere in Marin.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Our Main Mill Valley Services

Two services come up most often when Mill Valley homeowners call: bringing the building envelope up to what the weather and fire rules now demand, and reworking the outdoor spaces that sit on these tight, sloped lots. Each has its own dedicated page.

Driveway & Pavers in Mill Valley

Hillside driveways here have to shed water fast and hold up under runoff that gathers from properties above. Paver installation on a sloped Mill Valley lot is as much about base preparation, subgrade drainage, and edge restraints as it is about the surface, and we plan for how winter rain will move across the slab. Narrow approaches and tight turnarounds shape how the job is staged and where materials can sit. Start with the Driveway & Pavers in Mill Valley page for the details on grading, drainage, and what a project looks like on your street.

Driveway & Pavers in Mill Valley

Fence Installation in Mill Valley

Fences in Mill Valley do double duty: privacy on lots that sit close together, and a defensible-space role where wildfire prevention rules ask for non-combustible materials on some properties. Posts on a slope need deeper footings and careful layout so the panels follow grade instead of stepping awkwardly. Tree roots, tight property lines, and neighbors who care about sightlines all factor into the plan. The Fence Installation in Mill Valley page covers material choices, slope handling, and how we set posts to hold through wet winters.

Fence Installation in Mill Valley

Home Additions & ADU in Mill Valley

Adding square footage on a hillside lot is a site-specific engineering puzzle. Older foundations and cantilevered decks often need seismic upgrades before a new wing can tie in, and runoff from uphill has to be redirected around the addition. Mill Valley’s design-review process also means the early drawings need to anticipate what the city will ask for. We plan the sequence so the structure, drainage, and permits move together instead of one stalling the other. See Home Additions & ADU in Mill Valley for how the process works here.

Home Additions & ADU in Mill Valley

Bathroom Remodeling in Mill Valley

A Mill Valley bathroom remodel usually starts with the same problem: decades-old plumbing and ventilation that were sized for a different era. In older redwood and shingle homes near downtown, walls hide surprises once they’re opened, and hillside homes need moisture control that stands up to humid winters. We plan tile, waterproofing, and venting together so the finished room stays dry. The Bathroom Remodeling in Mill Valley page breaks down scope, timelines, and what typically surfaces on these homes.

Kitchen Remodeling in Mill Valley

Kitchen work in Mill Valley runs into tight footprints and older framing, especially in the 1950s and 1970s homes where the original layout was never generous. Slope-side kitchens also fight condensation and need ventilation that actually pulls moisture out. We plan cabinet runs, appliance placement, and lighting around the space you have rather than forcing a stock layout into it. Head to Kitchen Remodeling in Mill Valley for the full picture on cabinets, counters, and how we sequence the work inside an occupied home.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 320-2646

Windows & Doors in Mill Valley

Windows and doors are where a Mill Valley home feels the difference first. In the early-1900s cottages and the 1950s-70s hillside ranches, single-pane glass and aging frames leak heat and admit wind, and wet winters work their way into every seam. Our Windows & Doors work on these homes starts with the building envelope: pick the right frame, glass, and sealing, and the home gets quieter, drier, and more fire-ready. Because Mill Valley properties range from redwood cottages to architect-designed rebuilds, the right product differs from house to house.

Window Installation

Signs you need it

Drafts at the frame, fog between the panes, or windows that stick through wet months usually point to installation issues or a unit that’s reached the end of its life.

What it costs in Mill Valley

Window installation here typically runs $4,500 to $15,000 for a whole-home project, with impact-rated units at $8,000 to $25,000.

How we do it

We measure openings, correct any framing or flashing issues, set the units with proper shimming and weather sealing, then finish interior and exterior trim to close the envelope.

Impact Windows & Doors

Signs you need it

Homes with large expanses of older glass facing wildfire exposure or hillside wind should consider impact-rated units that also resist breakage and heat.

What it costs in Mill Valley

Expect $8,000 to $25,000 for impact window installation on a typical Mill Valley home.

How we do it

We confirm the required rating for your property, order matching frames and tempered glazing, install them with fire-resistant sealing details, then verify operation and finish.

What Windows & Doors Costs in Mill Valley

Item Typical range in Mill Valley
Window replacement (whole home) $4,500 – $15,000
Impact window installation $8,000 – $25,000
Individual window or door unit Quoted per opening after an on-site measure

Do Mill Valley homes need impact-rated windows?

Often, yes. High wildfire-risk exposure in Mill Valley pushes many properties toward ember-resistant details and tempered glazing. An on-site evaluation tells us what your specific lot and exposure call for before you commit.

Can you replace windows on a hillside home without major staging trouble?

Yes, with planning. Narrow lanes mean we time deliveries and set a spotter, and interior work can be sequenced room by room so the house stays livable. Call (866) 320-2646 and we’ll map out access first.

Roofing in Mill Valley

Roofs in Mill Valley take a beating: long dry summers cook the surface, then wet winters push rainfall against aging flashing and underlayment. On the 1950s-70s hillside ranches and the older cottages near downtown, worn roof assemblies are the most common source of interior leaks, and fire-resistant ratings now matter as much as water shedding. Our Roofing work starts with an honest look at what’s overhead and what the house actually needs.

Roof Replacement & Installation

Signs you need it

Curling or missing shingles, granules in the gutters, and daylight in the attic mean the assembly has likely reached the end of its service life.

What it costs in Mill Valley

A full roof replacement here typically runs $8,000 to $20,000 depending on size, pitch, and material.

How we do it

We strip the old assembly, inspect and repair the deck, then install new underlayment, flashing, and fire-rated shingles with proper ridge and eave ventilation.

Roof Repair

Signs you need it

A single ceiling stain, a lifted flashing detail, or a valley that drips during the first heavy rain usually calls for a targeted repair rather than a full replacement.

What it costs in Mill Valley

Roof repair in Mill Valley generally falls between $400 and $1,800, and tile repair runs $600 to $2,500.

How we do it

We trace the leak to its source, correct the flashing or damaged surface, and re-seal the assembly so the fix holds through the next wet season.

What Roofing Costs in Mill Valley

Item Typical range in Mill Valley
Roof replacement $8,000 – $20,000
Roof repair $400 – $1,800
Tile roof repair $600 – $2,500

How long does a roof replacement take in Mill Valley?

Most single-family roof replacements finish in a few days once materials are on site. Tight hillside access and weather windows can add time, so we build that into the schedule from the start.

Do Mill Valley roofs need fire-resistant materials?

High wildfire-risk exposure across many Mill Valley properties makes fire-rated roofing the practical choice. We’ll walk you through the ratings that suit your home and your lot before work begins.

Brands We Service in Mill Valley

We work with a curated set of top-tier brands on Mill Valley projects, including ECO Window Systems, Therma-Tru, and ViewLux for windows and doors. We don’t stock parts locally, so turnaround depends on product lead times confirmed at estimate. See our brands for the full partner list.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Construction in Mill Valley, CA

Service Typical range in Mill Valley
Window replacement $4,500 – $15,000
Impact window installation $8,000 – $25,000
Roof replacement $8,000 – $20,000
Roof repair $400 – $1,800
Tile roof repair $600 – $2,500
Metal roof installation $15,000 – $40,000
Bathroom remodel $9,000 – $28,000
Kitchen remodel $14,000 – $45,000
Paver driveway installation $7,000 – $18,000
ADU construction $90,000 – $220,000

Price in Mill Valley is driven by access and terrain as much as materials: single-lane hillside roads, pre-dawn delivery windows, and seismic or drainage work exposed after demo all move the number. We price upfront and in writing, so the number you see is the number you pay.

Neighborhoods We Serve in Mill Valley

We work throughout Mill Valley’s 94941 and 94942 ZIP codes, from downtown to the hillside streets above. Access and scheduling are set once we’ve seen your lot, and most Mill Valley requests get a response within one business day.

  • Downtown Mill Valley and the surrounding cottage blocks
  • Hillside streets and slope-side ranches
  • Homes along the canyon and ridge roads above town
  • Properties near the redwood preserves

Service Area – Cities Near Mill Valley

Mill Valley sits close to several neighboring communities we also serve. If your property is just over a ridge or down the highway, ask about coverage when you call. We work in Tamalpais-Homestead Valley, CA, Corte Madera, CA, Larkspur, CA, and Tiburon, CA, with the same approach to site planning and written pricing we bring to Mill Valley jobs.

Serving Mill Valley, CA – Our Local Coverage Area

We serve Mill Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Construction in Mill Valley

Ready to get started? Free estimates in Mill Valley
Call (866) 320-2646

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local construction pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Mill Valley Customers Say

★★★★★ 5.0 from 5+ reviews

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

- Marco Castillo

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

- Angela Wong

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

- Robert Sullivan

How It Works in Mill Valley

Getting your construction project started is simple.

1

Call or Request a Free Estimate

Tell us about your construction project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Mill Valley. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch