Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Windows & Doors: The San Francisco Owner’s Guide
We install and service ECO Window Systems windows and doors for San Francisco homeowners, and most full window replacements land between $5,310 and $17,700 installed, while impact-rated units run $9,440 to $29,500. Same-day work is available for service calls on failing hardware; full replacements are scheduled. You usually find out something’s wrong one of two ways: a window that won’t seal tight against the fog and wind off the Pacific, or a door that drags, sticks, or lets a whistle of cold air through the frame in January.
Groundwork Construction Co. of San Francisco is an independent service provider. We’re not affiliated with ECO Window Systems, and we don’t claim to be. What we do is match the right part to your unit, install it correctly, and stand behind it. That distinction matters when you’re hunting down a specific component for a specific model.
Key Takeaways
- Most ECO Window Systems replacement work in San Francisco falls in the $5,310 to $17,700 range for standard units.
- Part compatibility depends on the series and the date stamp on the frame label, not the model name alone.
- Salt air and constant marine moisture are the two biggest causes of hardware failure here.
- Our technicians have up to 12 years of experience, and every job carries the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Which ECO Window Systems Models This Applies To
ECO Window Systems builds a range of vinyl and aluminum window and door lines, and the part you need depends on which series your unit came from. The first place to look is the certification label on the frame or sash; it carries a series or product code and, in most cases, a manufacture date. That date matters because manufacturers quietly revise hardware: a lock, roller, or weatherstrip profile from an early run may not fit a later one, even under the same product family name.
Next, measure. Sash dimensions, glass thickness, and the exact profile of a seal or sweep are what actually determine fit. Guessing from a photo of a worn part is how homeowners end up ordering twice.
On the OEM-versus-aftermarket question: for lock mechanisms and hinges, genuine ECO Window Systems parts are the safer bet because tolerances are tight. For weatherstripping, sweeps, and rollers, quality aftermarket equivalents are often just as good and easier to source. We’ll tell you honestly which category your part falls into.
Signs Your ECO Window Systems Windows & Doors Is Failing
- Condensation between the panes. A failed seal lets moisture into the insulated glass unit. In San Francisco’s damp air, this shows up fast and means the glass assembly needs replacing, not just cleaning.
- A door that drags or won’t latch. Usually a worn roller, a sagging hinge, or a shifted strike plate. Left alone, the misalignment stresses the frame and the problem spreads.
- Drafts and whistling around the frame. Failed weatherstripping or a worn sweep. Common on west-facing units that take the full force of ocean wind and fog.
- Sticking window sashes. Often a corroded balance or track packed with grime and salt residue. Coastal San Francisco homes see this more than inland ones.
- Fogged glass or a cloudy film that won’t wipe off. A compromised low-E coating or a seal that’s already gone. This is a glass-unit replacement, and it affects energy performance immediately.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what San Francisco homeowners typically pay, installed:
| Work | Installed Price Range |
|---|---|
| Standard window replacement | $5,310 – $17,700 |
| Impact window installation | $9,440 – $29,500 |
The range comes down to three things: unit size, glass type, and whether the frame stays or gets rebuilt. A single small sash swap sits at the low end; a full-frame replacement of a large unit with impact glass sits at the top. We quote parts and labor as separate line items so you can see exactly what you’re paying for, and the number you see is the number you pay. All work is covered by our 730-Day Done Right Promise, and if it’s not done right, we make it right. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months.
DIY or Call Us?
Some checks are safe for any homeowner. You can inspect the frame label, measure your sash, wipe down tracks, and test whether a lock or latch is actually engaging. That’s diagnostic work, and it helps.
Where DIY goes wrong: glass units and full-frame replacements involve handling heavy, brittle assemblies and getting the seal and flashing right. A poorly seated unit leaks, and in San Francisco’s wet winters a leak turns into rot behind the wall. Impact-rated glass is heavier still. This isn’t a place to learn on the job.
For that level of work, call a trained professional. If you’re unsure which category your job falls into, call us at (866) 320-2646 and we’ll help you figure it out. Estimates are free.
FAQs
Most quality units last 20 to 30 years, but coastal San Francisco conditions shorten hardware life. Salt air and constant moisture wear out locks, rollers, and weatherstripping before the glass fails, so expect hardware service sooner than you would inland. Call (866) 320-2646 for an exact quote on your unit.
Often, yes. Worn rollers, sweeps, weatherstripping, and lock hardware can usually be swapped without touching the frame or glass. A fogged glass unit cannot be repaired; the assembly has to be replaced. We’ll tell you which situation you’re in before any work starts.
A hardware or weatherstrip swap is typically a single-visit job. A full window or door replacement usually takes longer depending on unit count and whether the frame is being rebuilt. We’ll give you a clear timeline with your written quote.
We match your unit using the frame label, the series code, and precise measurements, not guesswork. For tight-tolerance parts like locks and hinges we go OEM; for weatherstripping and rollers we source quality equivalents where they perform the same. Call (866) 320-2646 and we’ll confirm what your unit needs.
We also work with KraftMaid, Cambria, and Silestone on other projects, but for your windows and doors, ECO Window Systems parts and our install team are what matter here.
If your windows or doors are letting in San Francisco’s fog, wind, or damp, don’t wait for the damage to spread. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate. A live person answers 24/7, our technicians are background-checked and arrive in uniform, and every job is backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.