A Groundwork company - serving San Francisco, CA
M

Mr-Glass Home Additions & ADU in San Francisco, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Home Additions & ADU: The San Francisco Owner’s Guide

Home additions and ADU work in San Francisco covered with Mr-Glass-compatible materials and systems typically runs $53,100 – $153,400 installed, and we schedule the work in planned phases rather than same-day dispatches. You’re usually reading this page because a door, window, or glazed wall unit in your addition or ADU has started to fail: a sash that won’t seat, fog between panes, water tracking at a sill, or a latch that no longer lines up. Those are the first signals that the Mr-Glass system in your build has moved past its service life or was installed without the flashing and drainage detail San Francisco’s fog belt demands.

Call (866) 320-2646

Key Takeaways

  • Mr-Glass parts fail predictably in San Francisco’s marine air; the fix is usually a component swap, not a rebuild.
  • Spot the failure early with a five-minute check of seals, sashes, and hardware before water reaches the framing.
  • We’re an independent San Francisco provider, not affiliated with Mr-Glass, and we source compatible parts by model and measurement.
  • Every project we complete is covered by our 730-Day Done Right Promise.

Which Mr-Glass Models This Applies To

Mr-Glass produced several series lines of glazed door and window systems over the years, and the part that fits one line often won’t fit another. The fastest way to identify yours is to find the manufacturer’s label on the frame edge or the glass spacer – it usually carries a series code and a rough-opening dimension. Write down both. If the label is gone, measure the visible glass width and height to the nearest 1/16 inch and note the hinge or roller configuration on doors.

The OEM-versus-aftermarket call is where owners get stuck. An original Mr-Glass part carries an exact fit but often a long lead time and a premium. A quality aftermarket equivalent – matched on dimension, glazing spec, and hardware pattern – can deliver the same performance for less, provided it’s rated for the marine exposure. For additions and ADUs, that rating matters: San Francisco sits in a coastal fog zone where salt-laden moisture attacks seals and hardware faster than inland markets. We confirm the series, verify the glazing and finish spec against the exposure, and only then quote. No part is ordered blind.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Home Additions & ADU Is Failing

Most San Francisco owners call us after they’ve watched a problem worsen over a wet season. These are the symptoms that point to a specific failing component.

  • Fogging or condensation between the panes. The sealed glazing unit has lost its argon fill and moisture barrier – a common outcome after years of thermal cycling in coastal air. Left alone, the seal keeps degrading and the view keeps clouding.
  • Water tracking at the sill or threshold. Failed flashing, a clogged weep channel, or a compressed weather seal lets fog-belt moisture reach the framing. This is the one to act on fast, because wet framing leads to rot and mold.
  • A sash or door that won’t seat or latch. Settled hardware, a worn hinge, or a roller that’s dropped means the unit is no longer square in its opening. The gap lets air and water in.
  • Drafts or a cold spot along the frame. Weatherstripping and gaskets harden and crack in the marine climate, breaking the seal even on a unit that otherwise looks fine.
  • Visible corrosion on hardware or tracks. Salt air eats through cheap finishes and even some coated metals. Pitting and sticking tracks mean the hardware is past its service life.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For San Francisco, plan on the following installed ranges for the pieces that most often fail in a Mr-Glass addition or ADU. These are pulled from our standing local pricing so the numbers you read here match what we quote:

  • Window Replacement: $5,310 – $17,700, the most common swap when glazing or seals fail.
  • Impact Window Installation: $9,440 – $29,500, for owners upgrading to a higher-performance spec.
  • Garage Conversion: $35,400 – $94,400, when the failed unit sits in a converted accessory space.
  • ADU Construction: $106,200 – $259,600, full scope for a new or rebuilt accessory dwelling.
  • Home Addition: $53,100 – $153,400, whole-addition framing-to-finish work.

What drives the range on a parts swap: the size and count of the units, the glazing spec you choose, the condition of the surrounding flashing and framing, and whether the opening needs reframing to accept the replacement. We quote parts and labor as separate line items so you see exactly what the material costs and what the install costs – upfront pricing, no surprises. Every job is backed by our 730-Day Done Right Promise, and if it’s not done right, we make it right.

DIY or Call Us?

You can safely do a few things yourself: measure the opening, photograph the model label, clear debris from a weep channel, and note where water or air is getting in. That information helps us quote accurately. What we’d steer you away from is pulling a sealed glazing unit, resetting a door that’s out of square, or re-flashing an opening on your own. Those go wrong quietly – a bad re-flash leaks for months before you see it, and by then the framing and insulation are wet. On a San Francisco addition or ADU, water intrusion is the expensive mistake. For anything beyond a visual check, call us at (866) 320-2646 to schedule a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch