Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Roofing: The San Francisco Owner’s Guide
Therma-Tru-compatible roofing components in San Francisco typically run $470 – $2,125 for repair work and $9,440 – $23,600 for a full roof replacement, depending on the assembly involved and how much of the deck has to be rebuilt. We install and service Therma-Tru-compatible roofing systems across the city, and we’re an independent contractor, not affiliated with Therma-Tru. Most owners discover a failed component the same way: a stain spreading on the ceiling after a storm, or a flush channel that stops draining and starts backing water up under the membrane during the first real rain of the season.
Which Therma-Tru Models This Applies To
Therma-Tru’s roofing and drainage accessories are most often paired with their flush-mount and surface-mount threshold systems, and the parts are not universal across product families. The failure point is almost always a piece matched to the wrong series. A threshold and flashing kit built for one door family will not seat correctly on another, and the mismatch shows up months later as a slow leak rather than an obvious gap.
The reliable way to identify the right part is with the label inside the door’s hinge jamb, which lists the model and series. Match that label to the part number before you measure anything. If the label is gone, bring the failed piece into the shop or photograph it against a tape measure; the extrusion profile, drain slot spacing, and mounting hole pattern all identify the generation. We’ve seen two parts that looked identical in a catalog but had drain slots 1/8 inch apart, which was enough to cause pooling.
On the OEM-versus-aftermarket decision: Therma-Tru’s own replacement components fit correctly out of the box, and for a roof assembly where a leak is the outcome of a bad fit, that matters. Quality aftermarket equivalents can work, but only when you can confirm the part number cross-reference. If you can’t confirm it, don’t guess. Call (866) 320-2646 and we’ll help you match the label to the right part before you order anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Roofing Is Failing
- Water staining on the ceiling below the door or roof assembly. This is the classic first sign. A failed flush channel or degraded seal lets water track along the framing instead of draining outward, and the stain appears well away from the actual leak.
- Ponding water in the threshold or channel after rain. When the drain slots clog or the part deforms, water sits instead of shedding. In San Francisco’s wet winters, a channel that holds water for even a day is already degrading the seal beneath it.
- Lifted or bubbling roofing membrane near the assembly. Trapped moisture under the membrane causes it to bubble and pull away from the deck. This is a sign the flashing detail failed, not that the membrane itself is bad.
- Visible corrosion or cracking on metal flashings and trim. Salt air from the ocean and the marine layer accelerate corrosion on uncoated metal parts. What looks like cosmetic rust is often a pinhole leak waiting to open up.
- Drafts or daylight around the door head where it meets the roof line. A shrunken or cracked seal at the head flashing lets air and water in at the same time. By the time you feel a draft, water has usually already found the path.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Roof repair in San Francisco runs $470 – $2,125 for the affected assembly, and tile roof repair falls in the $710 – $2,950 range when matching tile has to be sourced. If the failure has reached the deck and multiple layers have to come off, a roof replacement runs $9,440 – $23,600. Metal roof installation, if you’re upgrading the assembly rather than repairing it, runs $17,700 – $47,200.
What drives the number: how much membrane or tile has to be removed to reach the failed part, whether the deck underneath is sound, and whether matching materials are available for the existing roof. We quote line-item so you see the part cost and the labor separately, and the number you see is the number you pay. The work is covered by our 730-Day Done Right Promise, backed in writing. All of this starts with a free estimate; we’ll price the exact scope before anyone touches the roof.
DIY or Call Us?
You can safely check a few things yourself: look for ceiling stains after a storm, clear visible debris from a surface drain channel, and photograph the model label inside the hinge jamb so you have it ready. What you should not do is climb onto the roof to pry up membrane or flashing to inspect a failed seal. Roof work at height is where serious falls happen, and prying a flashing loose on a wet San Francisco roof can turn a small leak into a full deck repair. A failed seal or flashing detail should be handled by a trained professional who can get above it safely and reseal it correctly.
If you’ve found a stain, a ponding channel, or a label you can’t match, call us at (866) 320-2646. We answer live, 24/7, and we’ll tell you honestly whether it’s a repair or a replacement.
FAQs
A correctly installed and sealed assembly typically lasts 15 to 25 years, but salt air and the marine layer shorten that on exposed metal parts. Inspect flashings and drainage channels annually; corrosion on uncoated trim is the most common early failure here. Call (866) 320-2646 for a free inspection estimate.
Often yes. A clogged drain channel or a degraded seal can usually be cleared and resealed at the repair price range, and only a cracked or deformed part needs a full swap. We’ll tell you which one you’re looking at before quoting. Estimates are free.
Most single-part repairs are completed in a single visit. If the failure has reached the membrane or deck, the job runs longer depending on how much has to be removed and replaced. Call (866) 320-2646 and we’ll give you a realistic timeline with the quote.
We match the model and series from the hinge-jamb label to the correct part number, so the fit is right the first time. If the label is missing, we identify the part by its extrusion profile and mounting pattern. Call (866) 320-2646 to start the match.
Whether your Therma-Tru assembly needs a repair or a full replacement, we’ll give you a straight, itemized number and stand behind it with the 730-Day Done Right Promise. We also handle KraftMaid, Cambria, and Silestone work across other trades. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate, and we’ll get a trained technician out to look at your San Francisco roof.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.