A Groundwork company - serving San Francisco, CA
T

Therma-Tru Driveway & Pavers in San Francisco, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Driveway & Pavers: The San Francisco Owner’s Guide

We install Therma-Tru-compatible driveway and paver systems, and a typical replacement runs $8,260 – $21,240 for paver driveway installation depending on square footage, base prep, and drainage. Most of this work is planned over a few days, not squeezed into one, because San Francisco’s hillside grade and clay-heavy soils demand proper excavation before anything gets set. Owners usually discover a failing paver system the same way: water pooling against the foundation after a storm, a lip catching a car tire at the curb cut, or a rut that reopens a month after the last patch job.

Call (866) 320-2646

Which Therma-Tru Models This Applies To

Therma-Tru’s driveway and pavers line covers a range of paver styles, and the product family has evolved across model lines. The catch most San Francisco homeowners hit: pavers installed in the 1990s and early 2000s often use a slightly different nominal dimension than current generations, so a replacement paver that “looks right” may sit proud or short against the existing field. If you’re matching against an older installation, measure a full paver corner to corner with a tape, then check the thickness (typically 2-3/8″ or 3-1/8″ for standard units). Current Therma-Tru pavers are generally compatible with newer base systems and modular layouts. On OEM versus aftermarket: OEM pavers from Therma-Tru’s authorized channel are the safe call when color matching matters, but equivalent units from a reputable aftermarket supplier are fine when you’re rebuilding an entire field or grading a new section. We don’t stock parts or carry inventory on trucks; we source what your project actually needs.

Groundwork Construction Co. of San Francisco is an independent service provider and not affiliated with Therma-Tru. We also work with KraftMaid, Cambria, and Silestone across our other service lines.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Driveway & Pavers Is Failing

  • Water pooling against the garage or foundation. In San Francisco’s hillside neighborhoods, this usually traces to a base that settled or a paver field that lost cross-slope. Water finding a new path is the first warning most owners catch.
  • Pavers popping, rocking, or lifting at the edges. That’s base failure, not a paver problem. Once the bedding sand washes out and fines migrate, individual units start to work loose under a car tire.
  • Repeating weeds in the joints. If you’re pulling the same joints every spring, the polymeric sand has broken down or the joint width opened up. Bare sand joints invite seed and moisture in.
  • Cracked or chipped pavers from freeze-thaw or root heave. Mature street trees are the usual culprit in San Francisco. A single crack is a repair; a trailing crack line across the field means the base is moving.
  • Uneven grade at the street or driveway apron. A lip at the curb or a dip at the garage threshold creates safety and drainage trouble at once. This is where most “just seal it” advice quietly fails.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Replacement pricing in San Francisco depends on area, base conditions, drainage corrections, and whether you’re matching existing pavers or rebuilding a section. Our current ranges:

  • Paver driveway installation: $8,260 – $21,240
  • Concrete driveway installation: $5,310 – $14,160
  • Asphalt driveway paving: $4,130 – $10,620
  • Driveway replacement: $5,900 – $16,520
  • Driveway sealing: $295 – $825

Every quote is line-item: excavation, base gravel, compaction, bedding sand, pavers, edge restraint, and polymeric joint sand get priced separately, so you see exactly where the money goes. No change orders just to finish the job. All work is covered by our 730-Day Done Right Promise; if it’s not done right, we make it right.

DIY or Call Us?

What you can safely check yourself: pull up a loose paver and look at the base. If the sand is gone or the gravel is mud, the problem is underneath. What we’d caution against is a weekend re-lay of the whole field. Paver driveways carry thousands of pounds of live load, so a shallow base or lost compaction shows up within months, and San Francisco’s wet winters and clay soils punish shortcuts. A few units are fine to reseat and re-sand. Running a wheeled load over a base that isn’t compacted is where it goes wrong. If you’re not sure whether it’s a top-layer or base-layer problem, call us at (866) 320-2646 and we’ll walk the driveway with you. Estimates are free.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch