Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The San Francisco Owner’s Guide
We install Barrette-compatible kitchen remodeling systems in San Francisco, and a typical full kitchen remodel runs $16,520 – $53,100 installed. If you already have a Barrette component that’s failing, matching the exact series and cabinet spec is the whole job, and we can usually confirm fitment and schedule on the same call. Most San Francisco owners discover the problem the same way: a drawer that won’t track straight after years of Pacific humidity, a door hinge that’s started to sag, or a cabinet box that’s pulled away from the wall behind a heavy countertop.
Which Barrette Models This Applies To
Barrette isn’t a single product line, and that’s where most San Francisco homeowners get stuck. The brand appears on cabinet systems, door and drawer components, and interior millwork across several series, and the part that fits one series won’t fit another. Before you order anything, find the model or series label. On Barrette cabinetry it’s usually on the inside of the cabinet box or on the back of a drawer front, not on the visible face.
Measure three things: the cabinet opening width, the drawer box depth, and the hinge bore spacing if you’re matching a door. Those three numbers, plus the series name, tell us whether we’re dealing with an OEM-equivalent part or a quality aftermarket match.
OEM vs aftermarket for Barrette
For Barrette specifically, the OEM decision comes down to age. Current-series components are worth matching exactly, because the tolerances are tight and an off-brand drawer slide will fight the cabinet box. On older series that Barrette has moved past, a quality aftermarket equivalent is often the smarter call, and it’s usually what we recommend. Either way, we quote the part and the labor as separate line items so you can see exactly what you’re paying for.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
- Drawers that stick or jump the track. Worn slide rollers or a bent track cause this. In San Francisco’s damp air, metal slides corrode faster than owners expect.
- Doors that sag or won’t close flush. A fatigued hinge or stripped screw hole is usually the culprit. The door itself is often fine.
- Cabinet boxes pulling from the wall. Heavy stone countertops plus older fasteners lead to this. It’s a structural warning, not cosmetic.
- Swollen or delaminating panels. Moisture wicks into particleboard and MDF near sinks and dishwashers. Once it swells, it won’t shrink back.
- Loose or cracked hinges at the bore. Oversized screws or repeated door slams wallow out the bore hole. A repair insert or new hinge plate fixes it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In San Francisco, cabinet and component work prices out at these installed ranges. The number you see is the number you pay, and every quote is written line by line.
| Work | Installed range (San Francisco) |
|---|---|
| Full kitchen remodel | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What drives the range: cabinet count and box quality, whether countertops are stone or laminate, the condition of the wall and plumbing behind the cabinets, and whether you’re matching an existing series or replacing it. Parts and labor are always shown separately. Every project is covered by our 730-Day Done Right Promise, so if the work isn’t done right, we make it right.
DIY or Call Us?
Some things you can safely check yourself. Confirm the series label, measure the opening and drawer depth, and tighten visible hinge screws. That’s useful information to have on hand when you call.
Where DIY goes wrong: matching a drawer slide to the wrong cabinet box, forcing a swollen panel back into place, or re-anchoring a cabinet that’s pulled from the wall. Those jobs need the right hardware and the right fasteners for the substrate behind it. A bad match on a Barrette series means the part fights the box from day one, and you’re out the cost of the part plus the redo. In San Francisco kitchens, the moisture issue behind sinks and dishwashers is the one we see owners misjudge most often. Call (866) 320-2646 and we’ll confirm fitment before you spend anything.
FAQs
How long do Barrette cabinet components last in San Francisco? Slides and hinges in a San Francisco kitchen typically run 8 to 15 years before corrosion or fatigue shows, and cabinet boxes last far longer if they stay dry. Coastal humidity and sink-area moisture are the two things that shorten that window. Call (866) 320-2646 for an exact replacement quote.
Can the failing part be repaired instead of replaced? Yes, often. A sagging door usually needs a hinge repair, not a new door, and a sticking drawer may just need a track and roller. We’ll tell you honestly which one you’re facing. Call (866) 320-2646 for a free estimate.
How long does the swap take? A single component match, like a drawer slide or hinge set, is often done in a single visit. A full cabinet installation runs longer depending on the count and countertop work. We give you a real timeline with the quote, not a guess. Call (866) 320-2646 for a free estimate.
How do you source the Barrette part? We match by series name and the measurements you provide, then confirm whether an OEM-equivalent or a quality aftermarket part is the right call for your year and model. We don’t carry parts on a truck, so we source to fit, not to what happens to be handy. Call (866) 320-2646 to start.
We’re an independent service provider, not affiliated with Barrette. Alongside Barrette work, we also install and service KraftMaid, Cambria, and Silestone in San Francisco kitchens, and you can see them in our showroom-quality finish work. Ready for a free project estimate and design consult? Call (866) 320-2646 today. Every project is backed by our 730-Day Done Right Promise, and we offer $1,000 off projects over $10,000 plus 0% financing for 18 months.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.