Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Home Additions & ADU: The San Francisco Owner’s Guide
When a Master Halco product tied to your addition or ADU needs replacement, the installed fix in San Francisco typically runs $53,100 – $153,400 for a full addition project and $106,200 – $259,600 for a permitted ADU, with the failed component scoped as a line item inside a written estimate. We’re an independent service provider – not affiliated with Master Halco – and we work with these components as part of a full-scope construction plan. Most owners discover the problem slowly: a door that won’t latch square, a header that dips under the second-floor load, a gate on the ADU entry that sags after two wet winters. The component was fine when installed; San Francisco’s marine air, seasonal soil movement, and decades of deferred maintenance speed up what the original build missed.
Which Master Halco Models This Applies To
Master Halco’s residential line covers fencing, gates, and structural metal components that show up throughout San Francisco additions and ADUs – gate frames, posts, anchors, and hardware. Identifying the right replacement starts with the stamped label on the post or frame, plus measurements taken on site: post spacing, frame gauge, and anchor bolt pattern. Skip the visual guess; a mismatched gauge is the most common compatibility failure we correct. OEM Master Halco parts give you exact spec match and finish consistency, which matters for visible elements on a San Francisco ADU entry. Quality aftermarket equivalents work for concealed structural hardware at lower cost. We source the correct part against your model – we don’t stock parts or carry them on a truck, so every piece is ordered for your project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Master Halco Home Additions & ADU Is Failing
Watch for these symptoms and match them to the cause:
- Sagging gate or door frame on the ADU: anchor bolts have backed out of the concrete or the post base has corroded in San Francisco’s salt air. Left alone, load transfers to the frame.
- Racking or leaning structures: soil movement or missing cross-bracing pushing against the Master Halco component. Common on hillside lots.
- Rust bloom at welds or seams: coastal moisture attacking the finish. Master Halco galvanized components last decades inland, but San Francisco’s fog belt shortens the timeline.
- Gate hardware that won’t hold adjustment: the hinge or latch has worn past spec, or the frame is out of square.
- Visible gaps at the addition attachment point: settlement at the junction where the new structure meets the existing house. Needs structural review, not just a patch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for San Francisco follows the project scope, not just the part:
- Home Addition: $53,100 – $153,400
- ADU Construction: $106,200 – $259,600
- Garage Conversion (common ADU path): $35,400 – $94,400
What drives the range: permit complexity in San Francisco, site access, whether the fix requires structural engineering, and finish level. Every estimate is line-item and written – parts, labor, permits, and inspection costs visible before we start. All work is covered by our 730-Day Done Right Promise. The number you see is the number you pay, and we pull the permits and pass the inspections.
DIY or Call Us?
A homeowner can safely check visible signs: look for rust bloom, check whether a gate latches squarely, photograph any gap at the attachment point. What we don’t recommend is attempting structural repairs to the Master Halco frame or its anchors – a partially backed-out anchor under load can release suddenly, and re-torquing without checking the substrate can crack the concrete. For anything touching the structural attachment or a load-bearing frame, call a trained professional. We offer free estimates with a written line-item scope. Call (866) 320-2646 and a live person answers, 24/7.
FAQs
Most galvanized Master Halco components last 20+ years inland; in San Francisco’s fog belt, coastal corrosion can shorten that to 12 – 15 years without maintenance. Call (866) 320-2646 for an assessment on your specific install.
Sometimes – a worn hinge or latch is a swap, but a corroded post base or backed-out anchor with frame movement calls for replacement, not tightening. We’ll tell you honestly on the estimate.
A hardware or anchor fix is often completed in a single visit. Structural repairs or full attachment-point work run longer and are scheduled against your written scope.
We order against the model and measurements from your site, not a guess from a photo. You get the exact spec or a documented quality equivalent, listed on the estimate.
For full-scope additions, ADUs, and the material partners behind them – including KraftMaid, Cambria, and Silestone – call (866) 320-2646 for your free estimate.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.