Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Bufftech Driveway & Pavers: The San Francisco Owner’s Guide
We install and repair Bufftech-compatible driveway and paver components across San Francisco, with most paver driveway projects running $8,260 to $21,240 installed and driveway replacement between $5,900 and $16,520. Buffalo, NY-based Bufftech is best known for its vinyl fencing line, so San Francisco homeowners who call about “Bufftech driveway and pavers” are usually dealing with one of two things: a vinyl gate or fence post that sets the edge of a paver driveway and has cracked at the ground line, or a paver field that has settled against a Bufftech fence line after a wet winter. You find out the hard way – a gate that drags the concrete, a post leaning into the paver course, or a driveway edge that’s dropped a half inch since spring.
Which Bufftech Models This Applies To
Bufftech’s vinyl lines matter here in a specific way: the posts, rails and brackets that frame a driveway gate or sit in the planting strip beside pavers. The product families you’ll see on San Francisco properties include the CertaGrain and Bradford lines (textured, wood-look vinyl) and the Bufftech Privacy and Picket systems; the post and rail dimensions are what matter to your driveway and paver work, not the panel style. Identify your part three ways before you call anyone: measure the post sleeve outside dimension (common sizes are 4×4, 5×5 and 8×8 nominal), look for a stamped or printed label on the inside face of a rail or cap, and photograph the connector or bracket where the gate or fence meets the paver edge.
OEM versus aftermarket is a real decision on Bufftech. OEM posts and rails match your existing assembly’s dimensions and finish, but lead times on a special-order cap or bracket run longer than most owners expect. A quality aftermarket sleeve or bracket that matches the measured dimension works fine on a gate post and costs less, but the color match to aged vinyl can drift by a shade. We tell San Francisco owners the truth: on a visible gate frame, match OEM; on a post buried in a paver border, aftermarket is a sensible call. We’re an independent service provider, not affiliated with Bufftech, so we’re not locked into one supply chain.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Bufftech Driveway & Pavers Is Failing
- Post leaning into the paver course. Frost heave doesn’t hit San Francisco hard, but our wet winters saturate soil and the post footing settles. Once a post leans two degrees, the rail torque loads the bracket and it cracks.
- Gate dragging on the paver or concrete edge. The hinge-side post has shifted or the gate sagged. Left alone, the drag chews the bottom rail and the paver edge lift.
- Pavers settling against a fence line. Water running off the fence base erodes the bedding sand. You’ll see a dip in the first course within 18 to 24 months of a poor original base.
- Cracked cap or connector bracket. UV exposure plus a bad footing flexes the joint. The crack is the symptom, not the cause – the footing is what needs fixing.
- Efflorescence or green algae on pavers at the fence base. That’s a drainage and shade pattern, not a paver defect. Re-leveling and re-sanding the border course usually fixes it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what San Francisco owners actually pay for the driveway and paver side of this work, installed:
| Service | Installed Price Range |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Paver patio installation | $4,130 – $12,980 |
| Driveway replacement | $5,900 – $16,520 |
| Concrete driveway installation | $5,310 – $14,160 |
| Driveway sealing | $295 – $825 |
What drives the high end: clay-heavy soil in areas like the Inner Sunset and Noe Valley, slope and grading, and haul-away on a tight city lot. Parts and labor are quoted separately so you see what the post, bracket or paver course costs versus the crew time. Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right – and the number you see on the quote is the number you pay.
DIY or Call Us?
What you can safely do yourself: measure the post, photograph the failed bracket, verify the gate gap, and clear the paver joints of debris. What we don’t recommend for a homeowner is resetting a post footing or re-lifting a paver field on a San Francisco slope – a post set in 18 inches of concrete can swing and take out a fence section and a paver border with it, and a badly re-set footing fails again in one wet season. For anything structural – footings, gate posts, paver base – call a trained crew. We’re live 24/7, background-checked, and uniformed on every job. Call (866) 320-2646 to get the part matched and walked through the fix.
FAQs
Vinyl posts and rails typically hold up 20+ years in our climate because we don’t get freeze-thaw cycles, but the footing and paver bedding are the weak points, not the vinyl. Plan on footing repair or re-leveling of the border course every 10 to 15 years in a wet lot.
Often yes – a cracked bracket or single post can be swapped without tearing out the paver field. If the post footing has failed, the footing is what gets redone and the vinyl can usually be reused. We assess on site before quoting. Call (866) 320-2646 for a free estimate.
A single post or bracket swap is usually a one-visit job; a footing reset plus border re-leveling runs two days in most San Francisco yards. Larger paver sections and full driveway replacement are scheduled multi-day work with a fixed timeline on the quote.
We measure the post or rail, verify the Bufftech line where a label exists, and source OEM or a dimension-matched aftermarket equivalent – whichever fits your gate and paver border best. You’re told which and why before we order. Call (866) 320-2646 for a free estimate.
We handle Bufftech-compatible driveway and paver work alongside the material brands San Francisco homeowners ask us about – KraftMaid, Cambria and Silestone for the rest of the house. If your gate post is leaning into the pavers or the border course has dropped, call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate and a straight answer on whether it’s a part swap or a footing reset.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.