Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Kitchen Remodeling: The San Francisco Owner’s Guide
If you own an ActiveYards kitchen and a component has failed, replacement parts for ActiveYards cabinetry and millwork are available through authorized channels, and we install them across San Francisco. Installed kitchen remodeling work in San Francisco typically runs $16,520 to $53,100, and most single-part swaps are completed in a single visit with upfront pricing. ActiveYards makes outdoor living products – cabinetry, storage systems, and structural millwork – and San Francisco remodelers have used it for years on kitchens with outdoor-influenced build-outs.
Most owners find out something failed the same way: a cabinet door stops aligning, a drawer glides rough, a hinge pulls out of soft wood, or the finish on a panel starts to flake near a sink or window exposure. Sometimes it’s a single part. Sometimes it’s a system you didn’t know was failing until a contractor pointed it out. This page covers what’s actually replaceable, what it costs in San Francisco, and where DIY goes wrong.
Which ActiveYards Models This Applies To
ActiveYards products are typically identified by a label inside a cabinet door, on the inside face of a drawer box, or on the back panel of freestanding units. If the label is missing, the part number can usually be identified by measuring the cabinet box height, width, and depth to the sixteenth of an inch and matching the hinge-pattern spacing on the door. Hinge centers, drawer glide pilot holes, and shelf-pin spacing vary by series, so a part that “looks identical” often isn’t. This is the compatibility gotcha that trips up most online orders.
For replacement work, the OEM-versus-aftermarket decision comes down to two things: model age and part availability. If ActiveYards still supplies the part for your series, OEM is the safest match. If the series is discontinued or the part is backordered, a quality aftermarket equivalent (Blum-style hinges, Salice, or Hettich glide systems) often outperforms the original and matches the door pattern without modification. We evaluate this case by case and tell you plainly which route makes sense for your kitchen.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Kitchen Remodeling Is Failing
- Doors sagging or rubbing the frame. Usually a hinge that’s loosened from repeated use or a hinge-plate screw that’s stripped soft wood. Left alone, the door warps and stresses the whole box.
- Drawers that stick, drift open, or feel loose. Worn glide wheels, a bent slide rail, or a failed undermount clip. Common in kitchens near the coast where salt air accelerates metal wear.
- Finish peeling or bubbling near the sink or window. Moisture intrusion or UV exposure through glass. San Francisco’s fog belt hits south-facing and west-facing panels harder than the manufacturer’s test cycle assumes.
- Soft, crumbling wood at cabinet feet or base. Water wicking up from a slab leak or slow drain drip. Once the substrate fails, no finish repair will hold.
- Doors not lining up after a minor bump. Worn or mismatched hinges on one side of a pair. Mismatched hardware is the most common cause we see.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed kitchen work in San Francisco, calibrated to the local market:
| Service | Installed Range |
|---|---|
| Full kitchen remodel | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What moves you up or down that range: the number of parts and doors involved, whether the boxes need repair before new parts go in, and whether countertops or backsplash need to come out to access the failed component. We quote line-item, parts and labor separately, so you see what you’re paying for. Every install we do is covered by the 730-Day Done Right Promise. If a part we install fails within that window through a workmanship issue, we make it right. We also carry KraftMaid, Cambria, and Silestone when an ActiveYards match isn’t realistic and a replacement system makes more sense.
DIY or Call Us?
Some things are safe to check yourself: hinge tightness, glide alignment, shelf pins, and whether the part number label is legible. Those cost you nothing and take five minutes. What goes wrong with DIY on cabinet and door system work: stripped screw holes from over-tightening, mismatched hinge geometry that ruins a door fit, and finish repairs that look obvious under any normal kitchen light. There’s no high-tension danger in this category – it’s not springs or gas – but the cost of a botched door repair often exceeds the cost of a proper install, and a damaged door face can’t be undone.
We’re an independent service provider, not affiliated with ActiveYards, but we source their parts through authorized channels and we know the compatibility details. Call (866) 320-2646 to schedule a free estimate. We answer live, 24 hours a day.
FAQs
Ten to fifteen years is typical for hinges and glides in inland San Francisco; eight to twelve in the fog belt where moisture and salt air accelerate corrosion. Finish life on doors and panels depends on sunlight exposure, so west- and south-facing surfaces run shorter than north-facing ones. Call (866) 320-2646 for an exact quote – estimates are free.
Often yes. A stripped screw hole can be filled and re-piloted, a hinge plate can be repositioned, and a single glide can be swapped without touching the door. If the box itself is soft or the finish has failed through to the substrate, replacement is the honest answer. We’ll tell you which you’re looking at during the estimate.
Most single-part replacements are done in one visit, typically one to three hours depending on access. Full door-and-glide refreshes across a kitchen take half a day to a full day. We confirm timing on the estimate, not the day of.
Through authorized ActiveYards channels when the part is available for your series; through vetted aftermarket equivalents (Blum, Salice, Hettich) when it isn’t. We confirm the part number with you before ordering so there are no second-guessing visits.
When a part is failing, the question isn’t whether to fix it – it’s whether the fix will hold. Groundwork Construction Co. of San Francisco handles ActiveYards and compatible kitchen replacements with upfront pricing, a written line-item quote, and the 730-Day Done Right Promise. We answer live, 24 hours a day. Call (866) 320-2646 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.