A Groundwork company - serving San Francisco, CA

Belgard Driveway & Pavers in San Francisco, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Belgard Driveway & Pavers: The San Francisco Owner’s Guide

We install Belgard-compatible driveway and paver systems across San Francisco, and a full paver driveway typically runs $8,260 to $21,240 installed, depending on square footage, base prep, and the paver series you choose. We’re an independent service provider, not affiliated with Belgard, and we match the right product to your existing installation rather than guessing. We don’t offer same-day installs on hardscape work because proper base compaction and drainage take real time. Most owners discover a failure the same way: a paver rocks underfoot after winter rains, joints pump sand when they walk across them, or a section near a downspout has settled into a shallow bowl that holds water.

Call (866) 320-2646

Which Belgard Models This Applies To

Belgard’s driveway and paver catalog splits into a few families you’ll want to identify before we quote anything. The Cathedral Stone and Mega-Bergerac lines are large-format slab-style pavers common on San Francisco driveways where the installer wanted a poured-concrete look. The Urbana Stone and Holland lines are the smaller, tighter-jointed workhorses that show up on hillside driveways and side yards. Permeable systems like Turfstone and Aqua-Roc are a separate animal entirely and need different base aggregate.

To identify what you have, pull one loosened paver and measure the face: large-format slabs run in the 12″x24″ to 18″x30″ territory, while Holland-style units sit around 4″x8″. Look for a stamp or a manufacturer mark on the underside. The real compatibility gotcha is height. Belgard paver series don’t all share the same thickness, and a 60mm paver swapped into a field laid at 80mm leaves a lip you’ll trip on for years. If the failed piece came from an edge course, a border, or a soldier row, the cut pattern matters as much as the model. We carry no parts on any truck, so matching happens at the supplier level against your actual sample.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Belgard Driveway & Pavers Is Failing

  • Pavers rocking or shifting underfoot. The bedding sand has washed out or the base wasn’t compacted to spec. In San Francisco, our clay-heavy soils and winter rain push this along fast on any slope.
  • Joint sand pumping out when you walk. Water is moving through the joints instead of draining off the surface. Usually a drainage or grading problem rather than a paver problem.
  • Sunken sections near downspouts, garage aprons, or slope transitions. The sub-base has consolidated or eroded. This is the most common failure we see on San Francisco hillside driveways after a wet season.
  • Chipped edges and spalled faces on the surface. Can be freeze-thaw in colder zones, but locally it’s often a base that flexed or a unit that took a hit from a turning tire.
  • Weeds and moss pushing through joints. A sign the polymeric or stabilized joint sand has degraded and the surface isn’t draining the way it should.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for Belgard-compatible paver work in San Francisco runs on these ranges. Upfront pricing, no surprises: the number we quote is the number you pay, and the 730-Day Done Right Promise covers the workmanship in writing.

Scope Installed Range (San Francisco)
Paver driveway installation $8,260 – $21,240
Paver patio installation $4,130 – $12,980
Driveway replacement $5,900 – $16,520
Driveway sealing $295 – $825

What drives the number: square footage, how much base has to come out and be rebuilt, slope and access on San Francisco lots, paver series (large-format Cathedral Stone costs more per square foot than Holland), and whether the joint sand needs stabilizing. Repairing a section instead of the whole driveway is often the smarter call, and we’ll tell you when it is. The $1,000 off projects over $10,000 and 0% financing for 18 months apply to qualifying work.

DIY or Call Us?

You can safely check a few things yourself. Lift a loose paver and look at the sand and base under it. Note where water pools after rain. Measure the failed unit’s face dimensions and thickness so we can match the series. What goes wrong in DIY is the base: homeowners reset a paver on fresh sand without fixing the compacted aggregate below, and it rocks again within a season. On permeable systems, the wrong joint aggregate clogs the drainage layer and defeats the whole install. And any work near a gas line, utility stub, or retaining wall is where a weekend fix turns into a real problem. Most jobs finish in a single visit once we’ve matched the part.

Call (866) 320-2646 to schedule your free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch