Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Driveway & Pavers: The San Francisco Owner’s Guide
We install Unilock-compatible driveways and paver systems across San Francisco, and a full paver driveway typically runs $8,260 to $21,240 installed, with repair and reset work priced from a much smaller starting point. Unilock makes premium concrete and clay pavers, retaining walls, and permeable systems, and most owners discover a failed component the same way: a paver rocks underfoot after a heavy rain, a joint opens wider each season, or the edge restraint lifts and the whole field starts to shift downhill. One cracked unit is usually a small fix. Movement across a section means the base or the restraint has failed, and that’s the moment to get eyes on it.
Groundwork Construction Co. of San Francisco is an independent service provider and is not affiliated with Unilock. We match the right system for your existing field and install it to spec.
Which Unilock Models This Applies To
Unilock pavers live in families, not one-size-fits-all parts. The lineup includes structural slab pavers like Brussels Block (the original tumbled, dimensional block), Elegance and Beacon Hill for the formal, flat-top look, Richcliff and Bristol Valley for the textured adirondack feel, and Trevista and Stylestone for a modern, linear read. Each family has its own thickness and face module, and the restraint systems they need differ too.
Before we quote, we identify the field the same way you can: flip up a loose unit and read the stamped pattern or mold mark on the underside, measure the length, width, and depth with a tape (most Unilock pavers are 2 3/8 or 3 1/8 inches thick), and note the joint width. The OEM decision for Unilock is real. Original Unilock units match color and texture across a blended face; a generic aftermarket block that’s the “same” nominal size often reads two shades off in a San Francisco fog belt and shows within a year. For repairs we match the family and the specific blend lot where we can, and we source an approved equivalent only when the original module is unavailable or discontinued.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Driveway & Pavers Is Failing
The part isn’t a single wear item for pavers; it’s the system that holds the field together. These five symptoms tell you which part to look at:
- Paver rocks or sinks underfoot. The bedding sand beneath has washed out or the base wasn’t compacted to depth. One or two units wobbling after a storm is the first call, not a panic.
- Widening joints and grass in the seams. Joint sand has washed through or the poly sand has failed at the edge. In San Francisco’s wet winters, unsealed joints wash out faster than most owners expect.
- Edge restraint lifting or separating. The curb or edge restraint has lost its bed or the spikes have pulled. Once the edge gives, the whole field spreads, and that failure runs downhill.
- Heaving, cracking, or cracked pavers. A high clay-content base swells and shrinks with the wet-dry cycle we get here, or too-thin base allows a paver to flex and crack.
- Efflorescence, milky haze on the face. Soluble salts rising from moist base or joint sand. Cosmetic in the short term, but a sign moisture is hanging in the base longer than it should.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full paver driveway installation in San Francisco runs $8,260 to $21,240; a paver patio runs $4,130 to $12,980; and driveway replacement (pulling the old field, base rebuild, and reset) runs $5,900 to $16,520. A localized repair or reset of a failing section is quoted separately and priced far lower. What drives the range: the size of the field, whether the base needs full rebuild or just re-leveling, whether we’re replacing edge restraint, and the paver family you match.
Every quote is a line-item breakdown, so you see the paver cost, the base prep, the joint sand, the restraint, and the labor apart. The number you see is the number you pay. The work is covered by our 730-Day Done Right Promise, and we pull permits and pass inspections where a San Francisco driveway or grading scope calls for it.
DIY or Call Us?
What a homeowner can safely check: lift one unit and read the mold mark, measure the paver depth and joint width, photograph the failing edge, and mark the outline of any soft or heaving section. That’s useful information, and it helps us quote fast.
Where DIY goes wrong: resetting a paver field without rebuilding the compacted base is the classic failure. You’ll re-set the visible units, and within two wet seasons the whole section heaves again, because the problem was never the paver, it was the base and the drainage underneath it. Hand-pulling edge restraint on a field that’s already spreading can also send units downhill onto a slope. Set the field back once, with the base built to depth, and it stays put. Call (866) 320-2646 and we’ll walk through what to check before you move a single block.
FAQs
A properly installed Unilock paver driveway typically runs 25 to 30+ years, often far longer, because the concrete units resist freeze-thaw and salt better than poured concrete. In San Francisco’s damp, foggy microclimates, the paver face holds up; it’s the base and joint sand underneath that need attention sooner. Call (866) 320-2646 for a free site check on your field.
Often, yes. A localized section with a soft base, a failed edge restraint, or a handful of cracked units can be reset and re-leveled without touching the rest. We scope the repair, quote it line by line, and only recommend full replacement when the base has failed across the whole field. Estimates are free.
A localized repair or reset usually finishes in a day or two; a full paver driveway rebuild takes several working days, mostly because the base has to cure and compact between lifts. We’ll give you the real timeline in the estimate, not the optimistic version. Call (866) 320-2646 to schedule yours.
We match the actual paver family and blend lot, not just the nominal size, because a same-size block from a different blend reads two shades off in San Francisco’s low light. Where the original module is still current we source that family; where it’s unavailable we use an approved equivalent and show you the sample before we order. Call (866) 320-2646, and we’ll confirm the match during your free estimate.
We handle Unilock driveways and pavers in San Francisco, and we also install and repair other premium brands across our lines, including KraftMaid, Cambria, and Silestone, so your project gets matched to the right material from the start. Ready to get an honest number? Call (866) 320-2646 to schedule your free estimate, ask about the 0% financing for 18 months and the $1,000 off projects over $10,000, and get a written line-item price with the 730-Day Done Right Promise behind it.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.