Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The San Francisco Owner’s Guide
Unilock-compatible kitchen remodeling in San Francisco typically runs $16,520 to $53,100 installed, depending on scope, and most of the work is planned and scheduled rather than done on a same-day call. We build the work around your existing Unilock specification so your finish, profile and layout constraints stay intact from demolition through final walkthrough. Homeowners usually find a problem the same way: a cabinet run that stops closing cleanly, a seam at the counter that has opened up, a backsplash tile that has gone hollow, or a floor transition that no longer sits flush with the Unilock finish they chose.
Groundwork Construction Co. of San Francisco is an independent service provider and is not affiliated with Unilock. We install and repair to your product’s spec, we pull the permits, and we put the work behind our 730-Day Done Right Promise: if it isn’t done right, we make it right.
Key Takeaways
- Unilock kitchen scope in San Francisco usually lands between $16,520 and $53,100.
- Most failures we see are at transitions, seams and penetrations – not in the middle of a panel or tile field.
- We pull the permits and coordinate inspection on any San Francisco kitchen job that touches electrical, plumbing or framing.
- You get upfront pricing in writing, and the number you see is the number you pay.
- Our technicians have up to 12 years of experience on kitchen installs and finish work.
Which Unilock Models This Applies To
Unilock kitchen work splits into a few product families, and getting the right replacement or matching piece starts with identifying which one you have. Exterior-grade paver and slab products are spec’d for freeze-thaw and moisture exposure, while interior finish components are spec’d for cleanability, heat tolerance and load. They are not interchangeable, and that is the single most common compatibility gotcha we run into: a product that looks identical in color and texture can carry a very different thickness tolerance or edge profile than the interior version.
To identify yours, look for the product label on the original carton, the back of a loose piece, or the spec sheet left with your closing documents. Failing that, measure the face dimensions and nominal thickness with calipers. Unilock face sizes commonly run in modular increments, so a difference of a few millimeters is often the tell between two near-identical product families. Your install documents should state the series and the finish.
On the OEM-versus-aftermarket question: for visible finish work, match the OEM product whenever it’s still in production. Aftermarket equivalents are fine for hidden or structural layers where the spec is matched, but they are not a safe substitute in the visible field. That’s a color-lot and texture risk, not just a quality one.
We also install and service KraftMaid, Cambria and Silestone components when your San Francisco kitchen calls for them alongside the Unilock work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Kitchen Remodeling Is Failing
- Seams and joints opening at the counter or floor transition. Usually movement from an under-built subfloor or a substrate that wasn’t flattened before the finish layer went down. San Francisco’s older homes and their uneven framing are the usual suspects.
- Hollow sound when you tap a backsplash tile. The thinset didn’t get full coverage, or the substrate flexed after install. In a city where kitchen walls are often plaster over lath, prep matters more than the tile itself.
- Cabinet doors and drawers that no longer close cleanly. After years of daily use, hinges sag and the box has racked. If the cabinet run was installed over an unlevel floor, the failure shows up at the doors first.
- Grout or caulk lines cracking at inside corners. Almost always thermal or structural movement, not a material failure. Re-caulking without addressing the movement means the crack comes back.
- Finish surface chipping or delaminating at edges. Often from a cut edge that wasn’t sealed or a piece installed too tight against a wall or fixed element with no expansion room.
One honest note on safety: a kitchen job that involves relocating a gas line, opening an electrical panel or working on wiring is not a DIY project. Those are genuinely dangerous components, and we recommend a trained professional for anything on that list. We are not going to hand you step-by-step instructions for work that can hurt you. We will tell you plainly when the work needs a permit and a licensed trade.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Kitchen remodeling in San Francisco runs $16,520 to $53,100 installed. A small kitchen remodel is $10,620 to $23,600. Surrounding line items, if your scope calls for them:
| Scope | Installed range (San Francisco) |
|---|---|
| Kitchen remodel | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What drives the number: square footage, how much demolition and disposal, whether the plumbing and electrical get moved (and the permit that comes with that), and the finish level you choose. In San Francisco, access and setup time add real cost on a lot of homes – narrow entries, stair carries and street parking all take time on the clock, and we price that honestly instead of hiding it.
You get upfront pricing: a written line-item quote, a fixed number with no change orders for the work we’ve scoped, permits pulled and inspections passed where required, and the 730-Day Done Right Promise on the workmanship. The number you see is the number you pay. From foundation to finish line, one contractor handles the job.
DIY or Call Us?
You can safely check a lot yourself. Tap around the finish field for hollow spots. Look at the seams and caulk lines and note exactly where they’re opening. Check that doors and drawers are square in their openings. Photograph the original product label and spec sheet if you have them. Those photos are worth a lot when you call – a good match starts with knowing exactly what’s there.
Where DIY goes wrong is in the parts that look simple and aren’t: matching a visible finish product, flattening a substrate before a finish layer goes over it, and the electrical and gas work that a San Francisco kitchen scope frequently touches. A poorly matched finish in a visible field is a costly do-over, and gas and electrical work is where people get hurt. We do that work correctly, first time, with the permit pulled.
Call (866) 320-2646 to schedule your free estimate. Calls are answered by a live person, 24 hours a day, even when the question pops into your head at 11 p.m.
FAQs
With a properly flattened substrate, correct edge sealing and normal kitchen use, a well-installed Unilock kitchen finish commonly holds up 15 to 20 years or more. The California realities that shorten that: interior moisture and humidity swings from our coastal climate, older homes with movement in the framing, and any area where the substrate wasn’t prepped. The prep is what decides the lifespan, not the product family.
Often, yes. Localized damage, a cracked seam or a loose tile in a field is frequently repairable without ripping out the whole run. We assess whether the underlying cause (movement, moisture, uneven substrate) can be corrected in the repair scope; a repair that leaves the cause in place will fail again. Call (866) 320-2646 for a free estimate, and we’ll tell you honestly which path is the better spend.
It depends on scope. A localized repair or a single-component swap may finish in one visit; a full kitchen remodel in San Francisco typically runs weeks, not a single day, and we schedule it around your use of the kitchen. What we won’t do is promise same-day on planned construction – nobody finishes a kitchen remodel in a day, and a contractor who tells you otherwise is selling you something you won’t get.
We match your product from the label, spec sheet or physical measurements and source the correct series and finish. Where the exact OEM component is still in production, we match it. Where it isn’t, we get as close as the spec allows on a visible surface and tell you upfront. We don’t stock parts or carry them on a truck, so the sourcing is scoped into the quote as a line item, not a surprise later.
Call (866) 320-2646 to schedule your free estimate for Unilock kitchen remodeling in San Francisco. You get a written line-item quote, upfront pricing with no surprises, permits pulled where required, and the 730-Day Done Right Promise behind the work. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, so the scope you actually need stays reachable on a real budget.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.