Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Driveway & Pavers: The San Francisco Owner’s Guide
Tremron pavers are a premium hardscape product, and when something goes wrong – a heaving driveway, a shifted patio edge, cracked units after a wet winter – the fix usually comes down to base prep, joint sand, or a failed edge restraint rather than the paver face itself. Most San Francisco homeowners we meet discover the problem after a rainy season lifts a corner of the driveway or a paver rocks underfoot on a slope. Installed repair and resurfacing work in San Francisco typically runs $2,950 – $8,260 for localized paver repair, while a full paver driveway installation runs $8,260 – $21,240, and we schedule free on-site estimates within a few business days.
We’re an independent installer and repair provider, not affiliated with Tremron. What we know is how their products behave in Bay Area soil, fog, and hillside grades.
Which Tremron Models This Applies To
Tremron makes a wide catalog of concrete pavers – Olde Towne, Georgetown, Mega Olde Towne, Kingston, Campton, Tahoe, Capri, and the Bristol and Cambridge wall systems among them. Each line has its own nominal face dimensions and thickness, typically 2 3/8 inches for driveways and 1 5/8 inches for patios and walkways, so a replacement paver from a different series won’t sit flush with your field. Check the underside of a failed unit or the original installation paperwork for the series name and color code; the SAE-compliant color blends are batch-sensitive, and a “Sierra” from a 2019 production run can read slightly warmer than a 2024 run of the same name.
We source Tremron replacements through authorized dealers to match series, thickness, and colorway. When an exact match isn’t available – discontinued blends are real – we discuss a close-match option or a purposeful border redesign rather than dropping a visibly different unit into the middle of your driveway.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Driveway & Pavers Is Failing
- Paver rocks underfoot on a driveway. Usually failed base compaction or washed-out bedding sand. On a San Francisco hillside, water finds the low side of the base and hollows it out over a few rainy seasons.
- Heaved or “tented” field joints. Roots from a nearby ficus or Monterey cypress, or clay expansion after a wet winter. The paver lifts because something underneath is pushing it.
- Cracked units near the driveway apron. Vehicle loads concentrated at the transition to the street or garage slab. Thin base or missing geotextile fabric shows up here first.
- Joint sand washing out after rain. Polymer sand that wasn’t installed to spec or was over-watered during cure. Once the sand goes, the interlock loosens and the paver walks.
- Edge restraint pulling away from the driveway. Failed spikes or a spalled concrete curb. Without a locked edge, the outer course migrates and gaps open along the perimeter.
In San Francisco, we regularly see paver failures on sloped Sunset and Noe Valley driveways after the first heavy atmospheric river of the season – the base undercut shows up fast when 2 inches of rain runs downhill through an under-drained bed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how Tremron paver work prices out in San Francisco:
| Scope | Installed Range |
|---|---|
| Localized paver repair (lift, rebase, reset) | $2,950 – $8,260 |
| Paver driveway installation (new) | $8,260 – $21,240 |
| Paver patio installation | $4,130 – $12,980 |
| Driveway sealing | $295 – $825 |
What drives the range: total square footage, site access on a steep San Francisco lot (hauling material up stairs adds labor), base depth to reach stable native soil, edge restraint type, and whether a section of old driveway has to be removed first. We quote upfront pricing – the number you see is the number you pay – and every repair and installation is covered by our 730-Day Done Right Promise. If a joint opens or a reset paver lifts inside two years, we come back and fix it.
DIY or Call Us?
You can safely check a few things yourself: pull a loose paver by hand if it lifts without prying, look at the base material underneath (crushed rock, sand, or exposed dirt tells you a lot), and run a garden hose over the area to see where water pools. What puts homeowners in over their heads is base correction on a slope – removing, recompacting, and re-screening a paver bed to the correct 1-inch-per-4-foot fall takes the right plate compactor, proper geotextile, and a screed rail system. Doing it wrong once usually costs more to fix than the original repair. If a paver has heaved near a gas line, irrigation main, or foundation, don’t pry at it – call us first.
Call (866) 320-2646 for a free estimate and we’ll diagnose the base, match your Tremron series, and give you a written scope. Live person, 24/7.
FAQs
How long do Tremron pavers last in San Francisco?
A properly installed Tremron paver driveway lasts 25 – 30 years in Bay Area conditions. The pavers themselves outlast the base – most failures we see are base or joint-sand failures at 8 – 15 years, not material failure. Call (866) 320-2646 for an exact quote on your driveway – estimates are free.
Can you repair failing Tremron pavers instead of replacing the whole driveway?
Yes, in most cases. Localized repairs – lifting a heaved section, resetting a settled area, re-sanding joints, replacing a failed edge restraint – usually run $2,950 – $8,260 and preserve the original field. Full replacement only makes sense when the base is failed under 40% or more of the driveway. Call (866) 320-2646 for a free assessment.
How long does a Tremron paver repair take?
A localized repair is typically a one-to-two-day job depending on square footage and whether base material needs to come out. Full paver driveway installation runs three to six days on a typical San Francisco lot, longer on steep hillside access with stair hauling.
How do you source the replacement Tremron paver?
We order through authorized Tremron dealers using the series name, thickness, and color code from your existing installation – matched to the closest current production run. For discontinued blends, we walk you through close-match and border-redesign options before ordering. We also service KraftMaid, Cambria, and Silestone on other parts of the home, but pavers are our whole focus on this page.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.