Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The San Francisco Owner’s Guide
We install and repair Tremron bathroom remodeling systems in San Francisco, and the installed price for a full bathroom remodel in this market runs $10,620 to $33,040, with small bathrooms at $5,900 to $14,160. Groundwork Construction Co. of San Francisco is an independent service provider, not affiliated with Tremron. Most owners don’t call us until a hard failure shows up: a hairline crack spreading across a Tremron porcelain floor tile after a slab shift, a grout joint letting water into the substrate in a Marina District bathroom, or a shower pan that’s been quietly flexing underfoot for months before the caulk line opens up. The part tells you when it’s done, usually in the middle of a wet season when the leak finds the ceiling below.
Which Tremron Models This Applies To
Tremron makes porcelain and ceramic floor and wall tile, pavers, and pool coping, and the product families most San Francisco owners have in their bathrooms are the 12×24 and 13×13 porcelain lines, the 6×6 decorative mosaics, and the 2×2 and 3×3 shower floor mosaics. Identifying the right replacement starts with the carton label still taped to a joist or tucked in the garage: it carries the shade, caliber, and lot number, and matching all three matters because porcelain dye lots shift visibly under a bathroom’s overhead lighting. If the label is gone, measure the tile face and thickness with calipers (most Tremron bath tile sits between 8mm and 10mm thick) and check the back for the manufacturer stamp. OEM replacement matters here less than caliber matching: a Tremron tile from a different production run can vary 1-2mm in fired size, which is enough to throw off the grout line across a bathroom floor. We can source Tremron-compatible porcelain that meets the same ANSI spec when OEM stock from the original lot is unavailable.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Bathroom Remodeling Is Failing
Porcelain and ceramic fail in predictable ways, especially in San Francisco’s fog-belt bathrooms where interior humidity sits high and slab movement is a real thing. These are the five failures we see most:
- Hairline cracks running through the tile face or from corner to corner. Usually a substrate issue, not a tile defect: the slab or backer board has moved and the tile couldn’t flex with it.
- Grout lines crumbling or turning dark along the floor perimeter. Water is getting behind the tile through failed grout, and the dark color is mold in the substrate.
- Hollow sound when you tap the tile. The thinset didn’t achieve full coverage during install, and that tile is one dropped shampoo bottle away from a break.
- Lippage at the joints, or a tile lifting off the floor. Subfloor deflection or a failed bond, and both get worse every time someone steps on that spot.
- Shower pan flex, soft spots, or a caulk line that keeps reopening. The waterproofing layer under the mosaic has failed, and the tile above it is the last thing holding water out of the framing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Bathroom remodeling work in San Francisco runs $10,620 to $33,040 for a full remodel, $5,900 to $14,160 for a small bathroom, $5,310 to $14,160 for a walk-in shower install, $3,540 to $10,030 for a shower replacement, and $945 to $3,540 for a vanity install. Tremron tile work sits inside those numbers as a line item, and the range moves on tile square footage, substrate condition, and waterproofing method. Our quotes are line-item and fixed: tile, thinset, grout, waterproofing membrane, and labor are all spelled out, and the number you see is the number you pay. Every job carries the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction, and calls are answered by a live person 24/7.
DIY or Call Us?
You can safely pull the carton label, measure and photograph the tile, check for hollow taps with a plastic tool, and take a moisture reading on the floor. Where DIY goes wrong on a bathroom is at the waterproofing: a shower pan that’s tiled without a proper sloped mortar bed and a bonded membrane will leak, and by the time you see it, the framing behind it has been wet for months. Grouting over a failed pan traps the water in. Tile work over a sagging slab fails within a season in San Francisco regardless of how careful the install was. If the substrate is stable and you’re swapping a few face tiles, it’s a reasonable weekend job. If water is involved anywhere, call (866) 320-2646 and we’ll tell you what’s actually failing before you spend a dollar on material.
FAQs
How long should Tremron bathroom tile last? Twenty to thirty years is realistic for a properly installed Tremron porcelain floor, but the tile outlives the install: grout typically needs refreshing at 10 to 15 years, and San Francisco’s humidity shortens that. Call (866) 320-2646 for an assessment before the grout fails completely.
Can a cracked Tremron tile be repaired instead of replaced? Sometimes, if the crack is cosmetic and the substrate is sound. A tile with hollow spots underneath will crack again, so the fix is removing it, addressing the backer, and setting a matching replacement. We’ll tell you honestly which one you need. Call (866) 320-2646 for a free estimate.
How long does the swap take? A single tile replacement is a few hours. A shower re-tile runs three to five days once you account for waterproofing cure time, and a full bathroom remodel runs two to four weeks depending on scope. We give you a written schedule before work starts, and calls are answered by a live person 24/7.
How do you source the replacement part? We start with the carton label, call out the shade and caliber, and match from Tremron-compatible porcelain at the same ANSI spec if the original lot is gone. All technicians are background-checked, arrive in uniform, and carry the 730-Day Done Right Promise on every install. Call (866) 320-2646 to schedule your free estimate.
Planning a Tremron bathroom update in San Francisco? Groundwork Construction Co. of San Francisco handles tile, substrate, waterproofing, vanities, and fixtures as one scope, and we also work with KraftMaid, Cambria, and Silestone when your project grows into the kitchen. You’ll get a line-item quote with no surprises and a guarantee backed in writing. Call (866) 320-2646 for a free project estimate and design consult. Ask about the $1,000 off projects over $10,000 and 0% financing for 18 months.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.