Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Roofing: The San Francisco Owner’s Guide
We install Tremron-compatible roofing and roof components across San Francisco, with typical roof repairs running $470 – $2,125, full roof replacement at $9,440 – $23,600, and tile roof repair at $710 – $2,950. Most Tremron roof problems we see in San Francisco start small: a missing or cracked piece after a wind event, a granule trail in the gutter, or a ceiling stain that shows up after the first real rain of the season. Owners usually spot the failure by looking up, not down.
The symptom that brings people to us is almost always the same. A storm rolls through the Sunset or the Richmond, a few shingles or tiles lift, and within a week there’s a brown ring on the ceiling. Or they’ve been on the roof with a tube of sealant every fall and want to stop patching. We get it. Here’s what actually fails, what the part costs, and where DIY stops being worth it.
Which Tremron Models This Applies To
Tremron makes roofing shingles and tiles, and the part you need has to match the profile, the exposure, and the color lot of what’s already on your roof. Shingle lines are identified by the bundle wrapper or the imprint on the back of a loose shingle. Tile profiles are matched by measuring the field tile width and the finished exposure – generally 9 to 13 inches depending on the series. Color matching matters too: Tremron runs color lots, and a new bundle of “the same color” from a different lot can read noticeably different on a south-facing slope.
On the OEM-versus-aftermarket question, we’re straightforward about it. For a small repair, a quality aftermarket equivalent that meets the same Wind and impact ratings is often fine and costs less. For a replacement where the new field has to tie into existing courses, OEM is the safer call because the profile and exposure match by design. We source the right part through our network of verified suppliers – we don’t claim to stock Tremron parts or carry them on a truck. If your roof is part of a broader exterior job, we also work with James Hardie siding and KraftMaid, Cambria, and Silestone on the interior side, so a failed roof doesn’t have to mean a second contractor.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Roofing Is Failing
- Granule loss in the gutters and downspouts. Tremron shingles shed some granules naturally in the first year or two. A steady trail after year five means the asphalt is aging out, and the surface is thinning toward the mat.
- Lifted or cracked shingles after wind. San Francisco’s exposed hillside blocks see gusts that pop nail heads and lift course edges. Once a shingle loses its seal-down, water gets under the overlap instead of running off it.
- Cracked or slipped tiles. Tremron clay and concrete tiles hold up well, but a slipped tile exposes the underlayment to UV and rain. A single tile can look cosmetic and still be a leak path.
- Ceiling stains or attic moisture. A brown ring on a second-floor ceiling almost always traces back to a compromised flashing point or a failed course, not the ceiling itself. It shows up in the rainy season, then dries and hides.
- Moss and dark streaking. Fog-heavy neighborhoods like the Outer Sunset and Inner Richmond feed moss and algae. It’s usually cosmetic, but roots and trapped moisture shorten the life of the roof underneath.
One San Francisco reality worth naming: the marine layer keeps roofs damp for long stretches and the summer fog cycle bakes and cools them daily. That cycle is hard on sealant and flashing. Roofs here fail at the penetrations and edges first, not in the middle of the field.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest pricing for San Francisco, installed:
| Work | Installed Range |
|---|---|
| Roof repair (patch, flashing, individual pieces) | $470 – $2,125 |
| Tile roof repair | $710 – $2,950 |
| Full roof replacement | $9,440 – $23,600 |
| Metal roof installation | $17,700 – $47,200 |
What drives the range: roof size and pitch, how many layers need tearing off, the condition of the decking once it’s exposed, and how much flashing and detail work the job needs. Old San Francisco homes often hide surprises at the valleys and chimneys, and we price those in writing before we start. Parts-plus-labor is broken out line by line, so you see what the material costs versus the install. Every job carries our 730-Day Done Right Promise – if it’s not done right, we make it right. No-hassle upfront pricing means the number you see is the number you pay.
DIY or Call Us?
There’s a real split here. You can safely check from the ground with binoculars: look for lifted or missing pieces, cracked tiles, and granules in the gutter. You can look in the attic for daylight and staining. That’s the limit of safe DIY, and it’s genuinely useful – it tells you whether you have a small repair or a replacement.
What we don’t recommend is getting up on a steep-pitch San Francisco roof, especially a two-story or a Victorian with a high ridge. Fall risk is real, and most one-off patches fail again within a season because the real problem is the flashing underneath, not the shingle on top. For tile, walking the field wrong cracks tiles you can’t easily match. When the symptom points to a leak path or a course failure, that’s a call to a trained roofer. We answer live, 24/7, and our technicians are background-checked and arrive in uniform.
FAQs
Plan on roughly 15 to 20 years for Tremron shingles and 30-plus for tiles, but the fog belt pulls the shingle end down toward the shorter side because of the constant wet-dry cycle. Coastal exposure and roof pitch shorten it further. Call (866) 320-2646 for an exact read on your roof – estimates are free.
Yes, if the failure is isolated and the surrounding field is sound. A single slipped tile or a flashing repair often runs $710 – $2,950 and buys real time. If granule loss or cracking is widespread, a patch just moves the leak down the road. Call (866) 320-2646 and we’ll tell you which one you have.
Most repair jobs finish in a single visit. A full replacement is typically one to three days depending on roof size and how much decking work turns up. We plan around weather and get you a written schedule up front. Call (866) 320-2646 for a free estimate.
We match your profile, exposure, and color lot through our verified supplier network rather than pulling from a truck. We’re an independent service provider, not affiliated with Tremron, so we source what fits your roof, not what’s convenient. Call (866) 320-2646 and we’ll confirm availability for your model.
If your Tremron roof is showing any of these signs, the fastest path is a free estimate. Call (866) 320-2646 – a live person answers 24/7 – and we’ll walk your San Francisco roof, give you no-hassle upfront pricing in writing, and back the work with our 730-Day Done Right Promise. Ask about our $1,000 off projects over $10,000 and 0% financing for 18 months.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.