A Groundwork company - serving San Francisco, CA

Oldcastle Kitchen Remodeling in San Francisco, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Oldcastle Kitchen Remodeling: The San Francisco Owner’s Guide

We install Oldcastle-compatible kitchen remodeling in San Francisco, and a full kitchen project typically runs $16,520 – $53,100 installed, with smaller kitchens landing around $10,620 – $23,600. Most San Francisco owners don’t discover a problem with their Oldcastle kitchen components all at once. It starts small: a cabinet door that won’t sit flush, a countertop seam that catches a fingernail, a drawer that grinds halfway open. Then the drawer front starts to sag and the whole run of cabinets looks tired. By the time you’re searching for parts, the failure has usually been working quietly for months.

Call (866) 320-2646

Which Oldcastle Models This Applies To

Oldcastle covers a lot of ground in kitchens. Their cabinet lines, countertop products, and component pieces show up across a wide spread of model and series numbers, and a part that fits one series often won’t fit another even when the two look identical at a glance. The model plate on Oldcastle cabinets usually sits inside the door or on the inside face of the cabinet box, not the front. If you can find it, read it before anything else. If the plate is gone, measure the opening and the door itself; Oldcastle changed hinge bore spacing and drawer glide mounting patterns across series names over the years, and a glide built for one series won’t seat cleanly in another. That’s the compatibility gotcha that catches most owners.

OEM Oldcastle parts are the exact replacement for your model line, and they fit without modification. Quality aftermarket equivalents exist for common components and can work well, but they’re not interchangeable across series and you need the dimensions right the first time. We’re an independent service provider, not affiliated with Oldcastle, so we source parts to match your specific model and never guess at fit. If you have the model number, we can usually match the part the same week.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Oldcastle Kitchen Remodeling Is Failing

  • Doors that won’t sit flush. The hinge has lost its tension or the mounting screws have pulled from the cabinet box. Once the box wood softens from a slow leak, no new hinge will hold.
  • A countertop seam that’s lifting or discoloring. The bonding has failed under the seam, or moisture has worked in from a sink edge. In San Francisco’s damp air, that seam becomes a small moisture trap and the problem moves fast.
  • Drawers that grind or sag. The glide is worn out or the drawer box has warped from humidity. A drawer that sticks halfway will eventually pull the slide loose from the cabinet.
  • Cabinet fronts with a dull or chalky finish. That’s usually the finish breaking down from years of steam, cooking oil, and sun through a west-facing window. It reads as cosmetic until the finish starts flaking at the edges.
  • Backsplash tiles that have loosened or grout that crumbles along the counter joint. Movement between the counter and the wall has opened the joint, and water gets behind the tile. This is the one that quietly rots the substrate if it’s left alone.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing in San Francisco, so you know what you’re budgeting for before we ever walk through the door:

Project Installed Price Range
Full kitchen remodel $16,520 – $53,100
Small kitchen remodel $10,620 – $23,600
Cabinet installation $4,720 – $15,340
Countertop installation $2,360 – $7,670
Backsplash installation $945 – $2,950
Kitchen island installation $3,540 – $11,800

What drives the range: cabinet layout and box material, countertop surface and edge profile, whether we’re tearing out old cabinetry or working around it, and the finish level on the backsplash. The number you see is the number you pay. That upfront pricing comes with a written line-item quote, and every job is backed by our 730-Day Done Right Promise. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.

DIY or Call Us?

You can safely check a few things yourself. Read the model plate, measure your doors and drawers, and look for clear signs of water damage around the sink and backsplash joints. What you shouldn’t do is pull a countertop or try to reset a cabinet box on your own, because both are heavy, both can fail without warning, and a mis-set countertop can crack the surface you’re trying to save. If a drawer glide or hinge needs a straight swap and the model number matches, that’s an honest candidate for DIY. Anything structural, anything that means moving a counter, and anything involving water damage, bring in a trained tech. Our technicians have up to 12 years of experience, they’re background-checked and uniformed, and calls are answered by a live person 24/7. Call (866) 320-2646 and we’ll tell you honestly whether it’s a DIY job or a call-us job.

FAQs

How long should an Oldcastle kitchen component last in San Francisco? Most Oldcastle cabinet and countertop components hold up 15 to 20 years or more in normal use. San Francisco’s damp air shortens that on humid or poorly ventilated kitchens, so expect 10 to 15 years for cabinet fronts in a tight kitchen with a lot of steam.

Can I repair an Oldcastle kitchen part instead of replacing it? Often yes. Hinges, drawer glides, and backsplash joints can frequently be repaired or rebuilt without replacing the cabinet. A cracked countertop or a warped cabinet box is the point where replacement is the honest answer, and we’ll tell you which one it is.

How long does the swap take? A single part swap (a hinge, a glide, a backsplash section) usually takes a few hours and is done in one visit. A full cabinet installation runs a few days, and a full kitchen remodel takes considerably longer. Most single-part jobs are completed same-visit, which means one appointment and no return trips.

How do you source Oldcastle parts? We match the part to your Oldcastle model number and series, then source it to fit. If we can’t confirm the model, we measure the opening and the door directly. Either way, you get the right part the first time, and the work is covered by our 730-Day Done Right Promise.

We work with Oldcastle, and we also install KraftMaid, Cambria, and Silestone when you’re ready to upgrade the whole kitchen. Ready to get a real number? Call (866) 320-2646 to schedule your free estimate with Groundwork Construction Co. of San Francisco. We’ll pull the model plate with you, quote it line by line, and put the price in writing.

Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch